* [U-Boot] [PATCH 1/4] g_dnl: add missing declaration
2015-07-06 16:52 [U-Boot] [PATCH 0/4] This series implements fastboot on the "bcm28155_ap" boards Steve Rae
@ 2015-07-06 16:52 ` Steve Rae
2015-07-06 16:52 ` [U-Boot] [PATCH 2/4] usb: s3c-otg: support 8-bit interface Steve Rae
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Steve Rae @ 2015-07-06 16:52 UTC (permalink / raw)
To: u-boot
Signed-off-by: Steve Rae <srae@broadcom.com>
---
include/g_dnl.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/g_dnl.h b/include/g_dnl.h
index 4eeb5e4..ba49f1f 100644
--- a/include/g_dnl.h
+++ b/include/g_dnl.h
@@ -34,6 +34,7 @@ struct g_dnl_bind_callback {
};
int g_dnl_bind_fixup(struct usb_device_descriptor *, const char *);
+int g_dnl_get_board_bcd_device_number(int gcnum);
int g_dnl_board_usb_cable_connected(void);
int g_dnl_register(const char *s);
void g_dnl_unregister(void);
--
1.8.5
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 2/4] usb: s3c-otg: support 8-bit interface
2015-07-06 16:52 [U-Boot] [PATCH 0/4] This series implements fastboot on the "bcm28155_ap" boards Steve Rae
2015-07-06 16:52 ` [U-Boot] [PATCH 1/4] g_dnl: add missing declaration Steve Rae
@ 2015-07-06 16:52 ` Steve Rae
2015-07-06 16:52 ` [U-Boot] [PATCH 3/4] usb: gadget: bcm_udc_otg files Steve Rae
2015-07-06 16:52 ` [U-Boot] [PATCH 4/4] implement Fastboot via USB OTG on bcm28155_ap boards Steve Rae
3 siblings, 0 replies; 7+ messages in thread
From: Steve Rae @ 2015-07-06 16:52 UTC (permalink / raw)
To: u-boot
Signed-off-by: Steve Rae <srae@broadcom.com>
---
drivers/usb/gadget/s3c_udc_otg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index 7a2d1e7..2e3b4f7 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -414,7 +414,11 @@ static void reconfig_usbd(struct s3c_udc *dev)
|0<<7 /* Ulpi DDR sel*/
|0<<6 /* 0: high speed utmi+, 1: full speed serial*/
|0<<4 /* 0: utmi+, 1:ulpi*/
+#ifdef CONFIG_USB_GADGET_PHY_8_BIT
+ |0<<3 /* phy i/f 0:8bit, 1:16bit*/
+#else
|1<<3 /* phy i/f 0:8bit, 1:16bit*/
+#endif
|0x7<<0; /* HS/FS Timeout**/
if (dev->pdata->usb_gusbcfg)
--
1.8.5
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 3/4] usb: gadget: bcm_udc_otg files
2015-07-06 16:52 [U-Boot] [PATCH 0/4] This series implements fastboot on the "bcm28155_ap" boards Steve Rae
2015-07-06 16:52 ` [U-Boot] [PATCH 1/4] g_dnl: add missing declaration Steve Rae
2015-07-06 16:52 ` [U-Boot] [PATCH 2/4] usb: s3c-otg: support 8-bit interface Steve Rae
@ 2015-07-06 16:52 ` Steve Rae
2015-07-06 16:52 ` [U-Boot] [PATCH 4/4] implement Fastboot via USB OTG on bcm28155_ap boards Steve Rae
3 siblings, 0 replies; 7+ messages in thread
From: Steve Rae @ 2015-07-06 16:52 UTC (permalink / raw)
To: u-boot
From: "JD (Jiandong) Zheng" <jdzheng@broadcom.com>
Add the required files for the Broadcom UDC OTG interface.
Signed-off-by: Steve Rae <srae@broadcom.com>
---
arch/arm/include/asm/arch-bcm281xx/sysmap.h | 7 ++++
drivers/usb/gadget/bcm_udc_otg.h | 17 ++++++++++
drivers/usb/gadget/bcm_udc_otg_phy.c | 50 +++++++++++++++++++++++++++++
3 files changed, 74 insertions(+)
create mode 100644 drivers/usb/gadget/bcm_udc_otg.h
create mode 100644 drivers/usb/gadget/bcm_udc_otg_phy.c
diff --git a/arch/arm/include/asm/arch-bcm281xx/sysmap.h b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
index 93ebf34..dbcc88c 100644
--- a/arch/arm/include/asm/arch-bcm281xx/sysmap.h
+++ b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
@@ -27,4 +27,11 @@
#define SECWD2_BASE_ADDR 0x35002f40
#define TIMER_BASE_ADDR 0x3e00d000
+#define HSOTG_DCTL_OFFSET 0x00000804
+#define HSOTG_DCTL_SFTDISCON_MASK 0x00000002
+
+#define HSOTG_CTRL_PHY_P1CTL_OFFSET 0x00000008
+#define HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK 0x00000002
+#define HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK 0x00000001
+
#endif
diff --git a/drivers/usb/gadget/bcm_udc_otg.h b/drivers/usb/gadget/bcm_udc_otg.h
new file mode 100644
index 0000000..81a1fc0
--- /dev/null
+++ b/drivers/usb/gadget/bcm_udc_otg.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2015 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __BCM_UDC_OTG_H
+#define __BCM_UDC_OTG_H
+
+#include <linux/types.h>
+
+#define wfld_set(addr, fld_val, fld_mask) \
+ (writel(((readl(addr) & ~(fld_mask)) | (fld_val)), (addr)))
+#define wfld_clear(addr, fld_mask) \
+ (writel((readl(addr) & ~(fld_mask)), (addr)))
+
+#endif
diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c b/drivers/usb/gadget/bcm_udc_otg_phy.c
new file mode 100644
index 0000000..1aa9f91
--- /dev/null
+++ b/drivers/usb/gadget/bcm_udc_otg_phy.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sysmap.h>
+
+#include <usb/s3c_udc.h>
+#include "bcm_udc_otg.h"
+
+void otg_phy_init(struct s3c_udc *dev)
+{
+ /* set Phy to driving mode */
+ wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
+ HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK);
+
+ udelay(100);
+
+ /* clear Soft Disconnect */
+ wfld_clear(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET,
+ HSOTG_DCTL_SFTDISCON_MASK);
+
+ /* invoke Reset (active low) */
+ wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
+ HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK);
+
+ udelay(10000);
+
+ /* release Reset */
+ wfld_set(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
+ HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK,
+ HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK);
+}
+
+void otg_phy_off(struct s3c_udc *dev)
+{
+ /* Soft Disconnect */
+ wfld_set(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET,
+ HSOTG_DCTL_SFTDISCON_MASK,
+ HSOTG_DCTL_SFTDISCON_MASK);
+
+ /* set Phy to non-driving (reset) mode */
+ wfld_set(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
+ HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK,
+ HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK);
+}
--
1.8.5
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 4/4] implement Fastboot via USB OTG on bcm28155_ap boards
2015-07-06 16:52 [U-Boot] [PATCH 0/4] This series implements fastboot on the "bcm28155_ap" boards Steve Rae
` (2 preceding siblings ...)
2015-07-06 16:52 ` [U-Boot] [PATCH 3/4] usb: gadget: bcm_udc_otg files Steve Rae
@ 2015-07-06 16:52 ` Steve Rae
2015-07-06 18:22 ` Paul Kocialkowski
3 siblings, 1 reply; 7+ messages in thread
From: Steve Rae @ 2015-07-06 16:52 UTC (permalink / raw)
To: u-boot
From: "JD (Jiandong) Zheng" <jdzheng@broadcom.com>
Signed-off-by: Steve Rae <srae@broadcom.com>
---
board/broadcom/bcm28155_ap/bcm28155_ap.c | 40 ++++++++++++++++++++++++++++++++
drivers/usb/gadget/Makefile | 1 +
include/configs/bcm28155_ap.h | 20 ++++++++++++++++
3 files changed, 61 insertions(+)
diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c
index 940a1c2..20eb191 100644
--- a/board/broadcom/bcm28155_ap/bcm28155_ap.c
+++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c
@@ -12,12 +12,20 @@
#include <asm/kona-common/clk.h>
#include <asm/arch/sysmap.h>
+#include <usb.h>
+#include <usb/s3c_udc.h>
+#include <g_dnl.h>
+
#define SECWATCHDOG_SDOGCR_OFFSET 0x00000000
#define SECWATCHDOG_SDOGCR_EN_SHIFT 27
#define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT 26
#define SECWATCHDOG_SDOGCR_CLKS_SHIFT 20
#define SECWATCHDOG_SDOGCR_LD_SHIFT 0
+#ifndef CONFIG_USB_SERIALNO
+#define CONFIG_USB_SERIALNO "1234567890"
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
/*
@@ -85,3 +93,35 @@ int board_mmc_init(bd_t *bis)
return ret;
}
#endif
+
+#ifdef CONFIG_USB_GADGET
+static struct s3c_plat_otg_data bcm_otg_data = {
+ .regs_otg = HSOTG_BASE_ADDR
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ debug("%s: performing s3c_udc_probe\n", __func__);
+ return s3c_udc_probe(&bcm_otg_data);
+}
+
+int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
+{
+ debug("%s\n", __func__);
+ if (!getenv("serial#"))
+ g_dnl_set_serialnumber(CONFIG_USB_SERIALNO);
+ return 0;
+}
+
+int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+ debug("%s\n", __func__);
+ return 1;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+ debug("%s\n", __func__);
+ return 0;
+}
+#endif
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 70bb550..d370f1c 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
obj-$(CONFIG_DFU_FUNCTION) += f_dfu.o
obj-$(CONFIG_USB_GADGET_MASS_STORAGE) += f_mass_storage.o
obj-$(CONFIG_CMD_FASTBOOT) += f_fastboot.o
+obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
endif
ifdef CONFIG_USB_ETHER
obj-y += ether.o
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index 900dc42..e5fdc90 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -109,6 +109,7 @@
* for example.
*/
#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
/* version string, parser, etc */
#define CONFIG_VERSION_VARIABLE
@@ -136,4 +137,23 @@
#undef CONFIG_CMD_NFS
+/* Fastboot and USB OTG */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - (1024 * 1024))
+#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 0
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
+#define CONFIG_USB_GADGET_PHY_8_BIT
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USBID_ADDR 0x34052c46
+#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
+#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
+#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
+
#endif /* __BCM28155_AP_H */
--
1.8.5
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 4/4] implement Fastboot via USB OTG on bcm28155_ap boards
2015-07-06 16:52 ` [U-Boot] [PATCH 4/4] implement Fastboot via USB OTG on bcm28155_ap boards Steve Rae
@ 2015-07-06 18:22 ` Paul Kocialkowski
2015-07-06 19:22 ` Steve Rae
0 siblings, 1 reply; 7+ messages in thread
From: Paul Kocialkowski @ 2015-07-06 18:22 UTC (permalink / raw)
To: u-boot
Hi,
Le lundi 06 juillet 2015 ? 09:52 -0700, Steve Rae a ?crit :
> From: "JD (Jiandong) Zheng" <jdzheng@broadcom.com>
>
> Signed-off-by: Steve Rae <srae@broadcom.com>
> ---
>
> board/broadcom/bcm28155_ap/bcm28155_ap.c | 40 ++++++++++++++++++++++++++++++++
> drivers/usb/gadget/Makefile | 1 +
> include/configs/bcm28155_ap.h | 20 ++++++++++++++++
> 3 files changed, 61 insertions(+)
>
> diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c
> index 940a1c2..20eb191 100644
> --- a/board/broadcom/bcm28155_ap/bcm28155_ap.c
> +++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c
> @@ -12,12 +12,20 @@
> #include <asm/kona-common/clk.h>
> #include <asm/arch/sysmap.h>
>
> +#include <usb.h>
> +#include <usb/s3c_udc.h>
> +#include <g_dnl.h>
> +
> #define SECWATCHDOG_SDOGCR_OFFSET 0x00000000
> #define SECWATCHDOG_SDOGCR_EN_SHIFT 27
> #define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT 26
> #define SECWATCHDOG_SDOGCR_CLKS_SHIFT 20
> #define SECWATCHDOG_SDOGCR_LD_SHIFT 0
>
> +#ifndef CONFIG_USB_SERIALNO
> +#define CONFIG_USB_SERIALNO "1234567890"
> +#endif
> +
> DECLARE_GLOBAL_DATA_PTR;
>
> /*
> @@ -85,3 +93,35 @@ int board_mmc_init(bd_t *bis)
> return ret;
> }
> #endif
> +
> +#ifdef CONFIG_USB_GADGET
> +static struct s3c_plat_otg_data bcm_otg_data = {
> + .regs_otg = HSOTG_BASE_ADDR
> +};
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> + debug("%s: performing s3c_udc_probe\n", __func__);
> + return s3c_udc_probe(&bcm_otg_data);
> +}
> +
> +int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
> +{
> + debug("%s\n", __func__);
> + if (!getenv("serial#"))
> + g_dnl_set_serialnumber(CONFIG_USB_SERIALNO);
> + return 0;
> +}
> +
> +int g_dnl_get_board_bcd_device_number(int gcnum)
> +{
> + debug("%s\n", __func__);
> + return 1;
> +}
> +
> +int board_usb_cleanup(int index, enum usb_init_type init)
> +{
> + debug("%s\n", __func__);
> + return 0;
> +}
> +#endif
> diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
> index 70bb550..d370f1c 100644
> --- a/drivers/usb/gadget/Makefile
> +++ b/drivers/usb/gadget/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
> obj-$(CONFIG_DFU_FUNCTION) += f_dfu.o
> obj-$(CONFIG_USB_GADGET_MASS_STORAGE) += f_mass_storage.o
> obj-$(CONFIG_CMD_FASTBOOT) += f_fastboot.o
> +obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
> endif
> ifdef CONFIG_USB_ETHER
> obj-y += ether.o
> diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
> index 900dc42..e5fdc90 100644
> --- a/include/configs/bcm28155_ap.h
> +++ b/include/configs/bcm28155_ap.h
> @@ -109,6 +109,7 @@
> * for example.
> */
> #define CONFIG_DOS_PARTITION
> +#define CONFIG_EFI_PARTITION
>
> /* version string, parser, etc */
> #define CONFIG_VERSION_VARIABLE
> @@ -136,4 +137,23 @@
>
> #undef CONFIG_CMD_NFS
>
> +/* Fastboot and USB OTG */
> +#define CONFIG_CMD_FASTBOOT
> +#define CONFIG_FASTBOOT_FLASH
> +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
> +#define CONFIG_SYS_CACHELINE_SIZE 64
> +#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - (1024 * 1024))
> +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_USB_GADGET
> +#define CONFIG_USB_GADGET_DUALSPEED
> +#define CONFIG_USB_GADGET_VBUS_DRAW 0
> +#define CONFIG_USB_GADGET_S3C_UDC_OTG
> +#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
> +#define CONFIG_USB_GADGET_PHY_8_BIT
> +#define CONFIG_USBDOWNLOAD_GADGET
You should probably rebase this against u-boot-dfu's latest HEAD, and
adapt for the renames I made (for consistency)!
> +#define CONFIG_USBID_ADDR 0x34052c46
> +#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
> +#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
> +#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
> +
> #endif /* __BCM28155_AP_H */
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150706/8eade7bd/attachment.sig>
^ permalink raw reply [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 4/4] implement Fastboot via USB OTG on bcm28155_ap boards
2015-07-06 18:22 ` Paul Kocialkowski
@ 2015-07-06 19:22 ` Steve Rae
0 siblings, 0 replies; 7+ messages in thread
From: Steve Rae @ 2015-07-06 19:22 UTC (permalink / raw)
To: u-boot
On 15-07-06 11:22 AM, Paul Kocialkowski wrote:
> Hi,
>
> Le lundi 06 juillet 2015 ? 09:52 -0700, Steve Rae a ?crit :
>> From: "JD (Jiandong) Zheng" <jdzheng@broadcom.com>
>>
>> Signed-off-by: Steve Rae <srae@broadcom.com>
>> ---
>>
>> board/broadcom/bcm28155_ap/bcm28155_ap.c | 40 ++++++++++++++++++++++++++++++++
>> drivers/usb/gadget/Makefile | 1 +
>> include/configs/bcm28155_ap.h | 20 ++++++++++++++++
>> 3 files changed, 61 insertions(+)
>>
>> diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c
>> index 940a1c2..20eb191 100644
>> --- a/board/broadcom/bcm28155_ap/bcm28155_ap.c
>> +++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c
>> @@ -12,12 +12,20 @@
>> #include <asm/kona-common/clk.h>
>> #include <asm/arch/sysmap.h>
>>
>> +#include <usb.h>
>> +#include <usb/s3c_udc.h>
>> +#include <g_dnl.h>
>> +
>> #define SECWATCHDOG_SDOGCR_OFFSET 0x00000000
>> #define SECWATCHDOG_SDOGCR_EN_SHIFT 27
>> #define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT 26
>> #define SECWATCHDOG_SDOGCR_CLKS_SHIFT 20
>> #define SECWATCHDOG_SDOGCR_LD_SHIFT 0
>>
>> +#ifndef CONFIG_USB_SERIALNO
>> +#define CONFIG_USB_SERIALNO "1234567890"
>> +#endif
>> +
>> DECLARE_GLOBAL_DATA_PTR;
>>
>> /*
>> @@ -85,3 +93,35 @@ int board_mmc_init(bd_t *bis)
>> return ret;
>> }
>> #endif
>> +
>> +#ifdef CONFIG_USB_GADGET
>> +static struct s3c_plat_otg_data bcm_otg_data = {
>> + .regs_otg = HSOTG_BASE_ADDR
>> +};
>> +
>> +int board_usb_init(int index, enum usb_init_type init)
>> +{
>> + debug("%s: performing s3c_udc_probe\n", __func__);
>> + return s3c_udc_probe(&bcm_otg_data);
>> +}
>> +
>> +int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
>> +{
>> + debug("%s\n", __func__);
>> + if (!getenv("serial#"))
>> + g_dnl_set_serialnumber(CONFIG_USB_SERIALNO);
>> + return 0;
>> +}
>> +
>> +int g_dnl_get_board_bcd_device_number(int gcnum)
>> +{
>> + debug("%s\n", __func__);
>> + return 1;
>> +}
>> +
>> +int board_usb_cleanup(int index, enum usb_init_type init)
>> +{
>> + debug("%s\n", __func__);
>> + return 0;
>> +}
>> +#endif
>> diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
>> index 70bb550..d370f1c 100644
>> --- a/drivers/usb/gadget/Makefile
>> +++ b/drivers/usb/gadget/Makefile
>> @@ -20,6 +20,7 @@ obj-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
>> obj-$(CONFIG_DFU_FUNCTION) += f_dfu.o
>> obj-$(CONFIG_USB_GADGET_MASS_STORAGE) += f_mass_storage.o
>> obj-$(CONFIG_CMD_FASTBOOT) += f_fastboot.o
>> +obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
>> endif
>> ifdef CONFIG_USB_ETHER
>> obj-y += ether.o
>> diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
>> index 900dc42..e5fdc90 100644
>> --- a/include/configs/bcm28155_ap.h
>> +++ b/include/configs/bcm28155_ap.h
>> @@ -109,6 +109,7 @@
>> * for example.
>> */
>> #define CONFIG_DOS_PARTITION
>> +#define CONFIG_EFI_PARTITION
>>
>> /* version string, parser, etc */
>> #define CONFIG_VERSION_VARIABLE
>> @@ -136,4 +137,23 @@
>>
>> #undef CONFIG_CMD_NFS
>>
>> +/* Fastboot and USB OTG */
>> +#define CONFIG_CMD_FASTBOOT
>> +#define CONFIG_FASTBOOT_FLASH
>> +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
>> +#define CONFIG_SYS_CACHELINE_SIZE 64
>> +#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - (1024 * 1024))
>> +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
>> +#define CONFIG_USB_GADGET
>> +#define CONFIG_USB_GADGET_DUALSPEED
>> +#define CONFIG_USB_GADGET_VBUS_DRAW 0
>> +#define CONFIG_USB_GADGET_S3C_UDC_OTG
>> +#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
>> +#define CONFIG_USB_GADGET_PHY_8_BIT
>> +#define CONFIG_USBDOWNLOAD_GADGET
>
> You should probably rebase this against u-boot-dfu's latest HEAD, and
> adapt for the renames I made (for consistency)!
OK -- see v2
>
>> +#define CONFIG_USBID_ADDR 0x34052c46
>> +#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
>> +#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
>> +#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
>> +
>> #endif /* __BCM28155_AP_H */
>
^ permalink raw reply [flat|nested] 7+ messages in thread