From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 04 May 2015 18:09:31 +0200 Subject: [U-Boot] [PATCH v2 2/2] mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1 In-Reply-To: <1430749376-6918-2-git-send-email-fabio.estevam@freescale.com> References: <1430749376-6918-1-git-send-email-fabio.estevam@freescale.com> <1430749376-6918-2-git-send-email-fabio.estevam@freescale.com> Message-ID: <554799BB.8050901@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, On 04/05/2015 16:22, Fabio Estevam wrote: > Configure PAD_ENET_RXD0/RXD1 pads as pull down because these pads are directly > connected to the Atheros 8035/8030 although they should be functional > only in the RMII mode - 8030. > > Signed-off-by: Rabeeh Khoury > Signed-off-by: Fabio Estevam > --- Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================