[U-Boot] [PATCH 06/12] usb: USB_MUSB_SUNXI move to musb-new Kconfig

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 22-07-15 10:45, Paul Kocialkowski wrote:
> Now that the musb-new driver has a Kconfig, we can move Kconfig options to
> enable controllers to it, so that it's easier in e.g. menuconfig.
>
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
>   board/sunxi/Kconfig          |  9 ---------
>   drivers/usb/musb-new/Kconfig | 14 ++++++++++++++
>   2 files changed, 14 insertions(+), 9 deletions(-)
>
> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
> index 2a1cd3c..9c25d49 100644
> --- a/board/sunxi/Kconfig
> +++ b/board/sunxi/Kconfig
> @@ -532,15 +532,6 @@ config VIDEO_LCD_TL059WV5C0
>   endchoice
>
>
> -config USB_MUSB_SUNXI
> -	bool "Enable sunxi OTG / DRC USB controller in host mode"
> -	default n
> -	---help---
> -	Say y here to enable support for the sunxi OTG / DRC USB controller
> -	used on almost all sunxi boards. Note currently u-boot can only have
> -	one usb host controller enabled at a time, so enabling this on boards
> -	which also use the ehci host controller will result in build errors.
> -
>   config USB_KEYBOARD
>   	boolean "Enable USB keyboard support"
>   	default y
> diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
> index 34a8474..5be072a 100644
> --- a/drivers/usb/musb-new/Kconfig
> +++ b/drivers/usb/musb-new/Kconfig
> @@ -12,3 +12,17 @@ config USB_MUSB_GADGET
>   	bool "MUSB gadget mode support"
>   	help
>   	  Enables the MUSB USB dual-role controller in gadget mode.
> +
> +if USB_MUSB_HOST || USB_MUSB_GADGET
> +
> +config USB_MUSB_SUNXI
> +	bool "Enable sunxi OTG / DRC USB controller"
> +	depends on ARCH_SUNXI
> +	default n
> +	---help---
> +	Say y here to enable support for the sunxi OTG / DRC USB controller
> +	used on almost all sunxi boards. Note currently u-boot can only have
> +	one usb host controller enabled at a time, so enabling this on boards
> +	which also use the ehci host controller will result in build errors.
> +
> +endif
>

AFAICT this will break MUSB host usage on current sunxi boards, since their
defconfig-s contain CONFIG_USB_MUSB_SUNXI=y but not CONFIG_USB_MUSB_HOST=y
please update all sunxi defconfigs which have CONFIG_USB_MUSB_SUNXI=y to also
set CONFIG_USB_MUSB_HOST=y in this patch to avoid this breakage.

Note all earlier patches in this series look good to me and are:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans