From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Hawley Date: Mon, 01 Jun 2015 14:58:59 -0700 Subject: [U-Boot] Building u-boot.rom for Minnowboard In-Reply-To: References: <556CCCD0.4080406@intel.com> Message-ID: <556CD5A3.5080205@intel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Are we assuming a serial port being 11520n8 on ttyS0 (I.E. the same port we normally use for early serial)? - John On 06/01/2015 02:27 PM, Simon Glass wrote: > Hi John, > > On Jun 1, 2015 3:21 PM, "John Hawley" > wrote: >> >> Shouldn't be an appreciable differences in the boards, how are you >> flashing it? Can you punt me a copy of the image so I can try it here >> and double check? >> >> - John > > Please see below for the drive link. > > - Simon > >> >> On 06/01/2015 01:10 PM, Simon Glass wrote: >> > +John >> > >> > Hi Saket, >> > >> > On 1 June 2015 at 13:45, Saket Sinha > wrote: >> >> Hi Simon, >> >> >> >>>> >> >>>>>>>> 5. Now when I am powering Minnowmax and collecting the output > on serial >> >>>>>>>> Nothing appears. >> >>>>>>>> >> >>> >> >>> It seems to boot OK for me. See details and download link below: >> >>> Download u-boot.rom from: >> >>> > https://drive.google.com/file/d/0B7WYZbZ9zd-3eDFaNHpFN2JrcUE/view?usp=sharing >> >>> >> >> >> >> With this image also, I do not get any output on my serial port(though >> >> two blue leds D1 & D2 are lighted up) which I run by "screen >> >> /dev/ttyUSB0 115200" using USB to Serial TTL Level sent to me by John. >> >> >> >> When I flash MinnowBoard.MAX.X64.079.R01.bin instead of the >> >> u-boot.rom, I get all the UEFI outputs on the same setup. >> >> >> >> >> >>>>>> >> >>>>>> Can you confirm that you have setup the flashrom tool correctly? >> >>>> >> >>>> As of now I am trying to burn u-boot.rom with SPI programmer/software >> >>>> on Windows to check the sanity of my flashrom setup. >> >>>> >> >> >> >> I have tried flashing both the u-boot.rom and >> >> MinnowBoard.MAX.X64.079.R01.bin with the Dediprog Engineering software >> >> on Windows with exactly same results for both the cases as with >> >> flashrom so atleast flashrom setup is correct. >> > >> > Yes. I'm not sure what to do here sorry. That image works for me. Is >> > it possible that you have a different board variant to me? Is it the >> > dual core one? >> > >> > Regards, >> > Simon >> > >