From mboxrd@z Thu Jan  1 00:00:00 1970
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Sun, 26 Jul 2015 20:31:01 +0300
Subject: [U-Boot] [PATCH 06/12] arm: mx6: cm-fx6: move cm-fx6 target
	under ARCH_MX6
In-Reply-To: <1437661179-32128-7-git-send-email-nikita@compulab.co.il>
References: <1437661179-32128-1-git-send-email-nikita@compulab.co.il>
 <1437661179-32128-7-git-send-email-nikita@compulab.co.il>
Message-ID: <55B51955.2070801@compulab.co.il>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 07/23/15 17:19, Nikita Kiryanov wrote:
> cm-fx6 is an MX6 based board, and the menuconfig hierarchy should
> reflect that. Make TARGET_CM_FX6 dependant on ARCH_MX6.
> 
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Igor Grinberg <grinberg@compulab.co.il>
> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>

Seems reasonable.
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

> ---
>  arch/arm/Kconfig               | 8 --------
>  arch/arm/cpu/armv7/mx6/Kconfig | 8 ++++++++
>  configs/cm_fx6_defconfig       | 1 +
>  3 files changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 506463c..fc8c435 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -625,14 +625,6 @@ config RMOBILE
>  	bool "Renesas ARM SoCs"
>  	select CPU_V7
>  
> -config TARGET_CM_FX6
> -	bool "Support cm_fx6"
> -	select CPU_V7
> -	select SUPPORT_SPL
> -	select DM
> -	select DM_SERIAL
> -	select DM_GPIO
> -
>  config ARCH_SOCFPGA
>  	bool "Altera SOCFPGA family"
>  	select CPU_V7
> diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
> index 10908c4..2c18bcd 100644
> --- a/arch/arm/cpu/armv7/mx6/Kconfig
> +++ b/arch/arm/cpu/armv7/mx6/Kconfig
> @@ -29,6 +29,14 @@ choice
>  	prompt "MX6 board select"
>  	optional
>  
> +config TARGET_CM_FX6
> +	bool "Support CM-FX6"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +	select DM
> +	select DM_SERIAL
> +	select DM_GPIO
> +
>  config TARGET_SECOMX6
>  	bool "Support secomx6 boards"
>  	select CPU_V7
> diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
> index 25829db..7ad5c21 100644
> --- a/configs/cm_fx6_defconfig
> +++ b/configs/cm_fx6_defconfig
> @@ -1,4 +1,5 @@
>  CONFIG_ARM=y
> +CONFIG_ARCH_MX6=y
>  CONFIG_TARGET_CM_FX6=y
>  CONFIG_SPL=y
>  CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
> 

-- 
Regards,
Igor.