* [U-Boot] [PATCH 2/5] warp: Fix CONFIG_SYS_FSL_ESDHC_ADDR
2015-05-27 4:11 [U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE Fabio Estevam
@ 2015-05-27 4:11 ` Fabio Estevam
2015-05-28 9:54 ` Stefano Babic
2015-05-27 4:11 ` [U-Boot] [PATCH 3/5] warp: Enable CONFIG_SUPPORT_EMMC_BOOT Fabio Estevam
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2015-05-27 4:11 UTC (permalink / raw)
To: u-boot
From: Fabio Estevam <fabio.estevam@freescale.com>
Warp uses eMMC connected to esdhc2 port, so fix
CONFIG_SYS_FSL_ESDHC_ADDR to reflect that.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
include/configs/warp.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/warp.h b/include/configs/warp.h
index f0a912b..a67254e 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -25,7 +25,7 @@
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
#define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
--
1.9.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH 2/5] warp: Fix CONFIG_SYS_FSL_ESDHC_ADDR
2015-05-27 4:11 ` [U-Boot] [PATCH 2/5] warp: Fix CONFIG_SYS_FSL_ESDHC_ADDR Fabio Estevam
@ 2015-05-28 9:54 ` Stefano Babic
0 siblings, 0 replies; 10+ messages in thread
From: Stefano Babic @ 2015-05-28 9:54 UTC (permalink / raw)
To: u-boot
On 27/05/2015 06:11, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Warp uses eMMC connected to esdhc2 port, so fix
> CONFIG_SYS_FSL_ESDHC_ADDR to reflect that.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> include/configs/warp.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/configs/warp.h b/include/configs/warp.h
> index f0a912b..a67254e 100644
> --- a/include/configs/warp.h
> +++ b/include/configs/warp.h
> @@ -25,7 +25,7 @@
> #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
>
> /* MMC Configs */
> -#define CONFIG_SYS_FSL_ESDHC_ADDR 0
> +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
> #define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
> #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
>
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH 3/5] warp: Enable CONFIG_SUPPORT_EMMC_BOOT
2015-05-27 4:11 [U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE Fabio Estevam
2015-05-27 4:11 ` [U-Boot] [PATCH 2/5] warp: Fix CONFIG_SYS_FSL_ESDHC_ADDR Fabio Estevam
@ 2015-05-27 4:11 ` Fabio Estevam
2015-05-28 9:54 ` Stefano Babic
2015-05-27 4:11 ` [U-Boot] [PATCH 4/5] warp: Add fuse command support Fabio Estevam
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2015-05-27 4:11 UTC (permalink / raw)
To: u-boot
From: Fabio Estevam <fabio.estevam@freescale.com>
CONFIG_SUPPORT_EMMC_BOOT is important to enable the boot partition via
'mmc partconf 0 1 1 0' command, for example.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
include/configs/warp.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/warp.h b/include/configs/warp.h
index a67254e..5463c40 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -28,6 +28,7 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
#define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
+#define CONFIG_SUPPORT_EMMC_BOOT
/* Command definition */
#undef CONFIG_CMD_NET
--
1.9.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH 3/5] warp: Enable CONFIG_SUPPORT_EMMC_BOOT
2015-05-27 4:11 ` [U-Boot] [PATCH 3/5] warp: Enable CONFIG_SUPPORT_EMMC_BOOT Fabio Estevam
@ 2015-05-28 9:54 ` Stefano Babic
0 siblings, 0 replies; 10+ messages in thread
From: Stefano Babic @ 2015-05-28 9:54 UTC (permalink / raw)
To: u-boot
On 27/05/2015 06:11, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> CONFIG_SUPPORT_EMMC_BOOT is important to enable the boot partition via
> 'mmc partconf 0 1 1 0' command, for example.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> include/configs/warp.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/configs/warp.h b/include/configs/warp.h
> index a67254e..5463c40 100644
> --- a/include/configs/warp.h
> +++ b/include/configs/warp.h
> @@ -28,6 +28,7 @@
> #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
> #define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
> #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
> +#define CONFIG_SUPPORT_EMMC_BOOT
>
> /* Command definition */
> #undef CONFIG_CMD_NET
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH 4/5] warp: Add fuse command support
2015-05-27 4:11 [U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE Fabio Estevam
2015-05-27 4:11 ` [U-Boot] [PATCH 2/5] warp: Fix CONFIG_SYS_FSL_ESDHC_ADDR Fabio Estevam
2015-05-27 4:11 ` [U-Boot] [PATCH 3/5] warp: Enable CONFIG_SUPPORT_EMMC_BOOT Fabio Estevam
@ 2015-05-27 4:11 ` Fabio Estevam
2015-05-28 9:54 ` Stefano Babic
2015-05-27 4:11 ` [U-Boot] [PATCH 5/5] warp: Fix the 'saveenv' command Fabio Estevam
2015-05-28 9:54 ` [U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE Stefano Babic
4 siblings, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2015-05-27 4:11 UTC (permalink / raw)
To: u-boot
From: Fabio Estevam <fabio.estevam@freescale.com>
Select the fuse command support.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
include/configs/warp.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/configs/warp.h b/include/configs/warp.h
index 5463c40..296ea83 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -98,6 +98,10 @@
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT 300
+/* Fuses */
+#define CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
--
1.9.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH 4/5] warp: Add fuse command support
2015-05-27 4:11 ` [U-Boot] [PATCH 4/5] warp: Add fuse command support Fabio Estevam
@ 2015-05-28 9:54 ` Stefano Babic
0 siblings, 0 replies; 10+ messages in thread
From: Stefano Babic @ 2015-05-28 9:54 UTC (permalink / raw)
To: u-boot
On 27/05/2015 06:11, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Select the fuse command support.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> include/configs/warp.h | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/include/configs/warp.h b/include/configs/warp.h
> index 5463c40..296ea83 100644
> --- a/include/configs/warp.h
> +++ b/include/configs/warp.h
> @@ -98,6 +98,10 @@
> #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
> #define DFU_DEFAULT_POLL_TIMEOUT 300
>
> +/* Fuses */
> +#define CONFIG_CMD_FUSE
> +#define CONFIG_MXC_OCOTP
> +
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "script=boot.scr\0" \
> "image=zImage\0" \
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH 5/5] warp: Fix the 'saveenv' command
2015-05-27 4:11 [U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE Fabio Estevam
` (2 preceding siblings ...)
2015-05-27 4:11 ` [U-Boot] [PATCH 4/5] warp: Add fuse command support Fabio Estevam
@ 2015-05-27 4:11 ` Fabio Estevam
2015-05-28 9:54 ` Stefano Babic
2015-05-28 9:54 ` [U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE Stefano Babic
4 siblings, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2015-05-27 4:11 UTC (permalink / raw)
To: u-boot
From: Fabio Estevam <fabio.estevam@freescale.com>
After the mx6 config consolidation, 'save' command is no longer
recognized.
Pass the full command name 'saveenv' instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
board/warp/README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/warp/README b/board/warp/README
index db3100e..22f9055 100644
--- a/board/warp/README
+++ b/board/warp/README
@@ -34,7 +34,7 @@ Then U-boot should start and its messages will appear in the console program.
Use the default environment variables:
=> env default -f -a
-=> save
+=> saveenv
Run the DFU command:
=> dfu 0 mmc 0
--
1.9.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH 5/5] warp: Fix the 'saveenv' command
2015-05-27 4:11 ` [U-Boot] [PATCH 5/5] warp: Fix the 'saveenv' command Fabio Estevam
@ 2015-05-28 9:54 ` Stefano Babic
0 siblings, 0 replies; 10+ messages in thread
From: Stefano Babic @ 2015-05-28 9:54 UTC (permalink / raw)
To: u-boot
On 27/05/2015 06:11, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> After the mx6 config consolidation, 'save' command is no longer
> recognized.
>
> Pass the full command name 'saveenv' instead.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> board/warp/README | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/warp/README b/board/warp/README
> index db3100e..22f9055 100644
> --- a/board/warp/README
> +++ b/board/warp/README
> @@ -34,7 +34,7 @@ Then U-boot should start and its messages will appear in the console program.
> Use the default environment variables:
>
> => env default -f -a
> -=> save
> +=> saveenv
>
> Run the DFU command:
> => dfu 0 mmc 0
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE
2015-05-27 4:11 [U-Boot] [PATCH 1/5] warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE Fabio Estevam
` (3 preceding siblings ...)
2015-05-27 4:11 ` [U-Boot] [PATCH 5/5] warp: Fix the 'saveenv' command Fabio Estevam
@ 2015-05-28 9:54 ` Stefano Babic
4 siblings, 0 replies; 10+ messages in thread
From: Stefano Babic @ 2015-05-28 9:54 UTC (permalink / raw)
To: u-boot
On 27/05/2015 06:11, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE in order to avoid the following error
> when running the dfu command:
> => dfu 0 mmc 0
> dfu_get_buf: Could not memalign 0x2000000 bytes
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> include/configs/warp.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/configs/warp.h b/include/configs/warp.h
> index 2673948..f0a912b 100644
> --- a/include/configs/warp.h
> +++ b/include/configs/warp.h
> @@ -94,7 +94,7 @@
> #define CONFIG_CMD_DFU
> #define CONFIG_DFU_FUNCTION
> #define CONFIG_DFU_MMC
> -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
> +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
> #define DFU_DEFAULT_POLL_TIMEOUT 300
>
> #define CONFIG_EXTRA_ENV_SETTINGS \
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 10+ messages in thread