From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 04 May 2015 08:19:59 +0200 Subject: [U-Boot] mx6cuboxi: PHY/FEC detection In-Reply-To: References: <1430357292-8062-1-git-send-email-festevam@gmail.com> <1430357292-8062-2-git-send-email-festevam@gmail.com> <87d22lux28.fsf@aikidev.net> <874mnxuulr.fsf@aikidev.net> <87y4l9tbuq.fsf@aikidev.net> <87vbgcu9q9.fsf@aikidev.net> <55432C40.6060508@denx.de> <87oam4tglo.fsf@aikidev.net> <87iocbu9it.fsf@aikidev.net> <554490B5.2090002@denx.de> Message-ID: <55470F8F.7030904@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 04/05/2015 05:24, Fabio Estevam wrote: > On Sat, May 2, 2015 at 11:12 AM, Fabio Estevam wrote: >> Hi Stefano and Vagrant, >> >> On Sat, May 2, 2015 at 5:54 AM, Stefano Babic wrote: >> >>> Good work ! I apply V2, then. Can you also send to a ML the two >>> additional patches from your previous e-mail ? They are not tracked >>> properly by patchwork. >> >> Thanks for testing the patches, Vagrant. >> >> I will submit them to the list next week after testing on a mx28evk. >> Just want to make sure FEC still works fine on that platform as well. > > After thinking more about these patches, there is no need to touch the > fec driver for allowing the PHY to be probed at a different address. > We have phy_find_by_mask(), which suits for this exact purpose, so I > will send a patch using the existing infrastructure. > You're right, this is the best approach. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================