[U-Boot] [PATCH v2 2/4] usb: s3c-otg: support 8-bit interface

[Steve Rae <srae@broadcom.com>]

On 15-07-07 06:27 AM, Lukasz Majewski wrote:
> Hi Steve,
>
>> Signed-off-by: Steve Rae <srae@broadcom.com>
>> ---
>>
>> Changes in v2: None
>>
>>   drivers/usb/gadget/s3c_udc_otg.c | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/usb/gadget/s3c_udc_otg.c
>> b/drivers/usb/gadget/s3c_udc_otg.c index 7a2d1e7..2e3b4f7 100644
>> --- a/drivers/usb/gadget/s3c_udc_otg.c
>> +++ b/drivers/usb/gadget/s3c_udc_otg.c
>> @@ -414,7 +414,11 @@ static void reconfig_usbd(struct s3c_udc *dev)
>>   		|0<<7		/* Ulpi DDR sel*/
>>   		|0<<6		/* 0: high speed utmi+, 1: full
>> speed serial*/ |0<<4		/* 0: utmi+, 1:ulpi*/
>> +#ifdef CONFIG_USB_GADGET_PHY_8_BIT
>> +		|0<<3		/* phy i/f  0:8bit, 1:16bit*/
>> +#else
>>   		|1<<3		/* phy i/f  0:8bit, 1:16bit*/
>> +#endif
>
> Is your board using also host phy? As fair as I remember, the upper 8
> bits are for host interface.
Hi Lukasz,
Are you suggesting that we define this as a 16-bit interface, and then 
only use the upper 8-bits (to achieve the 8-bit interface)?
Please clarify, Thanks Steve
>
>
>>   		|0x7<<0;	/* HS/FS Timeout**/
>>
>>   	if (dev->pdata->usb_gusbcfg)
>
> Despite my above question:
>
> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
>