From: Przemyslaw Marczak <p.marczak@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/55] exynos: dts: Sync up I2C ports with the kernel
Date: Fri, 10 Jul 2015 13:51:36 +0200 [thread overview]
Message-ID: <559FB1C8.6090508@samsung.com> (raw)
In-Reply-To: <1435882592-487-12-git-send-email-sjg@chromium.org>
Hello Simon,
On 07/03/2015 02:15 AM, Simon Glass wrote:
> The kernel uses upper case for I2C unit addresses. Follow the same
> convention to reduce differences.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> arch/arm/dts/exynos5.dtsi | 34 ++++++++++++++++-----------------
> arch/arm/dts/exynos5250-arndale.dts | 16 ++++++++--------
> arch/arm/dts/exynos5250-smdk5250.dts | 21 ++++++++++----------
> arch/arm/dts/exynos5250-snow.dts | 32 +++++++++++++++++--------------
> arch/arm/dts/exynos5250.dtsi | 24 +++++++++++------------
> arch/arm/dts/exynos5420-peach-pit.dts | 8 ++++----
> arch/arm/dts/exynos5420-smdk5420.dts | 4 ++--
> arch/arm/dts/exynos54xx.dtsi | 36 +++++++++++++++++------------------
> arch/arm/dts/exynos5800-peach-pi.dts | 8 ++++----
> 9 files changed, 94 insertions(+), 89 deletions(-)
>
> diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi
> index 238acb8..179584c 100644
> --- a/arch/arm/dts/exynos5.dtsi
> +++ b/arch/arm/dts/exynos5.dtsi
> @@ -72,39 +72,39 @@
> interrupts = <1 9 0xf04>;
> };
>
> - i2c at 12c60000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + i2c_0: i2c at 12C60000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C60000 0x100>;
> interrupts = <0 56 0>;
> - };
> -
> - i2c at 12c70000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_1: i2c at 12C70000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C70000 0x100>;
> interrupts = <0 57 0>;
> - };
> -
> - i2c at 12c80000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_2: i2c at 12C80000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C80000 0x100>;
> interrupts = <0 58 0>;
> - };
> -
> - i2c at 12c90000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_3: i2c at 12C90000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C90000 0x100>;
> interrupts = <0 59 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
>
> - spi at 12d20000 {
> + spi_0: spi at 12d20000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> @@ -112,7 +112,7 @@
> interrupts = <0 68 0>;
> };
>
> - spi at 12d30000 {
> + spi_1: spi at 12d30000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> @@ -120,7 +120,7 @@
> interrupts = <0 69 0>;
> };
>
> - spi at 12d40000 {
> + spi_2: spi at 12d40000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> @@ -129,7 +129,7 @@
> interrupts = <0 70 0>;
> };
>
> - spi at 131a0000 {
> + spi_3: spi at 131a0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> @@ -137,7 +137,7 @@
> interrupts = <0 129 0>;
> };
>
> - spi at 131b0000 {
> + spi_4: spi at 131b0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> diff --git a/arch/arm/dts/exynos5250-arndale.dts b/arch/arm/dts/exynos5250-arndale.dts
> index 21c0a21..031c622 100644
> --- a/arch/arm/dts/exynos5250-arndale.dts
> +++ b/arch/arm/dts/exynos5250-arndale.dts
> @@ -15,14 +15,14 @@
> compatible = "samsung,arndale", "samsung,exynos5250";
>
> aliases {
> - i2c0 = "/i2c at 12c60000";
> - i2c1 = "/i2c at 12c70000";
> - i2c2 = "/i2c at 12c80000";
> - i2c3 = "/i2c at 12c90000";
> - i2c4 = "/i2c at 12ca0000";
> - i2c5 = "/i2c at 12cb0000";
> - i2c6 = "/i2c at 12cc0000";
> - i2c7 = "/i2c at 12cd0000";
> + i2c0 = "/i2c at 12C60000";
> + i2c1 = "/i2c at 12C70000";
> + i2c2 = "/i2c at 12C80000";
> + i2c3 = "/i2c at 12C90000";
> + i2c4 = "/i2c at 12CA0000";
> + i2c5 = "/i2c at 12CB0000";
> + i2c6 = "/i2c at 12CC0000";
> + i2c7 = "/i2c at 12CD0000";
> serial0 = "/serial at 12C20000";
> console = "/serial at 12C20000";
> };
> diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts
> index 3cebfc2..636fec9 100644
> --- a/arch/arm/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/dts/exynos5250-smdk5250.dts
> @@ -11,20 +11,21 @@
>
> /dts-v1/;
> #include "exynos5250.dtsi"
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
> compatible = "samsung,smdk5250", "samsung,exynos5250";
>
> aliases {
> - i2c0 = "/i2c at 12c60000";
> - i2c1 = "/i2c at 12c70000";
> - i2c2 = "/i2c at 12c80000";
> - i2c3 = "/i2c at 12c90000";
> - i2c4 = "/i2c at 12ca0000";
> - i2c5 = "/i2c at 12cb0000";
> - i2c6 = "/i2c at 12cc0000";
> - i2c7 = "/i2c at 12cd0000";
> + i2c0 = "/i2c at 12C60000";
> + i2c1 = "/i2c at 12C70000";
> + i2c2 = "/i2c at 12C80000";
> + i2c3 = "/i2c at 12C90000";
> + i2c4 = "/i2c at 12CA0000";
> + i2c5 = "/i2c at 12CB0000";
> + i2c6 = "/i2c at 12CC0000";
> + i2c7 = "/i2c at 12CD0000";
> spi0 = "/spi at 12d20000";
> spi1 = "/spi at 12d30000";
> spi2 = "/spi at 12d40000";
> @@ -58,14 +59,14 @@
> status = "disabled";
> };
>
> - i2c at 12c70000 {
> + i2c at 12C70000 {
> soundcodec at 1a {
> reg = <0x1a>;
> compatible = "wolfson,wm8994-codec";
> };
> };
>
> - i2c at 12c60000 {
> + i2c at 12C60000 {
> pmic at 9 {
> reg = <0x9>;
> compatible = "maxim,max77686";
> diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
> index e4b3dc2..9abe0b7 100644
> --- a/arch/arm/dts/exynos5250-snow.dts
> +++ b/arch/arm/dts/exynos5250-snow.dts
> @@ -7,24 +7,27 @@
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> -*/
> + */
>
> /dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
> #include "exynos5250.dtsi"
>
> / {
> model = "Google Snow";
> - compatible = "google,snow", "samsung,exynos5250";
> + compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
>
> aliases {
> - i2c0 = "/i2c at 12c60000";
> - i2c1 = "/i2c at 12c70000";
> - i2c2 = "/i2c at 12c80000";
> - i2c3 = "/i2c at 12c90000";
> - i2c4 = "/i2c at 12ca0000";
> - i2c5 = "/i2c at 12cb0000";
> - i2c6 = "/i2c at 12cc0000";
> - i2c7 = "/i2c at 12cd0000";
> + i2c0 = "/i2c at 12C60000";
> + i2c1 = "/i2c at 12C70000";
> + i2c2 = "/i2c at 12C80000";
> + i2c3 = "/i2c at 12C90000";
> + i2c4 = "/i2c at 12CA0000";
> + i2c5 = "/i2c at 12CB0000";
> + i2c6 = "/i2c at 12CC0000";
> + i2c7 = "/i2c at 12CD0000";
> spi0 = "/spi at 12d20000";
> spi1 = "/spi at 12d30000";
> spi2 = "/spi at 12d40000";
> @@ -39,7 +42,7 @@
> i2s = "/sound at 3830000";
> };
>
> - i2c4: i2c at 12ca0000 {
> + i2c4: i2c at 12CA0000 {
> cros_ec: cros-ec at 1e {
> reg = <0x1e>;
> compatible = "google,cros-ec-i2c";
> @@ -66,6 +69,7 @@
> spi-max-frequency = <1000000>;
> spi-deactivate-delay = <100>;
>
> + /* Snow did support SPI but the released version used I2C */
> embedded-controller {
> compatible = "google,cros-ec-i2c";
> reg = <0x1e>;
> @@ -85,7 +89,7 @@
> status = "disabled";
> };
>
> - i2c at 12cd0000 {
> + i2c at 12CD0000 {
> soundcodec at 22 {
> reg = <0x22>;
> compatible = "maxim,max98095-codec";
> @@ -105,8 +109,8 @@
> };
> };
>
> - i2c at 12c60000 {
> - pmic at 9 {
> + i2c at 12C60000 {
> + max77686 at 09 {
> reg = <0x9>;
> compatible = "maxim,max77686";
> };
> diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
> index ccbafe9..7eef3e3 100644
> --- a/arch/arm/dts/exynos5250.dtsi
> +++ b/arch/arm/dts/exynos5250.dtsi
> @@ -47,36 +47,36 @@
> interrupts = <0 47 0>;
> };
>
> - i2c at 12ca0000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + i2c_4: i2c at 12CA0000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12CA0000 0x100>;
> interrupts = <0 60 0>;
> - };
> -
> - i2c at 12cb0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_5: i2c at 12CB0000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12CB0000 0x100>;
> interrupts = <0 61 0>;
> - };
> -
> - i2c at 12cc0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_6: i2c at 12CC0000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12CC0000 0x100>;
> interrupts = <0 62 0>;
> - };
> -
> - i2c at 12cd0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_7: i2c at 12CD0000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12CD0000 0x100>;
> interrupts = <0 63 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
>
> sound at 3830000 {
> diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts
> index 6fe762d..0f1002e 100644
> --- a/arch/arm/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/dts/exynos5420-peach-pit.dts
> @@ -25,7 +25,7 @@
> aliases {
> serial0 = "/serial at 12C30000";
> console = "/serial at 12C30000";
> - pmic = "/i2c at 12ca0000";
> + pmic = "/i2c at 12CA0000";
> };
>
> dmc {
> @@ -49,7 +49,7 @@
> };
>
> /* MAX77802 is on i2c bus 4 */
> - i2c at 12ca0000 {
> + i2c at 12CA0000 {
> clock-frequency = <400000>;
> power-regulator at 9 {
> compatible = "maxim,max77802-pmic";
> @@ -57,7 +57,7 @@
> };
> };
>
> - i2c at 12cd0000 { /* i2c7 */
> + i2c at 12CD0000 { /* i2c7 */
> clock-frequency = <100000>;
> soundcodec at 20 {
> reg = <0x20>;
> @@ -76,7 +76,7 @@
> samsung,codec-type = "max98090";
> };
>
> - i2c at 12e10000 { /* i2c9 */
> + i2c at 12E10000 { /* i2c9 */
> clock-frequency = <400000>;
> tpm at 20 {
> compatible = "infineon,slb9645tt";
> diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts
> index 6855027..015ff15 100644
> --- a/arch/arm/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/dts/exynos5420-smdk5420.dts
> @@ -37,7 +37,7 @@
> };
>
> /* s2mps11 is on i2c bus 4 */
> - i2c at 12ca0000 {
> + i2c at 12CA0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> pmic at 66 {
> @@ -82,7 +82,7 @@
> samsung,codec-type = "wm8994";
> };
>
> - i2c at 12c70000 {
> + i2c at 12C70000 {
> soundcodec at 1a {
> reg = <0x1a>;
> compatible = "wolfson,wm8994-codec";
> diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi
> index 31fabb1..bd3619d 100644
> --- a/arch/arm/dts/exynos54xx.dtsi
> +++ b/arch/arm/dts/exynos54xx.dtsi
> @@ -14,17 +14,17 @@
> };
>
> aliases {
> - i2c0 = "/i2c at 12c60000";
> - i2c1 = "/i2c at 12c70000";
> - i2c2 = "/i2c at 12c80000";
> - i2c3 = "/i2c at 12c90000";
> - i2c4 = "/i2c at 12ca0000";
> - i2c5 = "/i2c at 12cb0000";
> - i2c6 = "/i2c at 12cc0000";
> - i2c7 = "/i2c at 12cd0000";
> - i2c8 = "/i2c at 12e00000";
> - i2c9 = "/i2c at 12e10000";
> - i2c10 = "/i2c at 12e20000";
> + i2c0 = "/i2c at 12C60000";
> + i2c1 = "/i2c at 12C70000";
> + i2c2 = "/i2c at 12C80000";
> + i2c3 = "/i2c at 12C90000";
> + i2c4 = "/i2c at 12CA0000";
> + i2c5 = "/i2c at 12CB0000";
> + i2c6 = "/i2c at 12CC0000";
> + i2c7 = "/i2c at 12CD0000";
> + i2c8 = "/i2c at 12E00000";
> + i2c9 = "/i2c at 12E10000";
> + i2c10 = "/i2c at 12E20000";
> pinctrl0 = &pinctrl_0;
> pinctrl1 = &pinctrl_1;
> pinctrl2 = &pinctrl_2;
> @@ -42,7 +42,7 @@
> xhci1 = "/xhci at 12400000";
> };
>
> - i2c at 12ca0000 {
> + i2c at 12CA0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -50,7 +50,7 @@
> interrupts = <0 60 0>;
> };
>
> - i2c at 12cb0000 {
> + i2c at 12CB0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -58,7 +58,7 @@
> interrupts = <0 61 0>;
> };
>
> - i2c at 12cc0000 {
> + i2c at 12CC0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -66,7 +66,7 @@
> interrupts = <0 62 0>;
> };
>
> - i2c at 12cd0000 {
> + i2c at 12CD0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -74,7 +74,7 @@
> interrupts = <0 63 0>;
> };
>
> - i2c at 12e00000 {
> + i2c at 12E00000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -82,7 +82,7 @@
> interrupts = <0 87 0>;
> };
>
> - i2c at 12e10000 {
> + i2c at 12E10000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -90,7 +90,7 @@
> interrupts = <0 88 0>;
> };
>
> - i2c at 12e20000 {
> + i2c at 12E20000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
> index 176ce55..4e548f7 100644
> --- a/arch/arm/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/dts/exynos5800-peach-pi.dts
> @@ -25,7 +25,7 @@
> aliases {
> serial0 = "/serial at 12C30000";
> console = "/serial at 12C30000";
> - pmic = "/i2c at 12ca0000";
> + pmic = "/i2c at 12CA0000";
> };
>
> dmc {
> @@ -49,7 +49,7 @@
> };
>
> /* MAX77802 is on i2c bus 4 */
> - i2c at 12ca0000 {
> + i2c at 12CA0000 {
> clock-frequency = <400000>;
> power-regulator at 9 {
> compatible = "maxim,max77802-pmic";
> @@ -57,7 +57,7 @@
> };
> };
>
> - i2c at 12cd0000 { /* i2c7 */
> + i2c at 12CD0000 { /* i2c7 */
> clock-frequency = <100000>;
> soundcodec at 20 {
> reg = <0x20>;
> @@ -69,7 +69,7 @@
> samsung,codec-type = "max98090";
> };
>
> - i2c at 12e10000 { /* i2c9 */
> + i2c at 12E10000 { /* i2c9 */
> clock-frequency = <400000>;
> tpm at 20 {
> compatible = "infineon,slb9645tt";
>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Best regards
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
next prev parent reply other threads:[~2015-07-10 11:51 UTC|newest]
Thread overview: 139+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-03 0:15 [U-Boot] [PATCH 00/55] dm: exynos: Driver model improvements leading to spring support Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 01/55] dm: core: Support finding a device by phandle Simon Glass
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 02/55] dm: i2c: Add a message debug function Simon Glass
2015-07-03 6:52 ` Heiko Schocher denx
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 03/55] dm: i2c: Correct comment nits in dm_i2c_reg_read/write() Simon Glass
2015-07-03 6:53 ` Heiko Schocher denx
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 04/55] dm: i2c: Move definitions to the top of the header file Simon Glass
2015-07-03 6:55 ` Heiko Schocher denx
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 05/55] dm: i2c: Add a function to transfer messages Simon Glass
2015-07-03 6:58 ` Heiko Schocher denx
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 06/55] dm: i2c: Add support for multiplexed I2C buses Simon Glass
2015-07-05 6:10 ` Heiko Schocher
2015-07-06 16:38 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 07/55] exynos: i2c: Correct bug in pinmux selection Simon Glass
2015-07-05 6:15 ` Heiko Schocher
2015-07-06 15:27 ` Simon Glass
2015-07-07 1:36 ` Minkyu Kang
2015-07-08 2:38 ` Simon Glass
2015-07-10 1:43 ` Minkyu Kang
2015-07-10 1:46 ` Simon Glass
2015-07-10 8:56 ` Przemyslaw Marczak
2015-07-10 12:14 ` Minkyu Kang
2015-07-07 6:51 ` Przemyslaw Marczak
2015-07-03 0:15 ` [U-Boot] [PATCH 08/55] i2c: Add a mux for GPIO-based I2C bus arbitration Simon Glass
2015-07-05 6:43 ` Heiko Schocher
2015-07-06 16:38 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 09/55] exynos: i2c: Fix code style with ReadWriteByte() Simon Glass
2015-07-05 6:45 ` Heiko Schocher
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 10/55] exynos: i2c: Tidy up the driver model code Simon Glass
2015-07-06 5:40 ` Heiko Schocher
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 11/55] exynos: dts: Sync up I2C ports with the kernel Simon Glass
2015-07-10 11:51 ` Przemyslaw Marczak [this message]
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 12/55] exynos: dts: Add PMIC and regulator definitions Simon Glass
2015-07-10 11:51 ` Przemyslaw Marczak
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 13/55] exynos: dts: Support EC tunnel and main TPS65090 regulator Simon Glass
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 14/55] dm: cros_ec: Convert the I2C tunnel code to use driver model Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 15/55] cros_ec: Support the LDO access method used by spring Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 16/55] exynos: serial: Refactor init code for debug UART Simon Glass
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 17/55] exynos: Add debug UART support for Samsung S5P serial Simon Glass
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 18/55] exynos: Enable the debug UART in SPL Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 19/55] dm: gpio: Add support for setting a GPIO's pull direction Simon Glass
2015-07-05 4:55 ` Masahiro Yamada
2015-07-06 16:39 ` Simon Glass
2015-07-06 17:20 ` Masahiro Yamada
2015-07-06 17:33 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 20/55] dm: exynos: gpio: Support pull-up/down in GPIOs Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 21/55] dm: power: Add a new driver for the TPS65090 PMIC Simon Glass
2015-07-10 11:52 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 22/55] dm: power: Add support for TPS65090 FETs Simon Glass
2015-07-10 11:52 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 23/55] dm: power: Add support for the S5M8767 PMIC Simon Glass
2015-07-10 11:52 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 24/55] dm: power: Add support for S5M8767 regulators Simon Glass
2015-07-10 11:52 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 25/55] dm: pmic: max77686: Correct a few nits Simon Glass
2015-07-10 11:53 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-28 6:19 ` Przemyslaw Marczak
2015-08-03 14:02 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 26/55] dm: pmic: Correct the pmic_reg_write() implementation Simon Glass
2015-07-10 11:53 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 27/55] dm: power: max77686: Correct BUCK register access Simon Glass
2015-07-10 11:53 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 28/55] dm: pmic: max77686: Support all BUCK regulators Simon Glass
2015-07-10 11:53 ` Przemyslaw Marczak
2015-07-30 2:05 ` Simon Glass
2015-07-30 8:22 ` Przemyslaw Marczak
2015-08-03 14:05 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 29/55] dm: power: Don't return an error when regulators are not autoset Simon Glass
2015-07-10 11:54 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 30/55] dm: pmic: Display the regulator limits on error Simon Glass
2015-07-10 11:54 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 31/55] dm: video: Add support for video bridges Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 32/55] dm: video: Add support for the Parade PS8622/625 bridge Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 33/55] dm: video: Add support for the NXP PTN3460 bridge Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 34/55] exynos: spi: Convert the timeout to debug() Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 35/55] exynos: Correct return value in exynos_mmc_init() Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 36/55] exynos: Add support for the DisplayPort hotplug detect Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 37/55] exynos: video: Correct debug output Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 38/55] exynos: Tidy up CPU frequency display Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 39/55] dm: gpio: Check a GPIO is valid before using it Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 40/55] dts: exynos: snow: Add memory layout description Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 41/55] dts: exynos: pit: Add a new node for the parade video bridge driver Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 42/55] dts: exynos: snow: Add a new node for the NXP " Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 43/55] exynos: dts: Drop the old TPS65090 I2C node Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 44/55] exynos: Add common board code for exynos5 boards that use device tree Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 45/55] exynos: Enable new features for exynos5 boards Simon Glass
2015-07-10 11:55 ` Przemyslaw Marczak
2015-07-28 16:29 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 46/55] exynos: Remove unneeded device tree control #ifdefs Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 47/55] exynos: config: Move common options to the common headers and tidy up Simon Glass
2015-07-10 11:56 ` Przemyslaw Marczak
2015-07-03 0:16 ` [U-Boot] [PATCH 48/55] exynos: Drop old exynos5420-specific board code Simon Glass
2015-07-10 11:56 ` Przemyslaw Marczak
2015-07-03 0:16 ` [U-Boot] [PATCH 49/55] exynos: Drop old exynos5250-specific " Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 50/55] power: Remove old TPS65090 drivers Simon Glass
2015-07-10 11:56 ` Przemyslaw Marczak
2015-07-03 0:16 ` [U-Boot] [PATCH 51/55] cros_ec: Remove the old tunnel code Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 52/55] video: Remove the old parade driver Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 53/55] dts: Drop unused compatible ID for the NXP video bridge Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 54/55] exynos: video: Remove non-device-tree code Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 55/55] exynos: Add support for spring Simon Glass
2015-07-20 14:19 ` [U-Boot] [PATCH 00/55] dm: exynos: Driver model improvements leading to spring support Simon Glass
2015-07-22 4:52 ` Minkyu Kang
2015-07-23 2:08 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559FB1C8.6090508@samsung.com \
--to=p.marczak@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox