From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 00/11] Add GPIO driver for Freescale Vybrid platform
Date: Mon, 08 Jun 2015 08:47:18 +0200 [thread overview]
Message-ID: <55753A76.3000606@denx.de> (raw)
In-Reply-To: <1433164045-9987-1-git-send-email-bhuvanchandra.dv@toradex.com>
On 01/06/2015 15:07, Bhuvanchandra DV wrote:
> Changes since V2:
> Add defconfig and device tree files list to Toradex boards maintainer file.
> Invert the logic for enabling the DSPI support.
>
> Bhuvanchandra DV (9):
> dm: gpio: uclass: Add flag to control sequence numbering
> dm: gpio: vf610: Add GPIO driver support
> colibri_vf: Add pinmux entries for GPIOs
> colibri_vf: Enable GPIO support
> arm: vf610: Add clock support for DSPI
> arm: vf610: Add iomux support for DSPI
> vf610: dts: Add device tree support
> colibri-vf: Enable SPI support
> colibri_vf: Add separate defconfig for device tree support
>
> Sanchayan Maity (2):
> usb: ehci-vf: Add weak function for board specific initialisation
> colibri_vf: Enable board specific USB initialisation for USB pen gpio
>
> arch/arm/cpu/armv7/vf610/generic.c | 7 ++
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/vf-colibri.dtsi | 21 ++++
> arch/arm/dts/vf.dtsi | 100 +++++++++++++++
> arch/arm/dts/vf500-colibri.dts | 18 +++
> arch/arm/dts/vf610-colibri.dts | 18 +++
> arch/arm/imx-common/iomux-v3.c | 26 ++++
> arch/arm/include/asm/arch-vf610/clock.h | 1 +
> arch/arm/include/asm/arch-vf610/crm_regs.h | 4 +
> arch/arm/include/asm/arch-vf610/gpio.h | 29 +++++
> arch/arm/include/asm/arch-vf610/imx-regs.h | 5 +
> arch/arm/include/asm/arch-vf610/iomux-vf610.h | 59 +++++++++
> arch/arm/include/asm/imx-common/iomux-v3.h | 6 +
> board/toradex/colibri_vf/MAINTAINERS | 4 +
> board/toradex/colibri_vf/colibri_vf.c | 106 ++++++++++++++++
> configs/colibri_vf_defconfig | 1 +
> configs/colibri_vf_dtb_defconfig | 8 ++
> drivers/gpio/Kconfig | 7 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-uclass.c | 1 +
> drivers/gpio/vybrid_gpio.c | 169 ++++++++++++++++++++++++++
> drivers/usb/host/ehci-vf.c | 8 ++
> include/configs/colibri_vf.h | 12 ++
> 23 files changed, 614 insertions(+)
> create mode 100644 arch/arm/dts/vf-colibri.dtsi
> create mode 100644 arch/arm/dts/vf.dtsi
> create mode 100644 arch/arm/dts/vf500-colibri.dts
> create mode 100644 arch/arm/dts/vf610-colibri.dts
> create mode 100644 arch/arm/include/asm/arch-vf610/gpio.h
> create mode 100644 configs/colibri_vf_dtb_defconfig
> create mode 100644 drivers/gpio/vybrid_gpio.c
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
prev parent reply other threads:[~2015-06-08 6:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-01 13:07 [U-Boot] [PATCH V3 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 01/11] dm: gpio: uclass: Add flag to control sequence numbering Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 02/11] dm: gpio: vf610: Add GPIO driver support Bhuvanchandra DV
2015-06-08 6:46 ` Stefano Babic
2015-06-01 13:07 ` [U-Boot] [PATCH V3 03/11] colibri_vf: Add pinmux entries for GPIOs Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 04/11] colibri_vf: Enable GPIO support Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 05/11] arm: vf610: Add clock support for DSPI Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 06/11] arm: vf610: Add iomux " Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 07/11] vf610: dts: Add device tree support Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 08/11] colibri-vf: Enable SPI support Bhuvanchandra DV
2015-06-01 17:04 ` Stefan Agner
2015-06-01 13:07 ` [U-Boot] [PATCH V3 09/11] colibri_vf: Add separate defconfig for device tree support Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 10/11] usb: ehci-vf: Add weak function for board specific initialisation Bhuvanchandra DV
2015-06-01 13:07 ` [U-Boot] [PATCH V3 11/11] colibri_vf: Enable board specific USB initialisation for USB pen gpio Bhuvanchandra DV
2015-06-08 6:09 ` [U-Boot] [PATCH V3 00/11] Add GPIO driver for Freescale Vybrid platform Bhuvanchandra DV
2015-06-08 6:47 ` Stefano Babic [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55753A76.3000606@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox