[U-Boot] [PATCH v5 0/28] Adding LS2085AQDS and RDB

[York Sun <yorksun@freescale.com>]

On 03/20/2015 07:28 PM, York Sun wrote:
> This set adds necessary support in common ls2085a support and board
> support for QDS and RDB.
> 
> Changes in v5:
>   Re-generate patches using patman default flags
>   s/LayerScape/Layerscape/g
>   Fix board README for inconsistent SoC name
>   Fix comment in board header file
>   s/LS2080/LS2085/g
>   Fix Kconfig help for inconsistent SoC name
>   Update LS2085AQDS README to include instructions to form NAND image
>   Update LS2085ARDB README to include instructions to form NAND image
> 
> Changes in v4:
>   Remove temporary variable cntfrq.
>   Fix board README for inconsistent SoC name
>   Fix comments in board header file
>   Update MAINTAINERS file
>   Update MAINTAINERS file
> 
> Changes in v3:
>   Move secondary core fix to mp.c.
>   Replace hard-coded value with COUNTER_FREQUENCY.
> 
> Changes in v2:
>   Rebase after adding macros CONFIG_SYS_I2C_MXC_I2C3 in another patch set
>   Fix CNTFRQ for secondary cores when COUNTER_FREQUENCY_REAL is defined.
>   Add comment to I2C workaround
> 
> Bhupesh Sharma (1):
>   armv8/fsl-ch3: Add support to print RCW configuration
> 
> J. German Rivera (2):
>   drivers/fsl-mc: Changed MC firmware loading for new boot architecture
>   drivers/fsl-mc: Autoload AOIP image from NOR flash
> 
> Jaiprakash Singh (1):
>   driver/ifc: Add 64KB page support
> 
> Minghuan Lian (1):
>   armv8: Add SerDes framework for Layerscape Architecture
> 
> Prabhakar Kushwaha (4):
>   armv8/ls2085a: Update common header file
>   driver/ldpaa_eth: Update ldpaa ethernet driver
>   driver/ldpaa: Add support of WRIOP static data structure
>   board/ls2085qds: Add support ethernet
> 
> Scott Wood (8):
>   armv8/fsl-lsch3: Set nodes in DVM domain
>   fsl-lsch3: Introduce place for common early SoC init
>   armv8/ls2085a: Add workaround for USB erratum A-008751
>   armv8/fsl-lsch3: Use correct compatible for serial clock fixup
>   armv8/fsl-lsch3: Enable system error aborts
>   armv8/ls2085aqds: NAND boot support
>   freescale/qixis: Add support for booting from NAND
>   armv8/ls2085ardb: Enable NAND SPL support
> 
> Shaohui Xie (1):
>   net/memac_phy: reuse driver for little endian SoCs
> 
> Yangbo Lu (1):
>   ls2085a: esdhc: Add esdhc support for ls2085a
> 
> York Sun (7):
>   armv8/fsl-lsch3: Implement workaround for erratum A008585
>   armv8/fsl-lsch3: Fix platform clock calculation
>   armv8/ls2085a: Fix generic timer clock source
>   armv8/fsl-lsch3: Update early MMU table
>   armv8/ls2085aqds: Add support of LS2085AQDS platform
>   armv8/ls2085ardb: Add support of LS2085ARDB platform
>   armv8/fsl-lsch3: Implement workaround for I2C issue
> 
> pankaj chauhan (2):
>   armv8/ls2085a: Add support for reset request
>   net/phy/cortina: Fix compilation warning
> 

This set (except 17/28 and 21/28) is applied to fsl-qoriq master, awaiting upstream.

[U-Boot,v5,01/28] armv8/fsl-lsch3: Implement workaround for erratum A008585
[U-Boot,v5,02/28] armv8/ls2085a: Update common header file
[U-Boot,v5,03/28] armv8/fsl-lsch3: Fix platform clock calculation
[U-Boot,v5,04/28] armv8/ls2085a: Fix generic timer clock source
[U-Boot,v5,05/28] armv8/ls2085a: Add support for reset request
[U-Boot,v5,06/28] armv8/fsl-lsch3: Set nodes in DVM domain
[U-Boot,v5,07/28] armv8/fsl-lsch3: Update early MMU table
[U-Boot,v5,08/28] fsl-lsch3: Introduce place for common early SoC init
[U-Boot,v5,09/28] armv8/ls2085a: Add workaround for USB erratum A-008751
[U-Boot,v5,10/28] armv8/fsl-lsch3: Use correct compatible for serial clock fixup
[U-Boot,v5,11/28] driver/ldpaa_eth: Update ldpaa ethernet driver
[U-Boot,v5,12/28] armv8: Add SerDes framework for Layerscape Architecture
[U-Boot,v5,13/28] net/phy/cortina: Fix compilation warning
[U-Boot,v5,14/28] drivers/fsl-mc: Changed MC firmware loading for new boot
architecture
[U-Boot,v5,15/28] net/memac_phy: reuse driver for little endian SoCs
[U-Boot,v5,16/28] armv8/fsl-ch3: Add support to print RCW configuration
[U-Boot,v5,18/28] driver/ldpaa: Add support of WRIOP static data structure
[U-Boot,v5,19/28] armv8/ls2085aqds: Add support of LS2085AQDS platform
[U-Boot,v5,20/28] armv8/ls2085ardb: Add support of LS2085ARDB platform
[U-Boot,v5,22/28] board/ls2085qds: Add support ethernet
[U-Boot,v5,23/28] driver/ifc: Add 64KB page support
[U-Boot,v9,24/28] armv8/ls2085aqds: NAND boot support
[U-Boot,v5,25/28] freescale/qixis: Add support for booting from NAND
[U-Boot,v9,26/28] armv8/ls2085ardb: Enable NAND SPL support
[U-Boot,v5,27/28] ls2085a: esdhc: Add esdhc support for ls2085a
[U-Boot,v6,28/28] armv8/fsl-lsch3: Implement workaround for I2C erratum A009203

York