From mboxrd@z Thu Jan  1 00:00:00 1970
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Sun, 26 Jul 2015 20:29:49 +0300
Subject: [U-Boot] [PATCH 05/12] arm: mx6: cm-fx6: move CMD configs to
	defconfig
In-Reply-To: <1437661179-32128-6-git-send-email-nikita@compulab.co.il>
References: <1437661179-32128-1-git-send-email-nikita@compulab.co.il>
 <1437661179-32128-6-git-send-email-nikita@compulab.co.il>
Message-ID: <55B5190D.8050507@compulab.co.il>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 07/23/15 17:19, Nikita Kiryanov wrote:
> Move CONFIG_CMD_* options that can be selected in menuconfig to cm-fx6
> defconfig.
> 
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Igor Grinberg <grinberg@compulab.co.il>
> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>

> ---
>  configs/cm_fx6_defconfig | 5 +++++
>  include/configs/cm_fx6.h | 3 ---
>  2 files changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
> index 6be5c17..25829db 100644
> --- a/configs/cm_fx6_defconfig
> +++ b/configs/cm_fx6_defconfig
> @@ -9,4 +9,9 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
>  # CONFIG_CMD_FLASH is not set
>  # CONFIG_CMD_FPGA is not set
>  # CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_PING=y
>  CONFIG_SPI_FLASH=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
> index f23ef8b..9b00c0d 100644
> --- a/include/configs/cm_fx6.h
> +++ b/include/configs/cm_fx6.h
> @@ -50,7 +50,6 @@
>  					sizeof(CONFIG_SYS_PROMPT) + 16)
>  
>  /* SPI flash */
> -#define CONFIG_CMD_SF
>  #define CONFIG_SF_DEFAULT_BUS		0
>  #define CONFIG_SF_DEFAULT_CS		0
>  #define CONFIG_SF_DEFAULT_SPEED		25000000
> @@ -199,7 +198,6 @@
>  #define CONFIG_NET_RETRY_COUNT		5
>  
>  /* USB */
> -#define CONFIG_CMD_USB
>  #define CONFIG_USB_EHCI
>  #define CONFIG_USB_EHCI_MX6
>  #define CONFIG_USB_STORAGE
> @@ -212,7 +210,6 @@
>  #define CONFIG_SYS_STDIO_DEREGISTER
>  
>  /* I2C */
> -#define CONFIG_CMD_I2C
>  #define CONFIG_SYS_I2C
>  #define CONFIG_SYS_I2C_MXC
>  #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
> 

-- 
Regards,
Igor.