[U-Boot] [RFC PATCH v2] arm: mx6: Clamp MMDC and DDR3 clocks for timing calculations

[Stefano Babic <sbabic@denx.de>]

On 22/04/2015 17:37, Nikolay Dimitrov wrote:
> This is proposal for clamping the MMDC/DDR3 clocks to the maximum supported
> frequencies as per imx6 SOC models, and for dynamically calculating valid
> clock value based on mem_speed.
> 
> Currently the code uses impossible values for mem_speed (1333, 1600 MT/s) for
> calculating the DDR timings, and uses fixed clock (528 or 400 MHz) which
> doesn't take into account DDR3 memory limitations.
> 
> Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Tim Harvey <tharvey@gateworks.com>
> Cc: Eric Nelson <eric.nelson@boundarydevices.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================