[U-Boot] [PATCH 1/2] nand: sunxi: change BLOCK_SIZE in mksunxiboot to match NAND block size

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 21-05-15 15:59, Roy Spliet wrote:
> From: Daniel Kochma?ski <dkochmanski@turtle-solutions.eu>
>
> This change is necessary to calculate correct checksum for NAND
> boot. Works both for MMC and NAND. Without it BROM rejects boot image
> as invalid (bad checksum). (Changes block size from 0x200 to 0x2000).
>
> V2: Document decision in source too
>
> Signed-off-by: Daniel Kochma?ski <dkochmanski@turtle-solutions.eu>
> Cc: Ian Campbell <ijc@hellion.org.uk>
> Cc: Hans De Goede <hdegoede@redhat.com>
> Signed-off-by: Roy Spliet <r.spliet@ultimaker.com>

Looks good: Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans


> ---
>   tools/mksunxiboot.c | 8 +++++++-
>   1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c
> index 0035f6e..3361251 100644
> --- a/tools/mksunxiboot.c
> +++ b/tools/mksunxiboot.c
> @@ -65,7 +65,13 @@ int gen_check_sum(struct boot_file_head *head_p)
>
>   #define SUN4I_SRAM_SIZE 0x7600	/* 0x7748+ is used by BROM */
>   #define SRAM_LOAD_MAX_SIZE (SUN4I_SRAM_SIZE - sizeof(struct boot_file_head))
> -#define BLOCK_SIZE 512
> +
> +/*
> + * BROM (at least on A10 and A20) requires NAND-images to be explicitly aligned
> + * to a multiple of 8K, and rejects the image otherwise. MMC-images are fine
> + * with 512B blocks. To cater for both, align to the largest of the two.
> + */
> +#define BLOCK_SIZE 0x2000
>
>   struct boot_img {
>   	struct boot_file_head header;
>