[U-Boot] [PATCH V3 5/8] configs: ti_armv7_keystone2: switch addresses to generic addresses

Murali Karicheri
2015-07-22T15:22:53Z

On 07/18/2015 12:40 PM, Nishanth Menon wrote:
> Use the defaults defined in DEFAULT_LINUX_BOOT_ENV
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> new patch based on review comments on https://patchwork.ozlabs.org/patch/496823/
>
> include/configs/ti_armv7_keystone2.h | 22 +++++++++-------------
> 1 file changed, 9 insertions(+), 13 deletions(-)
>
> diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
> index 0e67cf0ebd75..ddc2e23f1370 100644
> --- a/include/configs/ti_armv7_keystone2.h
> +++ b/include/configs/ti_armv7_keystone2.h
> @@ -212,30 +212,26 @@
>
> #define CONFIG_BOOTFILE "uImage"
> #define CONFIG_EXTRA_ENV_SETTINGS \
> + DEFAULT_LINUX_BOOT_ENV \
> CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
> "boot=ubi\0" \
> "tftp_root=/\0" \
> "nfs_root=/export\0" \
> "mem_lpae=1\0" \
> "mem_reserve=512M\0" \
> - "addr_fdt=0x87000000\0" \
> - "addr_kern=0x88000000\0" \
> - "addr_uboot=0x87000000\0" \
> - "addr_fs=0x82000000\0" \
> "addr_ubi=0x82000000\0" \
> "addr_secdb_key=0xc000000\0" \
> - "fdt_high=0xffffffff\0" \
> "name_kern=uImage-keystone-evm.bin\0" \
> "run_mon=mon_install ${addr_mon}\0" \
> - "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
> + "run_kern=bootm ${loadaddr} - ${fdtaddr}\0" \
> "init_net=run args_all args_net\0" \
> "init_ubi=run args_all args_ubi; " \
> "ubi part ubifs; ubifsmount ubi:boot;" \
> "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \
> - "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
> - "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
> - "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
> - "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
> + "get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0" \
> + "get_fdt_ubi=ubifsload ${fdtaddr} ${name_fdt}\0" \
> + "get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0" \
> + "get_kern_ubi=ubifsload ${loadaddr} ${name_kern}\0" \
> "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
> "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
> "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
> @@ -248,10 +244,10 @@
> "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
> "${nfs_options} ip=dhcp\0" \
> "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \
> - "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
> - "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
> + "get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0" \
> + "get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0" \
> "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
> - "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \
> + "get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \
> "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
> "burn_ubi=nand erase.part ubifs; " \
> "nand write ${addr_ubi} ubifs ${filesize}\0" \
>
Reviewed-by: Murali Karicheri <m-karicheri2@ti.com>

--
Murali Karicheri
Linux Kernel, Keystone