From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Thu, 16 Apr 2015 13:02:35 -0700 Subject: [U-Boot] [PATCH] arm:ls1021a: Reserve secure code into RAM instead of OCRAM In-Reply-To: <1427189257-18214-1-git-send-email-Zhuoyu.Zhang@freescale.com> References: <1427189257-18214-1-git-send-email-Zhuoyu.Zhang@freescale.com> Message-ID: <5530155B.5060509@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 03/24/2015 02:27 AM, Zhuoyu Zhang wrote: > For ls1021a, Reserve secure code in to memory in case OCRAM > is needed by other usage. > > Signed-off-by: Zhuoyu Zhang > --- > include/configs/ls1021aqds.h | 1 - > include/configs/ls1021atwr.h | 1 - > 2 files changed, 2 deletions(-) > > diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h > index 3dc4da3..42439a4 100644 > --- a/include/configs/ls1021aqds.h > +++ b/include/configs/ls1021aqds.h > @@ -554,7 +554,6 @@ unsigned long get_board_ddr_clk(void); > #define CONFIG_LS102XA_NS_ACCESS > #define CONFIG_SMP_PEN_ADDR 0x01ee0200 > #define CONFIG_TIMER_CLK_FREQ 12500000 > -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR > > #define CONFIG_HWCONFIG > #define HWCONFIG_BUFFER_SIZE 128 > diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h > index a13876b..dccc661 100644 > --- a/include/configs/ls1021atwr.h > +++ b/include/configs/ls1021atwr.h > @@ -347,7 +347,6 @@ > #define CONFIG_LS102XA_NS_ACCESS > #define CONFIG_SMP_PEN_ADDR 0x01ee0200 > #define CONFIG_TIMER_CLK_FREQ 12500000 > -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR > > #define CONFIG_HWCONFIG > #define HWCONFIG_BUFFER_SIZE 128 > Zhuoyu, I don't see how the secure code is reserved in RAM. You only remove CONFIG_ARMV7_SECURE_BASE. Did I miss something? York