From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Tue, 5 May 2015 09:33:37 -0700 Subject: [U-Boot] [PATCH v4] powerpc/t1023rdb: Add T1023 RDB board support In-Reply-To: <1427442514-46634-1-git-send-email-Shengzhou.Liu@freescale.com> References: <1427442514-46634-1-git-send-email-Shengzhou.Liu@freescale.com> Message-ID: <5548F0E1.4050803@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 03/27/2015 12:48 AM, Shengzhou Liu wrote: > T1023RDB is a Freescale Reference Design Board that hosts the T1023 SoC. > > T1023RDB board Overview > ----------------------- > - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz > - CoreNet fabric supporting coherent and noncoherent transactions with > prioritization and bandwidth allocation > - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC > - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC > - Ethernet interfaces: > - one 1G RGMII port on-board(RTL8211F PHY) > - one 1G SGMII port on-board(RTL8211F PHY) > - one 2.5G SGMII port on-board(AQR105 PHY) > - PCIe: Two Mini-PCIe connectors on-board. > - SerDes: 4 lanes up to 10.3125GHz > - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash > - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash > - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash. > - USB: one Type-A USB 2.0 port with internal PHY > - eSDHC: support SD/MMC card and eMMC on-board > - 256Kbit M24256 I2C EEPROM > - RTC: Real-time clock DS1339 on I2C bus > - UART: one serial port on-board with RJ45 connector > - Debugging: JTAG/COP for T1023 debugging > > As well updated T1024RDB to add T1023RDB. > > Signed-off-by: Shengzhou Liu > --- > v4: squashed ddr patch to this one. > v3: updated readme. > v2: updated the printout of serdes refclk. > Applied to u-boot-mpc85xx master. Awaiting upstream. York