From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-mpc85xx master
Date: Tue, 5 May 2015 09:55:43 -0700 [thread overview]
Message-ID: <5548F60F.5040307@freescale.com> (raw)
Tom,
The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:
Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze (2015-04-29
06:46:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to 8b0044ff5942943eaa49935f49d5006b346a60f8:
powerpc/mpc85xx: Add board support for ucp1020 (2015-05-04 09:26:26 -0700)
----------------------------------------------------------------
Chunhe Lan (1):
powerpc/t4rdb: Add SD boot support for T4240RDB board
Minghuan Lian (1):
fsl/pci: Set CFG_READY for PCIe v3.0 and later
Nikhil Badola (1):
drivers: usb: fsl: Workaround for Erratum A004477
Oleksandr G Zhadan (2):
powerpc/mpc85xx: Fix compiling error for common/cmd_gpio.c
powerpc/mpc85xx: Add board support for ucp1020
Scott Wood (2):
powerpc/mpc85xx: Use GOT when loading IVORs post-relocation
powerpc/mpc85xx: Don't deref NULL if qman portal lacks cell-index
Shaohui Xie (1):
powerpc/t4240qds: Update RCW, defconfig and maintainer
Shengzhou Liu (4):
powerpc/t1023rdb: Add T1023 RDB board support
board/t102x: use fdt_setprop_string instead of fdt_setprop
board/t2080rdb: reset cs4315 phy
t2080rdb/rcw: update ddr frequency from 1600MT/s to 1867MT/s
Tang Yuantian (1):
fsl/deepsleep: avoid the DDR restore from being optimized out
Valentin Longchamp (1):
powerpc: add 2 common dcache assembly functions
Yangbo Lu (4):
mmc: fsl_esdhc: Add adapter card type identification support
powerpc/t2080qds: enable eSDHC adapter card type identification
mmc: fsl_esdhc: Add peripheral clock support
powerpc/t2080qds: enable eSDHC peripheral clock support
York Sun (1):
mpc85xx/T4240EMU: Remove T4240EMU board
Zhao Qiang (1):
T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue
arch/powerpc/cpu/mpc512x/Makefile | 3 -
arch/powerpc/cpu/mpc512x/cache.c | 17 -
arch/powerpc/cpu/mpc5xxx/Makefile | 1 -
arch/powerpc/cpu/mpc5xxx/cache.c | 15 -
arch/powerpc/cpu/mpc83xx/Makefile | 3 -
arch/powerpc/cpu/mpc83xx/cache.c | 17 -
arch/powerpc/cpu/mpc85xx/Kconfig | 8 +-
arch/powerpc/cpu/mpc85xx/Makefile | 3 -
arch/powerpc/cpu/mpc85xx/cache.c | 17 -
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +
arch/powerpc/cpu/mpc85xx/portals.c | 9 +-
arch/powerpc/cpu/mpc85xx/speed.c | 49 +-
arch/powerpc/cpu/mpc85xx/start.S | 35 +-
arch/powerpc/cpu/mpc86xx/cache.S | 45 --
arch/powerpc/cpu/ppc4xx/cache.S | 43 --
arch/powerpc/include/asm/arch-mpc85xx/gpio.h | 2 +
arch/powerpc/include/asm/config_mpc85xx.h | 16 +-
arch/powerpc/include/asm/fsl_pci.h | 1 +
arch/powerpc/include/asm/global_data.h | 3 +
arch/powerpc/include/asm/mpc85xx_gpio.h | 6 +-
arch/powerpc/lib/ppccache.S | 48 ++
board/Arcturus/ucp1020/Kconfig | 44 ++
board/Arcturus/ucp1020/MAINTAINERS | 7 +
board/Arcturus/ucp1020/Makefile | 33 +
board/Arcturus/ucp1020/README | 54 ++
board/Arcturus/ucp1020/cmd_arc.c | 231 ++++++
board/Arcturus/ucp1020/ddr.c | 161 ++++
board/Arcturus/ucp1020/law.c | 25 +
board/Arcturus/ucp1020/spl.c | 126 ++++
board/Arcturus/ucp1020/spl_minimal.c | 67 ++
board/Arcturus/ucp1020/tlb.c | 101 +++
board/Arcturus/ucp1020/ucp1020.c | 363 +++++++++
board/Arcturus/ucp1020/ucp1020.h | 44 ++
board/freescale/common/mpc85xx_sleep.c | 8 +-
board/freescale/common/qixis.h | 14 +
board/freescale/t102xqds/eth_t102xqds.c | 9 +-
board/freescale/t102xrdb/MAINTAINERS | 5 +
board/freescale/t102xrdb/Makefile | 2 +-
board/freescale/t102xrdb/README | 97 ++-
board/freescale/t102xrdb/ddr.c | 78 +-
board/freescale/t102xrdb/eth_t102xrdb.c | 31 +-
board/freescale/t102xrdb/t1023_rcw.cfg | 8 +
board/freescale/t102xrdb/t102xrdb.c | 93 ++-
board/freescale/t102xrdb/t102xrdb.h | 4 +-
board/freescale/t208xrdb/cpld.h | 3 +
board/freescale/t208xrdb/t2080_rcw.cfg | 5 +-
board/freescale/t208xrdb/t208xrdb.c | 7 +
board/freescale/t4qds/Kconfig | 13 -
board/freescale/t4qds/MAINTAINERS | 10 +-
board/freescale/t4qds/Makefile | 1 -
board/freescale/t4qds/ddr.h | 26 -
board/freescale/t4qds/t4_rcw.cfg | 2 +-
board/freescale/t4rdb/MAINTAINERS | 1 +
board/freescale/t4rdb/Makefile | 6 +-
board/freescale/t4rdb/ddr.c | 6 +-
board/freescale/t4rdb/spl.c | 95 +++
board/freescale/t4rdb/t4_pbi.cfg | 3 -
board/freescale/t4rdb/t4_rcw.cfg | 6 +-
board/freescale/t4rdb/tlb.c | 8 +
configs/T1023RDB_NAND_defconfig | 5 +
configs/T1023RDB_SDCARD_defconfig | 5 +
configs/T1023RDB_SECURE_BOOT_defconfig | 4 +
configs/T1023RDB_SPIFLASH_defconfig | 5 +
configs/T1023RDB_defconfig | 4 +
configs/T1024RDB_NAND_defconfig | 2 +-
configs/T1024RDB_SDCARD_defconfig | 2 +-
configs/T1024RDB_SECURE_BOOT_defconfig | 2 +-
configs/T1024RDB_SPIFLASH_defconfig | 2 +-
configs/T1024RDB_defconfig | 2 +-
configs/T4160QDS_SPIFLASH_defconfig | 4 -
configs/T4240EMU_defconfig | 4 -
configs/T4240QDS_SPIFLASH_defconfig | 4 -
configs/T4240RDB_SDCARD_defconfig | 5 +
configs/UCP1020_SPIFLASH_defconfig | 6 +
configs/UCP1020_defconfig | 5 +
doc/README.fsl-esdhc | 28 +-
drivers/mmc/fsl_esdhc.c | 79 +-
drivers/mmc/mmc.c | 6 +
drivers/mmc/mmc_private.h | 3 +
drivers/pci/fsl_pci_init.c | 23 +-
drivers/usb/host/ehci-fsl.c | 10 +
include/configs/T102xRDB.h | 79 +-
include/configs/T208xQDS.h | 3 +
include/configs/T4240EMU.h | 181 -----
include/configs/T4240RDB.h | 71 +-
include/configs/UCP1020.h | 1027 ++++++++++++++++++++++++++
include/e500.h | 1 +
include/fsl_esdhc.h | 8 +
include/fsl_usb.h | 29 +
89 files changed, 3241 insertions(+), 510 deletions(-)
delete mode 100644 arch/powerpc/cpu/mpc512x/cache.c
delete mode 100644 arch/powerpc/cpu/mpc5xxx/cache.c
delete mode 100644 arch/powerpc/cpu/mpc83xx/cache.c
delete mode 100644 arch/powerpc/cpu/mpc85xx/cache.c
create mode 100644 board/Arcturus/ucp1020/Kconfig
create mode 100644 board/Arcturus/ucp1020/MAINTAINERS
create mode 100644 board/Arcturus/ucp1020/Makefile
create mode 100644 board/Arcturus/ucp1020/README
create mode 100644 board/Arcturus/ucp1020/cmd_arc.c
create mode 100644 board/Arcturus/ucp1020/ddr.c
create mode 100644 board/Arcturus/ucp1020/law.c
create mode 100644 board/Arcturus/ucp1020/spl.c
create mode 100644 board/Arcturus/ucp1020/spl_minimal.c
create mode 100644 board/Arcturus/ucp1020/tlb.c
create mode 100644 board/Arcturus/ucp1020/ucp1020.c
create mode 100644 board/Arcturus/ucp1020/ucp1020.h
create mode 100644 board/freescale/t102xrdb/t1023_rcw.cfg
create mode 100644 board/freescale/t4rdb/spl.c
create mode 100644 configs/T1023RDB_NAND_defconfig
create mode 100644 configs/T1023RDB_SDCARD_defconfig
create mode 100644 configs/T1023RDB_SECURE_BOOT_defconfig
create mode 100644 configs/T1023RDB_SPIFLASH_defconfig
create mode 100644 configs/T1023RDB_defconfig
delete mode 100644 configs/T4160QDS_SPIFLASH_defconfig
delete mode 100644 configs/T4240EMU_defconfig
delete mode 100644 configs/T4240QDS_SPIFLASH_defconfig
create mode 100644 configs/T4240RDB_SDCARD_defconfig
create mode 100644 configs/UCP1020_SPIFLASH_defconfig
create mode 100644 configs/UCP1020_defconfig
delete mode 100644 include/configs/T4240EMU.h
create mode 100644 include/configs/UCP1020.h
Thanks.
York
next reply other threads:[~2015-05-05 16:55 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-05 16:55 York Sun [this message]
2015-05-05 23:59 ` [U-Boot] Please pull u-boot-mpc85xx master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-01-24 16:25 York Sun
2019-01-25 15:16 ` Tom Rini
2018-10-30 19:21 York Sun
2018-10-31 14:44 ` Tom Rini
2018-09-28 15:35 York Sun
2018-09-30 2:27 ` Tom Rini
2018-07-31 17:25 York Sun
2018-08-01 15:05 ` Tom Rini
2018-07-31 17:12 York Sun
2018-07-31 17:16 ` York Sun
2017-12-08 16:59 York Sun
2017-12-09 1:35 ` Tom Rini
2017-06-13 17:02 York Sun
2017-06-15 13:01 ` Tom Rini
2017-02-01 16:19 york sun
2017-02-02 3:20 ` Tom Rini
2017-01-25 5:26 york sun
2017-01-26 3:00 ` Tom Rini
2016-12-20 17:15 york sun
2016-12-22 2:30 ` Tom Rini
2016-12-04 17:02 york sun
2016-12-04 23:00 ` Tom Rini
2016-11-29 22:18 york sun
2016-11-30 14:12 ` Tom Rini
2016-10-15 17:02 york sun
2016-10-18 0:08 ` Tom Rini
2016-07-22 0:17 york sun
2016-07-23 0:09 ` Tom Rini
2016-07-25 18:52 ` Scott Wood
2016-07-25 19:02 ` york sun
2016-06-04 16:03 York Sun
2016-06-06 11:16 ` Tom Rini
2016-05-25 3:37 York Sun
2016-05-26 15:49 ` Tom Rini
2016-04-08 22:45 York Sun
2016-04-11 15:00 ` Tom Rini
2016-02-26 18:51 york sun
2016-02-26 19:09 ` Tom Rini
2016-01-25 20:49 york sun
2016-01-26 22:44 ` Tom Rini
[not found] <568BFBF0.3040605@freescale.com>
2016-01-05 18:21 ` York Sun
[not found] <563A9399.80500@freescale.com>
2015-11-04 23:45 ` Tom Rini
2015-11-02 21:06 York Sun
2015-11-02 23:17 ` Tom Rini
2015-09-02 15:26 York Sun
2015-09-02 21:58 ` Tom Rini
2015-07-31 16:00 York Sun
2015-08-01 14:47 ` Tom Rini
2015-04-20 21:05 York Sun
2015-04-22 15:52 ` Tom Rini
2015-03-05 20:20 York Sun
2015-03-06 15:43 ` Tom Rini
2015-01-23 0:49 York Sun
2015-01-23 21:57 ` Tom Rini
2014-12-16 17:24 York Sun
2014-12-17 0:45 ` Tom Rini
2014-12-05 16:10 York Sun
2014-12-08 21:41 ` Tom Rini
2014-07-23 20:19 York Sun
2014-07-28 19:03 ` Tom Rini
2014-06-05 21:30 York Sun
2014-06-05 22:50 ` Tom Rini
2014-05-16 22:12 York Sun
2014-05-19 12:47 ` Tom Rini
2014-04-23 22:45 York Sun
2014-04-25 19:44 ` Tom Rini
2014-02-03 17:04 York Sun
2014-02-04 22:05 ` Tom Rini
2014-01-03 23:57 York Sun
2014-01-07 17:16 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5548F60F.5040307@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox