[U-Boot] [PATCH RESEND] tools/imximage: set DCD pointer to NULL when its length is 0

[Stefano Babic <sbabic@denx.de>]

Hi Baruch,

On 09/07/2015 17:19, Baruch Siach wrote:
> When dcd_len is 0 the Write Data command that the set_dcd_rst_v2() routine
> generates is empty. This causes HAB to complain that the command is invalid.
> 
> --------- HAB Event 1 -----------------
> event data:
> 	0xdb 0x00 0x0c 0x41 0x33 0x06 0xc0 0x00
> 	0xcc 0x00 0x04 0x04
> 
> To fix this set the DCD pointer in the IVT to NULL in this case. The DCD header
> itself is still needed for detect_imximage_version() to determine the image
> version.
> 
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> ---
> Resending with a proper To: header.
> 
>  tools/imximage.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/tools/imximage.c b/tools/imximage.c
> index 6f469ae6336c..7b91d09699ad 100644
> --- a/tools/imximage.c
> +++ b/tools/imximage.c
> @@ -250,7 +250,11 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len,
>  	hdr_base = entry_point - imximage_init_loadsize +
>  		flash_offset;
>  	fhdr_v2->self = hdr_base;
> -	fhdr_v2->dcd_ptr = hdr_base + offsetof(imx_header_v2_t, dcd_table);
> +	if (dcd_len > 0)
> +		fhdr_v2->dcd_ptr = hdr_base
> +			+ offsetof(imx_header_v2_t, dcd_table);
> +	else
> +		fhdr_v2->dcd_ptr = 0;
>  	fhdr_v2->boot_data_ptr = hdr_base
>  			+ offsetof(imx_header_v2_t, boot_data);
>  	hdr_v2->boot_data.start = entry_point - imximage_init_loadsize;
> 

It looks ok for me.

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================