From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 26 May 2015 13:27:14 +0200 Subject: [U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform In-Reply-To: <556227E2.1010104@toradex.com> References: <1431954389-6433-1-git-send-email-bhuvanchandra.dv@toradex.com> <556227E2.1010104@toradex.com> Message-ID: <55645892.9000005@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On 24/05/2015 21:34, Bhuvanchandra DV wrote: > Hello Stefano, > > On 05/18/2015 06:36 PM, Bhuvanchandra DV wrote: >> This patch-set adds GPIO driver, DSPI and device tree support >> for Freescale Vybrid platform and Toradex Colibri Vybrid VF50, >> VF61 modules. >> >> Following cases are tested with Vybrid GPIO driver: >> - with DM, without DT >> - with DM and DT >> Both the above cases were tested on Toradex Colibri Vybrid VF50, VF61 >> modules and both works fine. >> >> - The patchset is based and tested on the latest master branch. >> >> Bhuvanchandra DV (9): >> dm: gpio: uclass: Add flag to control sequence numbering >> dm: gpio: vf610: Add GPIO driver support >> colibri_vf: Add pinmux entries for GPIOs >> colibri_vf: Enable GPIO support >> arm: vf610: Add clock support for DSPI >> arm: vf610: Add iomux support for DSPI >> vf610: dts: Add device tree support >> colibri-vf: Enable SPI support >> colibri_vf: Add separate defconfig for device tree support >> >> Sanchayan Maity (2): >> usb: ehci-vf: Add weak function for board specific initialisation >> colibri_vf: Enable board specific USB initialisation for USB pen gpio > > Submitted these patches in single series, as few of the patches are > interdependent, thought it would be easy to keep them in same series. > > Shall we split this patchset as per the custodian maintainers to pick? > > Patchset 1: Add GPIO driver support for Freescale Vybrid platform, > enable support for GPIO support on Toradex Colibri VF50, VF61 modules. > > Patchset 2: Add device tree support for Freescale Vybrid Platform, > Toradex Colibri VF50, VF61 modules. > > Patchset 3: Add DSPI support for Toradex Colibri VF50, VF61 modules. > > Patchset 4: Add weak function for board specific USB initialization > for Freescale Vybrid platform. Generally, if a maintainer acks a patch, the patch could then be applied into another tree if this makes sense and avoid to introduce breakage, maybe in both trees. You patchset is related to u-boot-imx with exception for the USB part, but Marek has already acked it. I will check you patches soon, but I think it is ok if the whole patchset flows into u-boot-imx. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================