From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Niebel Date: Wed, 20 May 2015 16:43:09 +0200 Subject: [U-Boot] [Patch v3 0/4] imx: mx6: use OTP for teperature grade info In-Reply-To: <1431957407-24920-1-git-send-email-tharvey@gateworks.com> References: <1431957407-24920-1-git-send-email-tharvey@gateworks.com> Message-ID: <555C9D7D.6080807@tqsc.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 18.05.2015 um 15:56 schrieb Tim Harvey: > Use Temperature grade info in OTP/eFUSE for thermal management and display of > thermal data. > > Cc: Stefan Roese > Cc: Eric Nelson > Cc: Heiko Schocher > Cc: Nikita Kiryanov > Cc: Jon Nettleton > Cc: Jason Liu > Cc: Ye Li > Cc: Fabio Estevam > Cc: Christian Gmeiner > Cc: Markus Niebel > Cc: Peng Fan > Signed-off-by: Tim Harvey > --- > v3: > - include display of temperature grade for IMX6SX > v2: > - split into two series: 1 for CPU frequency, other for Temperature grade > > Tim Harvey (4): > mx6: add OTP bank1 registers > imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from > OTP > imx: mx6: add display of CPU temperature grade in print_cpuinfo() > thermal: imx_thermal: use CPU temperature grade for trip points > > arch/arm/cpu/armv7/mx6/soc.c | 38 +++++++++++++++++++++++++++++++ > arch/arm/imx-common/cpu.c | 25 ++++++++++++++++---- > arch/arm/include/asm/arch-mx6/imx-regs.h | 19 ++++++++++++++++ > arch/arm/include/asm/arch-mx6/sys_proto.h | 1 + > drivers/thermal/imx_thermal.c | 29 +++++++++++++++-------- > include/imx_thermal.h | 6 +++++ > 6 files changed, 104 insertions(+), 14 deletions(-) > Tested on TQMa6Q and TQMa6D following patches were also applied: https://patchwork.ozlabs.org/patch/473405/ https://patchwork.ozlabs.org/patch/473406/ Tested-by: Markus Niebel