From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guillaume Gardet Date: Mon, 06 Jul 2015 12:10:20 +0200 Subject: [U-Boot] [PATCH] mx53loco: Use generic 'load' command instead of 'fatload' In-Reply-To: References: <1434448128-16004-1-git-send-email-guillaume.gardet@free.fr> Message-ID: <559A540C.5060309@free.fr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Le 16/06/2015 13:51, Liu Jason a ?crit : >> -----Original Message----- >> From: Guillaume GARDET [mailto:guillaume.gardet at free.fr] >> Sent: Tuesday, June 16, 2015 5:49 PM >> To: u-boot at lists.denx.de >> Cc: Guillaume GARDET; Liu Hui-R64343; Stefano Babic >> Subject: [U-Boot] [PATCH] mx53loco: Use generic 'load' command instead of >> 'fatload' >> >> This patch uses generic 'load' command instead of 'fatload' for >> 'loadbootscript', 'loadimage' and 'loadfdt' for mx53loco board. >> >> This allows to use EXT partition instead of FAT, while keeping FAT >> compatibility. >> >> Signed-off-by: Guillaume GARDET >> >> Cc: Jason Liu >> Cc: Stefano Babic > Acked-by: Jason Liu Stefano, could you merge it, please? It would be nice to get it in 2015.07 release. Guillaume > >> --- >> include/configs/mx53loco.h | 7 ++++--- >> 1 file changed, 4 insertions(+), 3 deletions(-) >> >> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h >> index db551a9..b3ac5e2 100644 >> --- a/include/configs/mx53loco.h >> +++ b/include/configs/mx53loco.h >> @@ -43,6 +43,7 @@ >> #define CONFIG_MMC >> #define CONFIG_CMD_MMC >> #define CONFIG_GENERIC_MMC >> +#define CONFIG_CMD_FS_GENERIC >> #define CONFIG_CMD_FAT >> #define CONFIG_CMD_EXT2 >> #define CONFIG_DOS_PARTITION >> @@ -116,11 +117,11 @@ >> "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ >> "mmcargs=setenv bootargs console=ttymxc0,${baudrate} >> root=${mmcroot}\0" \ >> "loadbootscript=" \ >> - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ >> + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ >> "bootscript=echo Running bootscript from mmc ...; " \ >> "source\0" \ >> - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" >> \ >> - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} >> ${fdt_file}\0" \ >> + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ >> + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ >> "mmcboot=echo Booting from mmc ...; " \ >> "run mmcargs; " \ >> "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " >> \ >> -- >> 1.8.4.5 >