[U-Boot] [PATCH 08/10] imx6: standardise filesystem and boot options

[Soeren Moch <smoch@web.de>]

On 23.05.2015 01:06, Peter Robinson wrote:
> 
> On 22 May 2015 19:48, "Soeren Moch" <smoch at web.de <mailto:smoch@web.de>>
> wrote:
>>>
>>> Move all standard filesystem, partition and fdt options to mx6_common.
>>>
>>> Signed-off-by: Peter Robinson <pbrobinson@gmail.com
> <http://gmail.com>  <http://lists.denx.de/mailman/listinfo/u-boot>>
>>
>>
>> [...]
>>
>>
>>> diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
>>> index 07fc3e8..c323038 100644
>>> --- a/include/configs/mx6_common.h
>>> +++ b/include/configs/mx6_common.h
>>> @@ -67,6 +67,17 @@
>>>  #define CONFIG_CONS_INDEX       1
>>>  #define CONFIG_BAUDRATE         115200
>>>
>>> +/* Filesystems and image support */
>>> +#define CONFIG_OF_LIBFDT
>>> +#define CONFIG_CMD_BOOTZ
>>> +#define CONFIG_SUPPORT_RAW_INITRD
>>> +#define CONFIG_CMD_FS_GENERIC
>>> +#define CONFIG_DOS_PARTITION
>>> +#define CONFIG_CMD_EXT2
>>> +#define CONFIG_CMD_EXT4
>>> +#define CONFIG_CMD_EXT4_WRITE
>>> +#define CONFIG_CMD_FAT
>>> +
>>>  /* Miscellaneous configurable options */
>>>  #define CONFIG_SYS_NO_FLASH
>>>  #undef CONFIG_CMD_IMLS
>>
>>
>>
>> Peter,
>>
>> Thanks for fixing EFI_PARTITION in tbs2910.
>>
>> You still define CONFIG_CMD_EXT2 and CONFIG_CMD_EXT4, while
>> only CONFIG_CMD_EXT4 is required. That is not really a problem,
>> but since you are doing cleanup here...
>>
> 
> Yes, i looked at this and a good half were including ext2. I plan on
> doing another pass so I figure there's enough churn already in this
> series so get it merged and ensure there's no regression and then
> re-review.
> 

Ah ok, if you want to run ext2ls / ext2load you need CONFIG_CMD_EXT2
explicitly. I thought that this would also be enabled by CONFIG_CMD_EXT4
automatically.

Sorry for the noise,
 Soeren