From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Hawley Date: Mon, 01 Jun 2015 14:21:20 -0700 Subject: [U-Boot] Building u-boot.rom for Minnowboard In-Reply-To: References: Message-ID: <556CCCD0.4080406@intel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Shouldn't be an appreciable differences in the boards, how are you flashing it? Can you punt me a copy of the image so I can try it here and double check? - John On 06/01/2015 01:10 PM, Simon Glass wrote: > +John > > Hi Saket, > > On 1 June 2015 at 13:45, Saket Sinha wrote: >> Hi Simon, >> >>>> >>>>>>>> 5. Now when I am powering Minnowmax and collecting the output on serial >>>>>>>> Nothing appears. >>>>>>>> >>> >>> It seems to boot OK for me. See details and download link below: >>> Download u-boot.rom from: >>> https://drive.google.com/file/d/0B7WYZbZ9zd-3eDFaNHpFN2JrcUE/view?usp=sharing >>> >> >> With this image also, I do not get any output on my serial port(though >> two blue leds D1 & D2 are lighted up) which I run by "screen >> /dev/ttyUSB0 115200" using USB to Serial TTL Level sent to me by John. >> >> When I flash MinnowBoard.MAX.X64.079.R01.bin instead of the >> u-boot.rom, I get all the UEFI outputs on the same setup. >> >> >>>>>> >>>>>> Can you confirm that you have setup the flashrom tool correctly? >>>> >>>> As of now I am trying to burn u-boot.rom with SPI programmer/software >>>> on Windows to check the sanity of my flashrom setup. >>>> >> >> I have tried flashing both the u-boot.rom and >> MinnowBoard.MAX.X64.079.R01.bin with the Dediprog Engineering software >> on Windows with exactly same results for both the cases as with >> flashrom so atleast flashrom setup is correct. > > Yes. I'm not sure what to do here sorry. That image works for me. Is > it possible that you have a different board variant to me? Is it the > dual core one? > > Regards, > Simon >