From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexy Gallardo Segura Date: Fri, 26 Jun 2015 10:08:30 -0400 Subject: [U-Boot] Fwd: Re: sd card not working. In-Reply-To: <558D5B2F.3070402@uclv.cu> References: <558D5B2F.3070402@uclv.cu> Message-ID: <558D5CDE.9080309@uclv.cu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de hi Jaehoon Chung in the previous email I try to reduce search of error. This is the seriel output with enabled CONFIG_MMC_TRACE. U-Boot 2015.04-rc2 (Jun 26 2015 - 09:46:24) CPU: Exynos4412 at 1000MHz Model: Odroid based on Exynos4412 DRAM: 2 GiB Board PMIC init MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 CMD_SEND:0 ARG 0x00000000 MMC_RSP_NONE CMD_SEND:8 ARG 0x000001AA MMC_RSP_R1,5,6,7 0x000001AA CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0x00FF8000 CMD_SEND:55 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000120 CMD_SEND:41 ARG 0x40300000 MMC_RSP_R3,4 0xC0FF8000 CMD_SEND:2 ARG 0x00000000 MMC_RSP_R2 0x744A4553 0x44432020 0x1033005B 0x8700E100 DUMPING DATA 000 - 74 4A 45 53 004 - 44 43 20 20 008 - 10 33 00 5B 012 - 87 00 E1 00 CMD_SEND:3 ARG 0x00000000 MMC_RSP_R1,5,6,7 0xB3680520 CMD_SEND:9 ARG 0xB3680000 MMC_RSP_R2 0x400E0032 0x5B590000 0x3C1D7F80 0x0A400000 DUMPING DATA 000 - 40 0E 00 32 004 - 5B 59 00 00 008 - 3C 1D 7F 80 012 - 0A 40 00 00 CMD_SEND:13 ARG 0xB3680000 MMC_RSP_R1,5,6,7 0x00000700 CURR STATE:3 CMD_SEND:7 ARG 0xB3680000 MMC_RSP_R1,5,6,7 0x00000700 CMD_SEND:55 ARG 0xB3680000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:51 ARG 0x00000000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:6 ARG 0x80FFFFF1 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:55 ARG 0xB3680000 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:6 ARG 0x00000002 MMC_RSP_R1,5,6,7 0x00000920 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00000000 sdhci_transfer_data: Error detected in status(0x208002)! MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:17 ARG 0x00000000 sdhci_transfer_data: Error detected in status(0x208002)! MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:16 ARG 0x00000200 MMC_RSP_R1,5,6,7 0x00000900 CMD_SEND:18 ARG 0x00000A00 sdhci_transfer_data: Error detected in status(0x608000)! MMC_RSP_R1,5,6,7 0x00000900 Using default environment DFU alt info setting: done Net: No ethernet found. Hit any key to stop autoboot: 0 best regards Alexy On 06/26/2015 12:09 AM, Jaehoon Chung wrote: > Hi, Alexy. > > On 06/25/2015 09:56 PM, Alexy Gallardo Segura wrote: >> hi Jaehoon Chung >> >> I use the CONFIG_MMC_TRACE in the method >> static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, >> unsigned int start_addr) >> on file sdhci.c. > How did you use the CONFIG_MMC_TRACE? > If CONFIG_MMC_TRACE is enabled, it should be printed messages in mmc.c. > (Try to print all debug messages.) > Then we can check which command is error. I will try to reproduce this. > > Best Regards, > Jaehoon Chung > >> This is the output for debug of method. This output is using the CONFIG_MMC_TRACE for complete method : >> >> CPU: Exynos4412 at 1000MHz >> Model: Odroid based on Exynos4412 >> DRAM: 2 GiB >> Board PMIC init >> MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 >> mmc fail to send stop cmd >> Using default environment >> >> DFU alt info setting: done >> Net: No ethernet found. >> Hit any key to stop autoboot: 0 >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> mmc fail to send stop cmd >> ** ext4fs_devread read error - block >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> Failed to mount ext2 filesystem... >> ** Unrecognized filesystem type ** >> >> For the CONFIG_MMC_TRACE for the part of method where is throws the error the serial output is the next: >> >> CPU: Exynos4412 at 1000MHz >> Model: Odroid based on Exynos4412 >> DRAM: 2 GiB >> Board PMIC init >> MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 >> sdhci_transfer_data: Transfer data timeout >> sdhci_transfer_data: Transfer data timeout >> MMC init failed >> Using default environment >> >> DFU alt info setting: done >> Net: No ethernet found. >> Hit any key to stop autoboot: 0 >> sdhci_transfer_data: Transfer data timeout >> ** Bad device mmc 0 ** >> sdhci_transfer_data: Transfer data timeout >> ** Bad device mmc 0 ** >> sdhci_transfer_data: Transfer data timeout >> ** Bad device mmc 0 ** >> Odroid # >> >> best regards >> >> Alexy >> >> On 06/24/2015 09:41 PM, Jaehoon Chung wrote: >>> Hi, Alexy. >>> >>> On 06/25/2015 02:06 AM, Alexy Gallardo Segura wrote: >>>> Hello everyone >>>> >>>> I am currently working with the ODROID-x2 platform and the U-boot that was using the u-boot by default, but support for the USB driver does not work well. Then I started to use the version available at: >>>> >>>> https://github.com/LeMaker/u-boot >>>> >>>> The USB works well. Probe the network and SD_CARD memories but now is not working for me. I am using an SD 8Gb. >>>> >>>> Serious output is as follows: >>>> >>>> U-Boot 2015.04-rc2 (Jun 24 2015 - 10:24:52) >>>> >>>> CPU: Exynos4412 at 1000MHz >>>> Model: Odroid based on Exynos4412 >>>> DRAM: 2 GiB >>>> Board PMIC init >>>> MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 >>>> sdhci_transfer_data: Error detected in status(0x208002)! >>>> sdhci_transfer_data: Error detected in status(0x208002)! >>>> sdhci_transfer_data: Error detected in status(0x208000)! >>>> Using default environment >>> It seems that sd-card doesn't initialize completely. >>> -> "sdhci_transfer_data: Error detected in status(0x208000)!" >>> >>> You can enable the MMC debug configuration.(CONFIG_MMC_TRACE) >>> Could you share the log message after enable CONFIG_MMC_TRACE? >>> >>> Best Regards, >>> Jaehoon Chung >>> >>>> DFU alt info setting: done >>>> Net: No ethernet found. >>>> Hit any key to stop autoboot: 0 >>>> ** ext4fs_devread read error - block >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> ** ext4fs_devread read error - block >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> ** ext4fs_devread read error - block >>>> Failed to mount ext2 filesystem... >>>> ** Unrecognized filesystem type ** >>>> Odroid # >>>> >>>> if someone knows something and I can help. >>>> >>>> Regards >>>> >>>> Alexy >>>> _______________________________________________ >>>> U-Boot mailing list >>>> U-Boot at lists.denx.de >>>> http://lists.denx.de/mailman/listinfo/u-boot >>>> >>