[U-Boot] [PATCH V2 4/4] configs: ti_armv7_keystone2: start using armv7_common

[Nishanth Menon <nm@ti.com>]

On 07/17/2015 12:11 PM, Murali Karicheri wrote:
> On 07/17/2015 12:52 PM, Nishanth Menon wrote:
>> On 07/17/2015 11:04 AM, Murali Karicheri wrote:
>>> On 07/16/2015 03:08 PM, Nishanth Menon wrote:
>>>> Try to maintain as much commonality by conditionally including stuff
>>>> in armv7_common as necessary and removing the common defines from
>>>> keystone2 header.
>>>>
>>> Including the common ti_armv7_common.h for keystone also add duplication
>>> of the various addresses
>>>
>>> #define DEFAULT_LINUX_BOOT_ENV \
>>>      "loadaddr=0x82000000\0" \
>>>      "kernel_addr_r=0x82000000\0" \
>>>      "fdtaddr=0x88000000\0" \
>>>      "fdt_addr_r=0x88000000\0" \
>>>      "rdaddr=0x88080000\0" \
>>>      "ramdisk_addr_r=0x88080000\0" \
>>>      "bootm_size=0x10000000\0"
>>>
>>> Some of these are also defined in keystone common file. The env scripts
>>> for keystone to be reworked to use the common variable above.
>>>
>>> Rework the CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS to include common as
>>> well.
>>
>> we need to cleanup all the variables  once we get the distro config
> 
> What do you mean by distro config? Could you explain?

include/config_distro* - both will eventually get integrated into
armv7_common.h to benefit all TI SoC platforms.

> 
>> included in anyways... I had decided not to rock the apple cart too much
>> with this patch -> just the basic consolidation with as minimal changes
>> as necessary. inclusion of DEFAULT_LINUX_BOOT_ENV into keystone2.h can
>> be done as a follow on patch.
> 
> Probably not this one. User would see both these variables and will
> cause confusion and should be fixed.
> 

they are no variables, they are defines. they will eventually be fixed.
I am leery to make a huge jump on a single series. lets do consolidation
in small baby steps please.

as I have already shown in my reply - the status quo is being maintained
and we are one step closer to an common framework.

>>
>>>>
>>>> diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
>>>> index ac50a01b2980..f1e650141ae1 100644
>>>> --- a/include/configs/k2e_evm.h
>>>> +++ b/include/configs/k2e_evm.h
>>>> @@ -15,8 +15,6 @@
>>>>    #define CONFIG_K2E_EVM
>>>>
>>>>    /* U-Boot general configuration */
>>>> -#define CONFIG_SYS_PROMPT               "K2E EVM # "
>>>
>>> Why remove this?
>>
>> arm_v7_common defines just "u-boot#" for all SoC and boards. So, we dont
>> need this.
> 
> Sorry, this may be needed from the automation perspective. Also for
> backward compatibility for users. Would like to keep for K2.

This has been beaten to death in the past as well (I think some 3/4
years ago.. i think it should be in the archives, just too lazy to dig
through multi-year old discussions)..

I will let Tom comment more here. My understanding is that the
convention followed by all other TI SoCs will imply not having custom
sys_prompt..


That said, custom sys_prompt is NOT a need from automation perspective -
we have all our boards in automation farm for years now with and without
custom boot prompt. board identification can be done in other ways.


-- 
Regards,
Nishanth Menon