[U-Boot] [PATCH 10/55] exynos: i2c: Tidy up the driver model code

[Heiko Schocher <hs@denx.de>]

Hello Simon,

Am 03.07.2015 um 02:15 schrieb Simon Glass:
> The existing driver model implementation uses the old non-driver-model code
> to operate, but has become impossibly tangled as a result. The actual
> algorithm is quite simple.
>
> Also the normal-speed and high-speed buses are quite different and it
> doesn't seem that useful to put them in the same driver.
>
> Finally, there is a bug which breaks communication with the Maxim sound
> codec and may cause problems with other device.
>
> Rewrite the driver model code for normal-speed operation so that it is
> easier to understand, and fix the bug. Add a TODO to split the drivers.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
>   drivers/i2c/s3c24x0_i2c.c | 139 ++++++++++++++++++++++++++++++++++------------
>   1 file changed, 103 insertions(+), 36 deletions(-)

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
> index 4bbd012..c11a6be 100644
> --- a/drivers/i2c/s3c24x0_i2c.c
> +++ b/drivers/i2c/s3c24x0_i2c.c
> @@ -1284,62 +1284,106 @@ U_BOOT_I2C_ADAP_COMPLETE(s3c0, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>   #endif /* CONFIG_SYS_I2C */
>
>   #ifdef CONFIG_DM_I2C
> -static int i2c_write_data(struct s3c24x0_i2c_bus *i2c_bus, uchar chip,
> -			  uchar *buffer, int len, bool end_with_repeated_start)
> +static int exynos_hs_i2c_xfer(struct udevice *dev, struct i2c_msg *msg,
> +			      int nmsgs)
>   {
> +	struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
> +	struct exynos5_hsi2c *hsregs = i2c_bus->hsregs;
>   	int ret;
>
> -	if (i2c_bus->is_highspeed) {
> -		ret = hsi2c_write(i2c_bus->hsregs, chip, 0, 0,
> -				  buffer, len, true);
> -		if (ret)
> +	for (; nmsgs > 0; nmsgs--, msg++) {
> +		if (msg->flags & I2C_M_RD) {
> +			ret = hsi2c_read(hsregs, msg->addr, 0, 0, msg->buf,
> +					 msg->len);
> +		} else {
> +			ret = hsi2c_write(hsregs, msg->addr, 0, 0, msg->buf,
> +					  msg->len, true);
> +		}
> +		if (ret) {
>   			exynos5_i2c_reset(i2c_bus);
> -	} else {
> -		ret = i2c_transfer(i2c_bus->regs, I2C_WRITE,
> -				   chip << 1, 0, 0, buffer, len);
> +			return -EREMOTEIO;
> +		}
>   	}
>
> -	return ret != I2C_OK;
> +	return 0;
>   }
>
> -static int i2c_read_data(struct s3c24x0_i2c_bus  *i2c_bus, uchar chip,
> -			 uchar *buffer, int len)
> +static int s3c24x0_do_msg(struct s3c24x0_i2c_bus *i2c_bus, struct i2c_msg *msg,
> +			  int seq)
>   {
> -	int ret;
> +	struct s3c24x0_i2c *i2c = i2c_bus->regs;
> +	bool is_read = msg->flags & I2C_M_RD;
> +	uint status;
> +	uint addr;
> +	int ret, i;
>
> -	if (i2c_bus->is_highspeed) {
> -		ret = hsi2c_read(i2c_bus->hsregs, chip, 0, 0, buffer, len);
> -		if (ret)
> -			exynos5_i2c_reset(i2c_bus);
> +	if (!seq)
> +		setbits_le32(&i2c->iiccon, I2CCON_ACKGEN);
> +
> +	/* Get the slave chip address going */
> +	addr = msg->addr << 1;
> +	writel(addr, &i2c->iicds);
> +	status = I2C_TXRX_ENA | I2C_START_STOP;
> +	if (is_read)
> +		status |= I2C_MODE_MR;
> +	else
> +		status |= I2C_MODE_MT;
> +	writel(status, &i2c->iicstat);
> +	if (seq)
> +		read_write_byte(i2c);
> +
> +	/* Wait for chip address to transmit */
> +	ret = WaitForXfer(i2c);
> +	if (ret)
> +		goto err;
> +
> +	if (is_read) {
> +		for (i = 0; !ret && i < msg->len; i++) {
> +			/* disable ACK for final READ */
> +			if (i == msg->len - 1)
> +				clrbits_le32(&i2c->iiccon, I2CCON_ACKGEN);
> +			read_write_byte(i2c);
> +			ret = WaitForXfer(i2c);
> +			msg->buf[i] = readl(&i2c->iicds);
> +		}
> +		if (ret == I2C_NACK)
> +			ret = I2C_OK; /* Normal terminated read */
>   	} else {
> -		ret = i2c_transfer(i2c_bus->regs, I2C_READ,
> -				   chip << 1, 0, 0, buffer, len);
> +		for (i = 0; !ret && i < msg->len; i++) {
> +			writel(msg->buf[i], &i2c->iicds);
> +			read_write_byte(i2c);
> +			ret = WaitForXfer(i2c);
> +		}
>   	}
>
> -	return ret != I2C_OK;
> +err:
> +	return ret;
>   }
>
>   static int s3c24x0_i2c_xfer(struct udevice *dev, struct i2c_msg *msg,
>   			    int nmsgs)
>   {
>   	struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
> -	int ret;
> +	struct s3c24x0_i2c *i2c = i2c_bus->regs;
> +	ulong start_time;
> +	int ret, i;
>
> -	for (; nmsgs > 0; nmsgs--, msg++) {
> -		bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
> -
> -		if (msg->flags & I2C_M_RD) {
> -			ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
> -					    msg->len);
> -		} else {
> -			ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
> -					     msg->len, next_is_read);
> +	start_time = get_timer(0);
> +	while (readl(&i2c->iicstat) & I2CSTAT_BSY) {
> +		if (get_timer(start_time) > I2C_TIMEOUT_MS) {
> +			debug("Timeout\n");
> +			return -ETIMEDOUT;
>   		}
> -		if (ret)
> -			return -EREMOTEIO;
>   	}
>
> -	return 0;
> +	for (ret = 0, i = 0; !ret && i < nmsgs; i++)
> +		ret = s3c24x0_do_msg(i2c_bus, &msg[i], i);
> +
> +	/* Send STOP */
> +	writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
> +	read_write_byte(i2c);
> +
> +	return ret ? -EREMOTEIO : 0;
>   }
>
>   static int s3c_i2c_ofdata_to_platdata(struct udevice *dev)
> @@ -1364,8 +1408,7 @@ static int s3c_i2c_ofdata_to_platdata(struct udevice *dev)
>   	i2c_bus->id = pinmux_decode_periph_id(blob, node);
>
>   	i2c_bus->clock_frequency = fdtdec_get_int(blob, node,
> -						"clock-frequency",
> -						CONFIG_SYS_I2C_S3C24X0_SPEED);
> +						  "clock-frequency", 100000);
>   	i2c_bus->node = node;
>   	i2c_bus->bus_num = dev->seq;
>
> @@ -1384,7 +1427,6 @@ static const struct dm_i2c_ops s3c_i2c_ops = {
>
>   static const struct udevice_id s3c_i2c_ids[] = {
>   	{ .compatible = "samsung,s3c2440-i2c", .data = EXYNOS_I2C_STD },
> -	{ .compatible = "samsung,exynos5-hsi2c", .data = EXYNOS_I2C_HS },
>   	{ }
>   };
>
> @@ -1397,4 +1439,29 @@ U_BOOT_DRIVER(i2c_s3c) = {
>   	.priv_auto_alloc_size = sizeof(struct s3c24x0_i2c_bus),
>   	.ops	= &s3c_i2c_ops,
>   };
> +
> +/*
> + * TODO(sjg at chromium.org): Move this to a separate file when everything uses
> + * driver model
> + */
> +static const struct dm_i2c_ops exynos_hs_i2c_ops = {
> +	.xfer		= exynos_hs_i2c_xfer,
> +	.probe_chip	= s3c24x0_i2c_probe,
> +	.set_bus_speed	= s3c24x0_i2c_set_bus_speed,
> +};
> +
> +static const struct udevice_id exynos_hs_i2c_ids[] = {
> +	{ .compatible = "samsung,exynos5-hsi2c", .data = EXYNOS_I2C_HS },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(hs_i2c) = {
> +	.name	= "i2c_s3c_hs",
> +	.id	= UCLASS_I2C,
> +	.of_match = exynos_hs_i2c_ids,
> +	.ofdata_to_platdata = s3c_i2c_ofdata_to_platdata,
> +	.per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
> +	.priv_auto_alloc_size = sizeof(struct s3c24x0_i2c_bus),
> +	.ops	= &exynos_hs_i2c_ops,
> +};
>   #endif /* CONFIG_DM_I2C */
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany