* [U-Boot] [PATCH] siemens,am33x: adjust mtd partition
2015-07-01 9:04 [U-Boot] [PATCH] siemens,am33x: adjust mtd partition Samuel Egli
@ 2015-07-01 10:49 ` Meier, Roger
2015-07-01 11:13 ` Heiko Schocher denx
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Meier, Roger @ 2015-07-01 10:49 UTC (permalink / raw)
To: u-boot
Thanks Sam!
> -----Original Message-----
> From: Samuel Egli [mailto:samuel.egli at siemens.com]
> Sent: Mittwoch, 1. Juli 2015 11:05
> To: u-boot at lists.denx.de
> Cc: trini at konsulko.com; Egli, Samuel; Heiko Schocher; Meier, Roger
> Subject: [PATCH] siemens,am33x: adjust mtd partition
>
> Use one mtd partition for rootfs and configuration by
> means of ubi volumes and get rid of configuration partition.
> We can use partition layout for both 256MB and 512MB flash.
>
> Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Roger Meier <r.meier@siemens.com>
Reviewed-by: Roger Meier <r.meier@siemens.com>
^ permalink raw reply [flat|nested] 9+ messages in thread* [U-Boot] [PATCH] siemens,am33x: adjust mtd partition
2015-07-01 9:04 [U-Boot] [PATCH] siemens,am33x: adjust mtd partition Samuel Egli
2015-07-01 10:49 ` Meier, Roger
@ 2015-07-01 11:13 ` Heiko Schocher denx
2015-07-01 12:00 ` Egli, Samuel
2015-07-01 15:03 ` Tom Rini
2015-07-01 15:57 ` [U-Boot] [PATCH v2] " Samuel Egli
3 siblings, 1 reply; 9+ messages in thread
From: Heiko Schocher denx @ 2015-07-01 11:13 UTC (permalink / raw)
To: u-boot
Hallo Samuel,
Am 01.07.2015 um 11:04 schrieb Samuel Egli:
> Use one mtd partition for rootfs and configuration by
> means of ubi volumes and get rid of configuration partition.
> We can use partition layout for both 256MB and 512MB flash.
>
> Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Roger Meier <r.meier@siemens.com>
> ---
> include/configs/siemens-am33x-common.h | 33 ++++++++++++++++----------------
> 1 file changed, 16 insertions(+), 17 deletions(-)
only one nitpick ...
> diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
> index 120647f..eddb868 100644
> --- a/include/configs/siemens-am33x-common.h
> +++ b/include/configs/siemens-am33x-common.h
> @@ -486,7 +486,7 @@
>
> /*
> * Variant 2 partition layout
> - * chip-size = 256MiB
> + * chip-size = 256MiB or 512 MiB
> *| name | size | address area |
> *-------------------------------------------------------
> *| spl | 128.000 KiB | 0x 0..0x 1ffff |
> @@ -496,23 +496,23 @@
> *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
> *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
> *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
> - *| rootfs | 148.000 MiB | 0x 360000..0x 975ffff |
> - *| mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
> - *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
> + *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff |
> + *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff |
> + *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff |
> *-------------------------------------------------------
> */
>
> #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
> - "128k(spl)," \
> - "128k(spl.backup1)," \
> - "128k(spl.backup2)," \
> - "128k(spl.backup3)," \
> - "1920k(u-boot)," \
> - "512k(u-boot.env0)," \
> - "512k(u-boot.env1)," \
> - "148m(rootfs)," \
> - "512k(mtdoops)," \
> - "-(configuration)"
> + "128k(spl)," \
> + "128k(spl.backup1)," \
> + "128k(spl.backup2)," \
> + "128k(spl.backup3)," \
> + "1920k(u-boot)," \
> + "512k(u-boot.env0)," \
> + "512k(u-boot.env1)," \
> + "512k(mtdoops)," \
> + "-(rootfs)"
You name the partition "rootfs" .. but it contains not only the
rootfs, instead it contains now 2 or more UBI volumes ...
Maybe a rename it to "ubi" or "ubivolumes" or ... makes this clearer?
Beside of this, you can add my:
Acked-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
> +
>
> #define DFU_ALT_INFO_NAND_V2 \
> "spl part 0 1;" \
> @@ -522,8 +522,7 @@
> "u-boot part 0 5;" \
> "u-boot.env0 part 0 6;" \
> "u-boot.env1 part 0 7;" \
> - "rootfs partubi 0 8;" \
> - "configuration partubi 0 10"
> + "rootfs partubi 0 9" \
>
> #define CONFIG_ENV_SETTINGS_NAND_V2 \
> "nand_active_ubi_vol=rootfs_a\0" \
> @@ -540,7 +539,7 @@
> "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
> "fi;" \
> "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
> - "ubi.mtd=7,2048 ubi.mtd=9,2048;" \
> + "ubi.mtd=8,2048;" \
> "setenv bootargs ${bootargs} " \
> "root=${nand_root} noinitrd ${mtdparts} " \
> "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 9+ messages in thread* [U-Boot] [PATCH] siemens,am33x: adjust mtd partition
2015-07-01 11:13 ` Heiko Schocher denx
@ 2015-07-01 12:00 ` Egli, Samuel
0 siblings, 0 replies; 9+ messages in thread
From: Egli, Samuel @ 2015-07-01 12:00 UTC (permalink / raw)
To: u-boot
Hi Heiko,
>-----Original Message-----
>From: Heiko Schocher denx [mailto:hs at denx.de]
>Sent: Mittwoch, 1. Juli 2015 13:14
>To: Egli, Samuel
>Cc: u-boot at lists.denx.de; trini at konsulko.com; Meier, Roger
>Subject: Re: [PATCH] siemens,am33x: adjust mtd partition
>
>Hallo Samuel,
>
>Am 01.07.2015 um 11:04 schrieb Samuel Egli:
>> Use one mtd partition for rootfs and configuration by means of ubi
>> volumes and get rid of configuration partition.
>> We can use partition layout for both 256MB and 512MB flash.
>>
>> Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
>> Cc: Heiko Schocher <hs@denx.de>
>> Cc: Roger Meier <r.meier@siemens.com>
>> ---
>> include/configs/siemens-am33x-common.h | 33 ++++++++++++++++------
>----------
>> 1 file changed, 16 insertions(+), 17 deletions(-)
>
>only one nitpick ...
>
>> diff --git a/include/configs/siemens-am33x-common.h
>> b/include/configs/siemens-am33x-common.h
>> index 120647f..eddb868 100644
>> --- a/include/configs/siemens-am33x-common.h
>> +++ b/include/configs/siemens-am33x-common.h
>> @@ -486,7 +486,7 @@
>>
>> /*
>> * Variant 2 partition layout
>> - * chip-size = 256MiB
>> + * chip-size = 256MiB or 512 MiB
>> *| name | size | address area |
>> *-------------------------------------------------------
>> *| spl | 128.000 KiB | 0x 0..0x 1ffff |
>> @@ -496,23 +496,23 @@
>> *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
>> *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
>> *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
>> - *| rootfs | 148.000 MiB | 0x 360000..0x 975ffff |
>> - *| mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
>> - *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
>> + *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff |
>> + *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | *| (512)
>> + rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff |
>> *-------------------------------------------------------
>> */
>>
>> #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
>> - "128k(spl)," \
>> - "128k(spl.backup1)," \
>> - "128k(spl.backup2)," \
>> - "128k(spl.backup3)," \
>> - "1920k(u-boot)," \
>> - "512k(u-boot.env0)," \
>> - "512k(u-boot.env1)," \
>> - "148m(rootfs)," \
>> - "512k(mtdoops)," \
>> - "-(configuration)"
>> + "128k(spl)," \
>> + "128k(spl.backup1)," \
>> + "128k(spl.backup2)," \
>> + "128k(spl.backup3)," \
>> + "1920k(u-boot)," \
>> + "512k(u-boot.env0)," \
>> + "512k(u-boot.env1)," \
>> + "512k(mtdoops)," \
>> + "-(rootfs)"
>
>You name the partition "rootfs" .. but it contains not only the rootfs,
>instead it contains now 2 or more UBI volumes ...
>
Yes this is true.
>Maybe a rename it to "ubi" or "ubivolumes" or ... makes this clearer?
>Beside of this, you can add my:
I had a first draft with partition name "ubi" ;-). What made me switch
back too rootfs:
* Minimal changes in xml descriptions and scripts (not part of U-Boot)
* DFU handles partitions with name "rootfs" differently, i.e. performs an erase
for remaining blocks (although, I'm not sure if this is still true)
>
>Acked-by: Heiko Schocher <hs@denx.de>
>
>bye,
>Heiko
>> +
>>
>> #define DFU_ALT_INFO_NAND_V2 \
>> "spl part 0 1;" \
>> @@ -522,8 +522,7 @@
>> "u-boot part 0 5;" \
>> "u-boot.env0 part 0 6;" \
>> "u-boot.env1 part 0 7;" \
>> - "rootfs partubi 0 8;" \
>> - "configuration partubi 0 10"
>> + "rootfs partubi 0 9" \
>>
>> #define CONFIG_ENV_SETTINGS_NAND_V2 \
>> "nand_active_ubi_vol=rootfs_a\0" \
>> @@ -540,7 +539,7 @@
>> "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
>> "fi;" \
>> "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
>> - "ubi.mtd=7,2048 ubi.mtd=9,2048;" \
>> + "ubi.mtd=8,2048;" \
>> "setenv bootargs ${bootargs} " \
>> "root=${nand_root} noinitrd ${mtdparts} " \
>> "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
>>
>
>--
>DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Sam
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] siemens,am33x: adjust mtd partition
2015-07-01 9:04 [U-Boot] [PATCH] siemens,am33x: adjust mtd partition Samuel Egli
2015-07-01 10:49 ` Meier, Roger
2015-07-01 11:13 ` Heiko Schocher denx
@ 2015-07-01 15:03 ` Tom Rini
2015-07-01 15:57 ` [U-Boot] [PATCH v2] " Samuel Egli
3 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2015-07-01 15:03 UTC (permalink / raw)
To: u-boot
On Wed, Jul 01, 2015 at 11:04:38AM +0200, Samuel Egli wrote:
> Use one mtd partition for rootfs and configuration by
> means of ubi volumes and get rid of configuration partition.
> We can use partition layout for both 256MB and 512MB flash.
>
> Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Roger Meier <r.meier@siemens.com>
[snip]
> @@ -540,7 +539,7 @@
> "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
> "fi;" \
> "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
> - "ubi.mtd=7,2048 ubi.mtd=9,2048;" \
> + "ubi.mtd=8,2048;" \
The kernel also accepts partition names here instead of numbers making
this more future-proof.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150701/4983e3eb/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread* [U-Boot] [PATCH v2] siemens,am33x: adjust mtd partition
2015-07-01 9:04 [U-Boot] [PATCH] siemens,am33x: adjust mtd partition Samuel Egli
` (2 preceding siblings ...)
2015-07-01 15:03 ` Tom Rini
@ 2015-07-01 15:57 ` Samuel Egli
2015-07-01 19:37 ` Tom Rini
` (2 more replies)
3 siblings, 3 replies; 9+ messages in thread
From: Samuel Egli @ 2015-07-01 15:57 UTC (permalink / raw)
To: u-boot
Use one mtd partition for rootfs and configuration by
means of ubi volumes and get rid of configuration partition.
We can use partition layout for both 256MB and 512MB flash.
Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Roger Meier <r.meier@siemens.com>
---
Changes for v2:
- Use partition name instead of number
include/configs/siemens-am33x-common.h | 33 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 35427db..b0d9243 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -490,7 +490,7 @@
/*
* Variant 2 partition layout
- * chip-size = 256MiB
+ * chip-size = 256MiB or 512 MiB
*| name | size | address area |
*-------------------------------------------------------
*| spl | 128.000 KiB | 0x 0..0x 1ffff |
@@ -500,23 +500,23 @@
*| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
*| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
*| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
- *| rootfs | 148.000 MiB | 0x 360000..0x 975ffff |
- *| mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
- *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
+ *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff |
+ *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff |
+ *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff |
*-------------------------------------------------------
*/
#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
- "128k(spl)," \
- "128k(spl.backup1)," \
- "128k(spl.backup2)," \
- "128k(spl.backup3)," \
- "1920k(u-boot)," \
- "512k(u-boot.env0)," \
- "512k(u-boot.env1)," \
- "148m(rootfs)," \
- "512k(mtdoops)," \
- "-(configuration)"
+ "128k(spl)," \
+ "128k(spl.backup1)," \
+ "128k(spl.backup2)," \
+ "128k(spl.backup3)," \
+ "1920k(u-boot)," \
+ "512k(u-boot.env0)," \
+ "512k(u-boot.env1)," \
+ "512k(mtdoops)," \
+ "-(rootfs)"
+
#define DFU_ALT_INFO_NAND_V2 \
"spl part 0 1;" \
@@ -526,8 +526,7 @@
"u-boot part 0 5;" \
"u-boot.env0 part 0 6;" \
"u-boot.env1 part 0 7;" \
- "rootfs partubi 0 8;" \
- "configuration partubi 0 10"
+ "rootfs partubi 0 9" \
#define CONFIG_ENV_SETTINGS_NAND_V2 \
"nand_active_ubi_vol=rootfs_a\0" \
@@ -544,7 +543,7 @@
"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
"fi;" \
"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
- "ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+ "ubi.mtd=rootfs,2048;" \
"setenv bootargs ${bootargs} " \
"root=${nand_root} noinitrd ${mtdparts} " \
"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
--
1.7.10.4
^ permalink raw reply related [flat|nested] 9+ messages in thread* [U-Boot] [PATCH v2] siemens,am33x: adjust mtd partition
2015-07-01 15:57 ` [U-Boot] [PATCH v2] " Samuel Egli
@ 2015-07-01 19:37 ` Tom Rini
2015-07-02 4:28 ` Heiko Schocher denx
2015-07-10 12:57 ` [U-Boot] [U-Boot,v2] " Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2015-07-01 19:37 UTC (permalink / raw)
To: u-boot
On Wed, Jul 01, 2015 at 05:57:39PM +0200, Samuel Egli wrote:
> Use one mtd partition for rootfs and configuration by
> means of ubi volumes and get rid of configuration partition.
> We can use partition layout for both 256MB and 512MB flash.
>
> Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Roger Meier <r.meier@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150701/55246f8a/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2] siemens,am33x: adjust mtd partition
2015-07-01 15:57 ` [U-Boot] [PATCH v2] " Samuel Egli
2015-07-01 19:37 ` Tom Rini
@ 2015-07-02 4:28 ` Heiko Schocher denx
2015-07-10 12:57 ` [U-Boot] [U-Boot,v2] " Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Heiko Schocher denx @ 2015-07-02 4:28 UTC (permalink / raw)
To: u-boot
Hello Samuel,
Am 01.07.2015 um 17:57 schrieb Samuel Egli:
> Use one mtd partition for rootfs and configuration by
> means of ubi volumes and get rid of configuration partition.
> We can use partition layout for both 256MB and 512MB flash.
>
> Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Roger Meier <r.meier@siemens.com>
> ---
> Changes for v2:
> - Use partition name instead of number
>
> include/configs/siemens-am33x-common.h | 33 ++++++++++++++++----------------
> 1 file changed, 16 insertions(+), 17 deletions(-)
Acked-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
>
> diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
> index 35427db..b0d9243 100644
> --- a/include/configs/siemens-am33x-common.h
> +++ b/include/configs/siemens-am33x-common.h
> @@ -490,7 +490,7 @@
>
> /*
> * Variant 2 partition layout
> - * chip-size = 256MiB
> + * chip-size = 256MiB or 512 MiB
> *| name | size | address area |
> *-------------------------------------------------------
> *| spl | 128.000 KiB | 0x 0..0x 1ffff |
> @@ -500,23 +500,23 @@
> *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
> *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
> *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
> - *| rootfs | 148.000 MiB | 0x 360000..0x 975ffff |
> - *| mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
> - *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
> + *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff |
> + *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff |
> + *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff |
> *-------------------------------------------------------
> */
>
> #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
> - "128k(spl)," \
> - "128k(spl.backup1)," \
> - "128k(spl.backup2)," \
> - "128k(spl.backup3)," \
> - "1920k(u-boot)," \
> - "512k(u-boot.env0)," \
> - "512k(u-boot.env1)," \
> - "148m(rootfs)," \
> - "512k(mtdoops)," \
> - "-(configuration)"
> + "128k(spl)," \
> + "128k(spl.backup1)," \
> + "128k(spl.backup2)," \
> + "128k(spl.backup3)," \
> + "1920k(u-boot)," \
> + "512k(u-boot.env0)," \
> + "512k(u-boot.env1)," \
> + "512k(mtdoops)," \
> + "-(rootfs)"
> +
>
> #define DFU_ALT_INFO_NAND_V2 \
> "spl part 0 1;" \
> @@ -526,8 +526,7 @@
> "u-boot part 0 5;" \
> "u-boot.env0 part 0 6;" \
> "u-boot.env1 part 0 7;" \
> - "rootfs partubi 0 8;" \
> - "configuration partubi 0 10"
> + "rootfs partubi 0 9" \
>
> #define CONFIG_ENV_SETTINGS_NAND_V2 \
> "nand_active_ubi_vol=rootfs_a\0" \
> @@ -544,7 +543,7 @@
> "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
> "fi;" \
> "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
> - "ubi.mtd=7,2048 ubi.mtd=9,2048;" \
> + "ubi.mtd=rootfs,2048;" \
> "setenv bootargs ${bootargs} " \
> "root=${nand_root} noinitrd ${mtdparts} " \
> "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
> --
> 1.7.10.4
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 9+ messages in thread* [U-Boot] [U-Boot,v2] siemens,am33x: adjust mtd partition
2015-07-01 15:57 ` [U-Boot] [PATCH v2] " Samuel Egli
2015-07-01 19:37 ` Tom Rini
2015-07-02 4:28 ` Heiko Schocher denx
@ 2015-07-10 12:57 ` Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2015-07-10 12:57 UTC (permalink / raw)
To: u-boot
On Wed, Jul 01, 2015 at 05:57:39PM +0200, Egli, Samuel wrote:
> Use one mtd partition for rootfs and configuration by
> means of ubi volumes and get rid of configuration partition.
> We can use partition layout for both 256MB and 512MB flash.
>
> Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Roger Meier <r.meier@siemens.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Acked-by: Heiko Schocher <hs@denx.de>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150710/45e8cf35/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread