From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Tue, 26 May 2015 09:05:37 -0700 Subject: [U-Boot] [PATCH 08/20] armv8/ls2085a: Increase the supported kernel size In-Reply-To: <1431933236-10359-1-git-send-email-prabhakar@freescale.com> References: <1431933236-10359-1-git-send-email-prabhakar@freescale.com> Message-ID: <556499D1.5070001@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/18/2015 12:13 AM, Prabhakar Kushwaha wrote: > From: Bhupesh Sharma > > Increases the kernel size supported for LS2085A platforms:- > - Update environment variables > - Add ramdisk_size in bootargs env variable > - Define CONFIG_SYS_BOOTM_LEN to 64MB > > Signed-off-by: Bhupesh Sharma > Signed-off-by: Prabhakar Kushwaha > --- > include/configs/ls2085a_common.h | 9 ++++++--- > include/configs/ls2085aqds.h | 2 +- > include/configs/ls2085ardb.h | 2 +- > 3 files changed, 8 insertions(+), 5 deletions(-) > > diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h > index 749c58d..a33b8a9 100644 > --- a/include/configs/ls2085a_common.h > +++ b/include/configs/ls2085a_common.h > @@ -248,13 +248,13 @@ unsigned long long get_qixis_addr(void); > "initrd_high=0xffffffffffffffff\0" \ > "kernel_start=0x581200000\0" \ > "kernel_load=0xa0000000\0" \ > - "kernel_size=0x1000000\0" \ > + "kernel_size=0x2000000\0" \ > "console=ttyAMA0,38400n8\0" For my understanding, can you please explain how "kernel_size" variable is used? York