[U-Boot] [PATCH V3 5/8] configs: ti_armv7_keystone2: switch addresses to generic addresses

[Murali Karicheri <m-karicheri2@ti.com>]

On 07/18/2015 12:40 PM, Nishanth Menon wrote:
> Use the defaults defined in DEFAULT_LINUX_BOOT_ENV
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> new patch based on review comments on https://patchwork.ozlabs.org/patch/496823/
>
>   include/configs/ti_armv7_keystone2.h | 22 +++++++++-------------
>   1 file changed, 9 insertions(+), 13 deletions(-)
>
> diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
> index 0e67cf0ebd75..ddc2e23f1370 100644
> --- a/include/configs/ti_armv7_keystone2.h
> +++ b/include/configs/ti_armv7_keystone2.h
> @@ -212,30 +212,26 @@
>
>   #define CONFIG_BOOTFILE			"uImage"
>   #define CONFIG_EXTRA_ENV_SETTINGS					\
> +	DEFAULT_LINUX_BOOT_ENV						\
>   	CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
>   	"boot=ubi\0"							\
>   	"tftp_root=/\0"							\
>   	"nfs_root=/export\0"						\
>   	"mem_lpae=1\0"							\
>   	"mem_reserve=512M\0"						\
> -	"addr_fdt=0x87000000\0"						\
> -	"addr_kern=0x88000000\0"					\
> -	"addr_uboot=0x87000000\0"					\
> -	"addr_fs=0x82000000\0"						\
>   	"addr_ubi=0x82000000\0"						\
>   	"addr_secdb_key=0xc000000\0"					\
> -	"fdt_high=0xffffffff\0"						\
>   	"name_kern=uImage-keystone-evm.bin\0"				\
>   	"run_mon=mon_install ${addr_mon}\0"				\
> -	"run_kern=bootm ${addr_kern} - ${addr_fdt}\0"			\
> +	"run_kern=bootm ${loadaddr} - ${fdtaddr}\0"			\
>   	"init_net=run args_all args_net\0"				\
>   	"init_ubi=run args_all args_ubi; "				\
>   		"ubi part ubifs; ubifsmount ubi:boot;"			\
>   		"ubifsload ${addr_secdb_key} securedb.key.bin;\0"       \
> -	"get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"	\
> -	"get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0"		\
> -	"get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0"	\
> -	"get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0"		\
> +	"get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"	\
> +	"get_fdt_ubi=ubifsload ${fdtaddr} ${name_fdt}\0"		\
> +	"get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"	\
> +	"get_kern_ubi=ubifsload ${loadaddr} ${name_kern}\0"		\
>   	"get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"	\
>   	"get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0"		\
>   	"get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0"	\
> @@ -248,10 +244,10 @@
>   		"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"	\
>   		"${nfs_options} ip=dhcp\0"				\
>   	"nfs_options=v3,tcp,rsize=4096,wsize=4096\0"			\
> -	"get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0"	\
> -	"get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0"	\
> +	"get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"	\
> +	"get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"	\
>   	"get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"	\
> -	"get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0"	\
> +	"get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0"	\
>   	"get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"	\
>   	"burn_ubi=nand erase.part ubifs; "				\
>   		"nand write ${addr_ubi} ubifs ${filesize}\0"		\
>
Reviewed-by: Murali Karicheri <m-karicheri2@ti.com>

-- 
Murali Karicheri
Linux Kernel, Keystone