From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Thu, 28 May 2015 09:00:49 -0700 Subject: [U-Boot] [PATCH 09/22][v2] armv8/ls2085a: Increase the supported kernel size In-Reply-To: <1432805055-1244-9-git-send-email-prabhakar@freescale.com> References: <1432805055-1244-1-git-send-email-prabhakar@freescale.com> <1432805055-1244-9-git-send-email-prabhakar@freescale.com> Message-ID: <55673BB1.4020804@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/28/2015 02:24 AM, Prabhakar Kushwaha wrote: > From: Bhupesh Sharma > > Increases the kernel size supported for LS2085A platforms:- > - Update environment variables > - Add ramdisk_size in bootargs env variable > - Define CONFIG_SYS_BOOTM_LEN to 64MB > > Signed-off-by: Bhupesh Sharma > Signed-off-by: Prabhakar Kushwaha > --- > Changes for v2: sending as it is for patch set > > include/configs/ls2085a_common.h | 9 ++++++--- > include/configs/ls2085aqds.h | 2 +- > include/configs/ls2085ardb.h | 2 +- > 3 files changed, 8 insertions(+), 5 deletions(-) > > diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h > index 749c58d..a33b8a9 100644 > --- a/include/configs/ls2085a_common.h > +++ b/include/configs/ls2085a_common.h > @@ -248,13 +248,13 @@ unsigned long long get_qixis_addr(void); > "initrd_high=0xffffffffffffffff\0" \ > "kernel_start=0x581200000\0" \ > "kernel_load=0xa0000000\0" \ > - "kernel_size=0x1000000\0" \ > + "kernel_size=0x2000000\0" \ > "console=ttyAMA0,38400n8\0" I didn't get a respond to my question for v1. How is kernel_size variable used? York