From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] gpio: vybrid: Use proper parameter name for gpio offset
Date: Tue, 9 Jun 2015 20:07:03 +0530 [thread overview]
Message-ID: <5576FA0F.1020408@toradex.com> (raw)
In-Reply-To: <1433859884.10944.1.camel@ingics.com>
On 06/09/2015 07:54 PM, Axel Lin wrote:
> It's confusing to use gpio as gpio offset parameter so rename it to offset
> for better readability.
Agreed, but IMHO these offsets any way at the end are the gpio numbers
of individual gpio chip instances. e.g: gpio 2 of gpio chip 1 which is
gpio 34.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
> drivers/gpio/vybrid_gpio.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpio/vybrid_gpio.c b/drivers/gpio/vybrid_gpio.c
> index 6eaf0a9..14ba7e5 100644
> --- a/drivers/gpio/vybrid_gpio.c
> +++ b/drivers/gpio/vybrid_gpio.c
> @@ -21,54 +21,54 @@ struct vybrid_gpios {
> struct vybrid_gpio_regs *reg;
> };
>
> -static int vybrid_gpio_direction_input(struct udevice *dev, unsigned gpio)
> +static int vybrid_gpio_direction_input(struct udevice *dev, unsigned offset)
> {
> const struct vybrid_gpios *gpios = dev_get_priv(dev);
> + unsigned gpio = offset + (gpios->chip * VYBRID_GPIO_COUNT);
>
> - gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
> imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_IN);
>
> return 0;
> }
>
> -static int vybrid_gpio_direction_output(struct udevice *dev, unsigned gpio,
> +static int vybrid_gpio_direction_output(struct udevice *dev, unsigned offset,
> int value)
> {
> const struct vybrid_gpios *gpios = dev_get_priv(dev);
> + unsigned gpio = offset + (gpios->chip * VYBRID_GPIO_COUNT);
>
> - gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
> gpio_set_value(gpio, value);
> imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_OUT);
>
> return 0;
> }
>
> -static int vybrid_gpio_get_value(struct udevice *dev, unsigned gpio)
> +static int vybrid_gpio_get_value(struct udevice *dev, unsigned offset)
> {
> const struct vybrid_gpios *gpios = dev_get_priv(dev);
>
> - return ((readl(&gpios->reg->gpio_pdir) & (1 << gpio))) ? 1 : 0;
> + return ((readl(&gpios->reg->gpio_pdir) & (1 << offset))) ? 1 : 0;
> }
>
> -static int vybrid_gpio_set_value(struct udevice *dev, unsigned gpio,
> +static int vybrid_gpio_set_value(struct udevice *dev, unsigned offset,
> int value)
> {
> const struct vybrid_gpios *gpios = dev_get_priv(dev);
> +
> if (value)
> - writel((1 << gpio), &gpios->reg->gpio_psor);
> + writel((1 << offset), &gpios->reg->gpio_psor);
> else
> - writel((1 << gpio), &gpios->reg->gpio_pcor);
> + writel((1 << offset), &gpios->reg->gpio_pcor);
>
> return 0;
> }
>
> -static int vybrid_gpio_get_function(struct udevice *dev, unsigned gpio)
> +static int vybrid_gpio_get_function(struct udevice *dev, unsigned offset)
> {
> const struct vybrid_gpios *gpios = dev_get_priv(dev);
> + unsigned gpio = offset + (gpios->chip * VYBRID_GPIO_COUNT);
> u32 g_state = 0;
>
> - gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
> -
> imx_iomux_gpio_get_function(gpio, &g_state);
>
> if (((g_state & (0x07 << PAD_MUX_MODE_SHIFT)) >> PAD_MUX_MODE_SHIFT) > 0)
>
Best regards,
Bhuvan
next prev parent reply other threads:[~2015-06-09 14:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-09 14:24 [U-Boot] [PATCH] gpio: vybrid: Use proper parameter name for gpio offset Axel Lin
2015-06-09 14:37 ` Bhuvanchandra DV [this message]
2015-06-10 0:39 ` Axel Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5576FA0F.1020408@toradex.com \
--to=bhuvanchandra.dv@toradex.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox