From: Murali Karicheri <m-karicheri2@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 4/8] configs: ti_armv7_keystone2: start using armv7_common
Date: Wed, 22 Jul 2015 11:19:29 -0400 [thread overview]
Message-ID: <55AFB481.2020806@ti.com> (raw)
In-Reply-To: <1437237636-8946-5-git-send-email-nm@ti.com>
On 07/18/2015 12:40 PM, Nishanth Menon wrote:
> Try to maintain as much commonality by conditionally including stuff
> in armv7_common as necessary and removing the common defines from
> keystone2 header.
>
> /* U-Boot Build Configuration */
> #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
> -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
> -#define CONFIG_SYS_CONSOLE_INFO_QUIET
> #define CONFIG_BOARD_EARLY_INIT_F
> -#define CONFIG_SYS_THUMB_BUILD
One thing I see is THUMB build is only enabled for SPL build in
ti_armv7_common.h. With this transition, regular build will not be using
THUMB build anymore. This is not right. Please fix it. Many platforms
configs such as tbs2910.h, colibri_vf.h, highbank.h etc has this enabled
for both builds as this will reduce the image size.
>
> /* SoC Configuration */
--
Murali Karicheri
Linux Kernel, Keystone
next prev parent reply other threads:[~2015-07-22 15:19 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-18 16:40 [U-Boot] [PATCH V3 0/8] configs: make keystone2 config to start using arm_v7_common header Nishanth Menon
2015-07-18 16:40 ` [U-Boot] [PATCH V3 1/8] configs: split ti_armv7_common into a omap generic header Nishanth Menon
2015-07-22 15:35 ` Tom Rini
2015-07-18 16:40 ` [U-Boot] [PATCH V3 2/8] board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDR Nishanth Menon
2015-07-22 15:35 ` Tom Rini
2015-07-18 16:40 ` [U-Boot] [PATCH V3 3/8] configs: rename ks2_evm into ti_armv7_keystone2 Nishanth Menon
2015-07-22 15:23 ` Murali Karicheri
2015-07-22 15:24 ` Murali Karicheri
2015-07-22 15:35 ` Tom Rini
2015-07-18 16:40 ` [U-Boot] [PATCH V3 4/8] configs: ti_armv7_keystone2: start using armv7_common Nishanth Menon
2015-07-22 15:19 ` Murali Karicheri [this message]
2015-07-22 15:28 ` Tom Rini
2015-07-18 16:40 ` [U-Boot] [PATCH V3 5/8] configs: ti_armv7_keystone2: switch addresses to generic addresses Nishanth Menon
2015-07-22 15:22 ` Murali Karicheri
2015-07-22 15:35 ` Tom Rini
2015-07-18 16:40 ` [U-Boot] [PATCH V3 6/8] ti_armv7_keystone2: switch to using kernel zImage Nishanth Menon
2015-07-22 15:21 ` Murali Karicheri
2015-07-22 15:35 ` Tom Rini
2015-07-18 16:40 ` [U-Boot] [PATCH V3 7/8] configs: k2*_evm: rename skernel binary names to generated file names Nishanth Menon
2015-07-22 15:21 ` Murali Karicheri
2015-07-22 15:35 ` Tom Rini
2015-07-18 16:40 ` [U-Boot] [PATCH V3 8/8] configs: keystone2: remove distro specific ramdisk name Nishanth Menon
2015-07-22 15:20 ` Murali Karicheri
2015-07-22 15:32 ` Tom Rini
2015-07-22 15:33 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55AFB481.2020806@ti.com \
--to=m-karicheri2@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox