[U-Boot] [PATCH] mx6sabresd: Enable HDMI video in bootargs

[Nikolay Dimitrov <picmaster@mail.bg>]

Hi Fabio,

On 05/22/2015 10:28 PM, Fabio Estevam wrote:
> Hi Nikolay,
>
> On Fri, May 22, 2015 at 4:19 PM, Nikolay Dimitrov <picmaster@mail.bg> wrote:
>
>> +#define VIDEO_ARGS     "video=mxcfb0:dev=hdmi,1280x720M at 60,if=RGB24 " \
>> +                               "video=mxcfb1:off " \
>> +                               "video=mxcfb2:off " \
>> +                               "video=mxcfb3:off " \
>> +                               "fbmem=28M"
>> +
>
> This is too specific to the FSL kernel. For mainline kernel users,
> this is not needed and the strings would be different.
>
> I would suggest you to patch this in Yocto instead.

Thanks for your comments. I was thinking about what's the best way to
approach this need, and last time we discussed similar topic, I was
asked about upstreaming my changes... so here I am doing it.

Fixing it in u-boot-fslc or as a ad-hoc patch will also work for me.

Still - isn't the mainline kernel user expected to be able to use the
HDMI interface of the board?

Regards,
Nikolay