From mboxrd@z Thu Jan  1 00:00:00 1970
From: Przemyslaw Marczak <p.marczak@samsung.com>
Date: Thu, 23 Apr 2015 14:36:35 +0200
Subject: [U-Boot] [PATCH v4 11/16] dm: regulator: add fixed voltage
	regulator driver
In-Reply-To: <5538E62E.4060201@samsung.com>
References: <1427229051-20170-1-git-send-email-p.marczak@samsung.com>
 <1429553273-6453-1-git-send-email-p.marczak@samsung.com>
 <1429553273-6453-12-git-send-email-p.marczak@samsung.com>
 <5538E62E.4060201@samsung.com>
Message-ID: <5538E753.5000904@samsung.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

+CC Simon

On 04/23/2015 02:31 PM, Przemyslaw Marczak wrote:
> Hello Simon,
>
> On 04/20/2015 08:07 PM, Przemyslaw Marczak wrote:
>> This driver implements regulator operations for fixed Voltage/Current
>> value regulators. beside the standard regulator constraints, which are
>> put into the uclass platform data, a typical fixed regulator node
>> provides
>> few additional properties like:
>> - gpio
>> - gpio-open-drain
>> - enable-active-high
>> - startup-delay-us
>> The only 'gpio' is used by this driver and is kept in structure of type
>> 'fixed_regulator_platdata', as a device platform data (dev->platdata).
>>
>> The driver implements:
>> - get_value
>> - get_current
>> - get_enable
>> - set_enable
>>
>> The regulator calls and commands can be used for fixed-regulator devices,
>> and the proper error will be returned for prohibited.
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
>>
>
> I missed the separation (---) here and I see that you add ACK below the
> changes.
> Could you remove them from the tree?
>

[...]

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com