From mboxrd@z Thu Jan  1 00:00:00 1970
From: Steve Rae <srae@broadcom.com>
Date: Tue, 16 Jun 2015 13:58:26 -0700
Subject: [U-Boot] [PATCH v2 3/4] usb: board_usb_init and
 board_usb_cleanup calls in the fastboot command
In-Reply-To: <1434131821-7641-3-git-send-email-contact@paulk.fr>
References: <1434131821-7641-1-git-send-email-contact@paulk.fr>
 <1434131821-7641-3-git-send-email-contact@paulk.fr>
Message-ID: <55808DF2.3050209@broadcom.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Paul,

On 15-06-12 10:57 AM, Paul Kocialkowski wrote:
> Each USB download function command calls board_usb_init before registering the
> USB gadget and board_usb_cleanup after de-registering it. On devices currently
> using fasboot, musb-new is usually initialized earlier, but some other boards
> might need the board_usb_init call to properly initialize musb-new.
>
> This requires adding an argument (the USB controller index) to the fastboot
> command, as it is currently done with other USB download gadget functions.
>
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
>   common/cmd_fastboot.c             | 31 +++++++++++++++++++++++++------
>   include/configs/ti_omap5_common.h |  2 +-
>   2 files changed, 26 insertions(+), 7 deletions(-)
>
> diff --git a/common/cmd_fastboot.c b/common/cmd_fastboot.c
> index d52ccfb..86fbddf 100644
> --- a/common/cmd_fastboot.c
> +++ b/common/cmd_fastboot.c
> @@ -10,11 +10,26 @@
>   #include <common.h>
>   #include <command.h>
>   #include <g_dnl.h>
> +#include <usb.h>
>
>   static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
>   {
> +	int controller_index;
> +	char *usb_controller;
>   	int ret;
>
> +	if (argc < 2)
> +		return CMD_RET_USAGE;
> +
> +	usb_controller = argv[1];

Not backwards compatible.... I would prefer to make it optional:
         if (argc < 2)
                 controller_index = 0;
         else {
                 usb_controller = argv[1];
                 controller_index = simple_strtoul(usb_controller, NULL, 0);
         }

> +	controller_index = simple_strtoul(usb_controller, NULL, 0);
> +
> +	ret = board_usb_init(controller_index, USB_INIT_DEVICE);
> +	if (ret) {
> +		error("USB init failed: %d", ret);
> +		return CMD_RET_FAILURE;
> +	}
> +
>   	g_dnl_clear_detach();
>   	ret = g_dnl_register("usb_dnl_fastboot");
>   	if (ret)
> @@ -23,9 +38,8 @@ static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
>   	if (!g_dnl_board_usb_cable_connected()) {
>   		puts("\rUSB cable not detected.\n" \
>   		     "Command exit.\n");
> -		g_dnl_unregister();
> -		g_dnl_clear_detach();
> -		return CMD_RET_FAILURE;
> +		ret = CMD_RET_FAILURE;
> +		goto exit;
>   	}
>
>   	while (1) {
> @@ -36,14 +50,19 @@ static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
>   		usb_gadget_handle_interrupts(0);
>   	}
>
> +	ret = CMD_RET_SUCCESS;
> +
> +exit:
>   	g_dnl_unregister();
>   	g_dnl_clear_detach();
> -	return CMD_RET_SUCCESS;
> +	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
> +
> +	return ret;
>   }
>
>   U_BOOT_CMD(
> -	fastboot,	1,	0,	do_fastboot,
> +	fastboot, 2, 1, do_fastboot,
>   	"use USB Fastboot protocol",
> -	"\n"
> +	"<USB_controller>\n"

make it optional:
	"[<USB_controller>]\n"

>   	"    - run as a fastboot usb device"
>   );
> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
> index 4faffef..4fd5669 100644
> --- a/include/configs/ti_omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -137,7 +137,7 @@
>   	"if test ${dofastboot} -eq 1; then " \
>   		"echo Boot fastboot requested, resetting dofastboot ...;" \
>   		"setenv dofastboot 0; saveenv;" \
> -		"echo Booting into fastboot ...; fastboot;" \
> +		"echo Booting into fastboot ...; fastboot 0;" \

then this isn't needed either....

>   	"fi;" \
>   	"run findfdt; " \
>   	"run mmcboot;" \
>

Thanks, Steve