[U-Boot] [PATCHv4 0/3] drivers/ddr/altera: Add the DDR controller driver for SoCFPGA

[Dinh Nguyen <dinguyen@opensource.altera.com>]

On 07/12/2015 02:50 PM, Marek Vasut wrote:
> On Friday, June 26, 2015 at 10:01:47 PM, Marek Vasut wrote:
>> On Friday, June 26, 2015 at 06:43:13 PM, Marek Vasut wrote:
>>> On Wednesday, June 03, 2015 at 05:52:47 AM,
>>> dinguyen at opensource.altera.com
>>>
>>> wrote:
>>>> From: Dinh Nguyen <dinguyen@opensource.altera.com>
>>>>
>>>> Hi,
>>>>
>>>> This is v4 of the patch series that adds the DDR controller driver for
>>>> Altera's SoCFPGA platform.
>>>>
>>>> v4:
>>>> - Further cleanup by removing comments that do not apply for Cyclone5.
>>>> - Removed more unused functions
>>>>
>>>> Thanks,
>>>
>>> I applied this to u-boot/master and tried building for socfpga_cyclone5,
>>> this is what I'm getting after I fixed these patches to actually apply
>>> to u-boot/master (there was a minor conflict in Makefile):
>>>
>>> drivers/ddr/altera/sdram.c:11:35: fatal error: asm/arch/sdram_config.h:
>>> No such file or directory
>>>
>>>  #include <asm/arch/sdram_config.h>
>>
>> OK, these files were misplaced by the patch. Now I got it to compile, only
>> to see that when I try to init DRAM on sockit using those, PHY calibration
>> fails (run_mem_calibrate() returns 1).
>>
>> btw. I also think sdram_config.h should go into board/altera/ instead .
> 
> Just a quick heads-up, I'm cleaning this and the SPL up. I got SoCkit
> booting from SD/MMC and I'm over 50 patches now. I'll submit them when
> I'm done with this. I'd like to avoid merge conflicts now, so please
> wait for my submission if possible.
> 

So you want me to wait regarding the SDRAM patches?

Dinh