From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Sat, 02 May 2015 11:15:37 +0200
Subject: [U-Boot] [PATCH v2 1/4] mx6cuboxi: Add HDMI output support
In-Reply-To: <1430357292-8062-1-git-send-email-festevam@gmail.com>
References: <1430357292-8062-1-git-send-email-festevam@gmail.com>
Message-ID: <554495B9.6000001@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 30/04/2015 03:28, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Add HDMI output using PLL5 as the source for the IPU clocks,
> and accurate VESA timings.
> 
> These settings are based on the patch from Soeren Moch <smoch@web.de>
> submitted for the tbs2910 mx6 based board.
> 
> It allows the display to work properly at 1024x768 at 60.
> 
> This should make the hdmi output signal compatible with most if not all
> modern displays.
> 
> Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Tested-by: Tom Rini <trini@konsulko.com>
> ---


Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================