From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 19 May 2015 15:20:12 +0200 Subject: [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux In-Reply-To: <1431927446-18335-1-git-send-email-Peng.Fan@freescale.com> References: <1431927446-18335-1-git-send-email-Peng.Fan@freescale.com> Message-ID: <555B388C.5040602@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Peng, On 18/05/2015 07:37, Peng Fan wrote: > Enable IOMUX_CONFIG_SION for all I2C pin mux settings, otherwise > we will get erros when doing i2c operations. > error log like the following: > " > wait_for_sr_state: failed sr=81 cr=a0 state=2020 > i2c_init_transfer: failed for chip 0xb retry=1 > " > > Signed-off-by: Peng Fan > --- Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================