From: Jan Kiszka <jan.kiszka@siemens.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 14.5/15] tegra: Keep virt support disabled by default
Date: Fri, 17 Apr 2015 08:56:55 +0200 [thread overview]
Message-ID: <5530AEB7.4030202@siemens.com> (raw)
In-Reply-To: <cover.1428900500.git.jan.kiszka@siemens.com>
Upstream Linux is broken with default configs when PSCI is enabled.
So the user should explicitly enable virtualization, e.g. when she
disabled CONFIG_CPU_IDLE in Linux (in which case it's safe to use). We
can revert this workaround once Linux got fixed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
arch/arm/cpu/armv7/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index 61e7c82..e5d4dcc 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -27,7 +27,7 @@ config ARMV7_BOOT_SEC_DEFAULT
config ARMV7_VIRT
boolean "Enable support for hardware virtualization" if EXPERT
depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC
- default y
+ default y if !TEGRA
---help---
Say Y here to boot in hypervisor (HYP) mode when booting non-secure.
--
2.1.4
prev parent reply other threads:[~2015-04-17 6:56 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-13 4:48 [U-Boot] [PATCH v6 00/15] Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 01/15] sun7i: Remove duplicate call to psci_arch_init Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 02/15] ARM: Factor out common psci_get_cpu_id Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 03/15] ARM: Factor out reusable psci_cpu_off_common Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 04/15] ARM: Factor out reusable psci_cpu_entry Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 05/15] ARM: Factor out reusable psci_get_cpu_stack_top Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 06/15] ARM: Put target PC for PSCI CPU_ON on per-CPU stack Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 07/15] tegra124: Add more registers to struct mc_ctlr Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 08/15] virt-dt: Allow reservation of secure region when in a RAM carveout Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 09/15] tegra: Make tegra_powergate_power_on public Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 10/15] tegra: Add ap_pm_init hook Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 11/15] tegra124: Add PSCI support for Tegra124 Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 12/15] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0 Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 13/15] tegra: Set CNTFRQ for secondary CPUs Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 14/15] ARM: tegra: Enable SMMU when going non-secure Jan Kiszka
2015-04-13 4:48 ` [U-Boot] [PATCH v6 15/15] jetson-tk1: Add PSCI configuration options and reserve secure code Jan Kiszka
2015-04-14 13:46 ` [U-Boot] [PATCH v6 00/15] Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix Tom Rini
2015-04-14 14:06 ` Stephen Warren
2015-04-14 14:12 ` Jan Kiszka
2015-04-14 14:21 ` Stephen Warren
2015-04-14 14:30 ` Ian Campbell
2015-04-14 14:33 ` Jan Kiszka
2015-04-14 14:40 ` Ian Campbell
2015-04-14 14:45 ` Jan Kiszka
2015-04-14 14:50 ` Stephen Warren
2015-04-14 15:05 ` Jan Kiszka
2015-04-14 14:35 ` Stephen Warren
2015-04-17 6:47 ` Jan Kiszka
2015-04-17 13:57 ` Stephen Warren
2015-04-17 14:02 ` Jan Kiszka
2015-04-17 14:12 ` Stephen Warren
2015-04-17 14:20 ` Jan Kiszka
2015-04-17 14:43 ` Stephen Warren
2015-04-18 11:42 ` Jan Kiszka
2015-04-17 14:04 ` Ian Campbell
2015-04-17 6:56 ` Jan Kiszka [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5530AEB7.4030202@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox