[U-Boot] [PATCH] mx53loco: Use generic 'load' command instead of 'fatload'

[Guillaume Gardet <guillaume.gardet@free.fr>]

Le 16/06/2015 13:51, Liu Jason a ?crit :
>> -----Original Message-----
>> From: Guillaume GARDET [mailto:guillaume.gardet at free.fr]
>> Sent: Tuesday, June 16, 2015 5:49 PM
>> To: u-boot at lists.denx.de
>> Cc: Guillaume GARDET; Liu Hui-R64343; Stefano Babic
>> Subject: [U-Boot] [PATCH] mx53loco: Use generic 'load' command instead of
>> 'fatload'
>>
>> This patch uses generic 'load' command instead of 'fatload' for
>> 'loadbootscript', 'loadimage' and 'loadfdt' for mx53loco board.
>>
>> This allows to use EXT partition instead of FAT, while keeping FAT
>> compatibility.
>>
>> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
>>
>> Cc: Jason Liu <r64343@freescale.com>
>> Cc: Stefano Babic <sbabic@denx.de>
> Acked-by: Jason Liu <r64343@freescale.com>

Stefano, could you merge it, please? It would be nice to get it in 2015.07 release.


Guillaume

>
>> ---
>>   include/configs/mx53loco.h | 7 ++++---
>>   1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
>> index db551a9..b3ac5e2 100644
>> --- a/include/configs/mx53loco.h
>> +++ b/include/configs/mx53loco.h
>> @@ -43,6 +43,7 @@
>>   #define CONFIG_MMC
>>   #define CONFIG_CMD_MMC
>>   #define CONFIG_GENERIC_MMC
>> +#define CONFIG_CMD_FS_GENERIC
>>   #define CONFIG_CMD_FAT
>>   #define CONFIG_CMD_EXT2
>>   #define CONFIG_DOS_PARTITION
>> @@ -116,11 +117,11 @@
>>   	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
>>   	"mmcargs=setenv bootargs console=ttymxc0,${baudrate}
>> root=${mmcroot}\0" \
>>   	"loadbootscript=" \
>> -		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
>> +		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
>>   	"bootscript=echo Running bootscript from mmc ...; " \
>>   		"source\0" \
>> -	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0"
>> \
>> -	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr}
>> ${fdt_file}\0" \
>> +	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
>> +	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
>>   	"mmcboot=echo Booting from mmc ...; " \
>>   		"run mmcargs; " \
>>   		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then "
>> \
>> --
>> 1.8.4.5
>