From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sat, 02 May 2015 10:54:13 +0200 Subject: [U-Boot] mx6cuboxi: PHY/FEC detection In-Reply-To: <87iocbu9it.fsf@aikidev.net> References: <1430357292-8062-1-git-send-email-festevam@gmail.com> <1430357292-8062-2-git-send-email-festevam@gmail.com> <87d22lux28.fsf@aikidev.net> <874mnxuulr.fsf@aikidev.net> <87y4l9tbuq.fsf@aikidev.net> <87vbgcu9q9.fsf@aikidev.net> <55432C40.6060508@denx.de> <87oam4tglo.fsf@aikidev.net> <87iocbu9it.fsf@aikidev.net> Message-ID: <554490B5.2090002@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, Vagrant, On 02/05/2015 02:07, Vagrant Cascadian wrote: > On 2015-05-01, Fabio Estevam wrote: >> On Fri, May 1, 2015 at 5:20 PM, Fabio Estevam wrote: >> >>> Looking at Solid-run's tree they have the following commit that may be >>> related to this PHY issue: >> >> I applied Rabeeh's patch on top of this v2 series and generated the >> two attached patches. >> >> Could you please give them a try and let us know if it fixes the >> Ethernet PHY detect issue? > > After some brief testing with these two patches, it seems to be > working. After trying various methods (cold boot, reset from u-boot > prompt several consecutive times, reboot from linux several times), it > seems to consistantly detect the PHY. > Good work ! I apply V2, then. Can you also send to a ML the two additional patches from your previous e-mail ? They are not tracked properly by patchwork. Thanks, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================