From: Nikolay Dimitrov <picmaster@mail.bg>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 06/13][v4] imx: system counter driver for imx7d and mx6ul
Date: Fri, 31 Jul 2015 15:41:24 +0300 [thread overview]
Message-ID: <55BB6CF4.3040304@mail.bg> (raw)
In-Reply-To: <1438295726-2156-6-git-send-email-aalonso@freescale.com>
Hi Adrian,
On 07/31/2015 01:35 AM, Adrian Alonso wrote:
> * The system counter driver for imx7d abd mx6ul, move
> this timer driver to imx-common and rename it as syscounter.c
>
> For mx6ul and mx7, configurations are used for choose the GPT timer
> or system counter timer (default).
>
> GPT timer: CONFIG_GPT_TIMER
> System counter timer: CONFIG_SYSCOUNTER_TIMER
>
> For mx6dqp GPT timer is the default setting.
>
> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
> Signed-off-by: Ye.Li <B37916@freescale.com>
> ---
> Changes for V2: Resend
> Changes for V3: Resend
> Changes for V4: Resend
>
> arch/arm/imx-common/syscounter.c | 126 +++++++++++++++++++++++++++
> arch/arm/include/asm/imx-common/syscounter.h | 29 ++++++
> include/configs/mx6_common.h | 1 +
> 3 files changed, 156 insertions(+)
> create mode 100644 arch/arm/imx-common/syscounter.c
> create mode 100644 arch/arm/include/asm/imx-common/syscounter.h
>
> diff --git a/arch/arm/imx-common/syscounter.c b/arch/arm/imx-common/syscounter.c
> new file mode 100644
> index 0000000..f5e5cdc
> --- /dev/null
> +++ b/arch/arm/imx-common/syscounter.c
> @@ -0,0 +1,126 @@
> +/*
> + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
Don't want to play "license police", but the file is created in 2015,
and the copyright says 2014-2015. Can you please check this out? Thanks.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + *
> + * The file use ls102xa/timer.c as a reference.
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <div64.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/imx-common/syscounter.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * This function is intended for SHORT delays only.
> + * It will overflow at around 10 seconds @ 400MHz,
> + * or 20 seconds @ 200MHz.
> + */
> +unsigned long usec2ticks(unsigned long usec)
> +{
> + ulong ticks;
> +
> + if (usec < 1000)
> + ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
> + else
> + ticks = ((usec / 10) * (get_tbclk() / 100000));
> +
> + return ticks;
> +}
> +
> +static inline unsigned long long tick_to_time(unsigned long long tick)
> +{
> + unsigned long freq;
> +
> + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
> +
> + tick *= CONFIG_SYS_HZ;
> + do_div(tick, freq);
> +
> + return tick;
> +}
> +
> +static inline unsigned long long us_to_tick(unsigned long long usec)
> +{
> + unsigned long freq;
> +
> + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
> +
> + usec = usec * freq + 999999;
> + do_div(usec, 1000000);
> +
> + return usec;
> +}
> +
> +int timer_init(void)
> +{
> + struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
> + unsigned long val, freq;
> +
> + freq = CONFIG_SC_TIMER_CLK;
> + asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
> +
> + writel(freq, &sctr->cntfid0);
> +
> + /* Enable system counter */
> + val = readl(&sctr->cntcr);
> + val &= ~(SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1);
> + val |= SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG;
> + writel(val, &sctr->cntcr);
> +
> + gd->arch.tbl = 0;
> + gd->arch.tbu = 0;
> +
> + return 0;
> +}
> +
> +unsigned long long get_ticks(void)
> +{
> + unsigned long long now;
> +
> + asm("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now));
> +
> + gd->arch.tbl = (unsigned long)(now & 0xffffffff);
> + gd->arch.tbu = (unsigned long)(now >> 32);
> +
> + return now;
> +}
> +
> +ulong get_timer_masked(void)
> +{
> + return tick_to_time(get_ticks());
> +}
> +
> +ulong get_timer(ulong base)
> +{
> + return get_timer_masked() - base;
> +}
> +
> +void __udelay(unsigned long usec)
> +{
> + unsigned long long tmp;
> + ulong tmo;
> +
> + tmo = us_to_tick(usec);
> + tmp = get_ticks() + tmo; /* get current timestamp */
> +
> + while (get_ticks() < tmp) /* loop till event */
> + /*NOP*/;
> +}
> +
> +/*
> + * This function is derived from PowerPC code (timebase clock frequency).
> + * On ARM it returns the number of timer ticks per second.
> + */
> +ulong get_tbclk(void)
> +{
> + unsigned long freq;
> +
> + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
> +
> + return freq;
> +}
> diff --git a/arch/arm/include/asm/imx-common/syscounter.h b/arch/arm/include/asm/imx-common/syscounter.h
> new file mode 100644
> index 0000000..ddb412e
> --- /dev/null
> +++ b/arch/arm/include/asm/imx-common/syscounter.h
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
Same here.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _ASM_ARCH_SYSTEM_COUNTER_H
> +#define _ASM_ARCH_SYSTEM_COUNTER_H
> +
> +/* System Counter */
> +struct sctr_regs {
> + u32 cntcr;
> + u32 cntsr;
> + u32 cntcv1;
> + u32 cntcv2;
> + u32 resv1[4];
> + u32 cntfid0;
> + u32 cntfid1;
> + u32 cntfid2;
> + u32 resv2[1001];
> + u32 counterid[1];
> +};
> +
> +#define SC_CNTCR_ENABLE (1 << 0)
> +#define SC_CNTCR_HDBG (1 << 1)
> +#define SC_CNTCR_FREQ0 (1 << 8)
> +#define SC_CNTCR_FREQ1 (1 << 9)
> +
> +#endif
> diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
> index 54ab890..ed9f8fe 100644
> --- a/include/configs/mx6_common.h
> +++ b/include/configs/mx6_common.h
> @@ -30,6 +30,7 @@
>
> #define CONFIG_MP
> #define CONFIG_MXC_GPT_HCLK
> +#define CONFIG_GPT_TIMER
>
> #define CONFIG_SYS_NO_FLASH
>
>
Kind regards,
Nikolay
next prev parent reply other threads:[~2015-07-31 12:41 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-30 22:35 [U-Boot] [PATCH 01/13][v4] power: pmic: add pfuze3000 support Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 02/13][v4] imx: iomux-v3: add imx7d support for iomuxc Adrian Alonso
2015-08-02 9:40 ` Stefano Babic
2015-08-02 15:48 ` Fabio Estevam
2015-08-03 6:54 ` Stefano Babic
2015-07-30 22:35 ` [U-Boot] [PATCH 03/13][v4] imx: mxc_gpio: add support for imx7d SoC Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 04/13][v4] imx: ocotp: mxc add i.MX7D support Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 05/13][v4] imx: mx7 dm thermal driver support Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 06/13][v4] imx: system counter driver for imx7d and mx6ul Adrian Alonso
2015-07-31 12:41 ` Nikolay Dimitrov [this message]
2015-08-03 20:50 ` Alonso Adrian
2015-07-30 22:35 ` [U-Boot] [PATCH 07/13][v4] imx: imx7d: initial arch level support Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 08/13][v4] imx: imx7d: clock control module support Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 09/13][v4] imx: imx7d: Add SoC system support Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 10/13][v4] imx: imx7d: add hab secure boot support Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 11/13][v4] imx: imx7d: add timer support for imx7d Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 12/13][v4] imx: imx7d: add imx-common cpu " Adrian Alonso
2015-07-30 22:35 ` [U-Boot] [PATCH 13/13][v4] imx: mx7dsabresd: Add support for MX7D SABRESD board Adrian Alonso
2015-08-02 9:31 ` [U-Boot] [PATCH 01/13][v4] power: pmic: add pfuze3000 support Stefano Babic
2015-08-06 8:22 ` Przemyslaw Marczak
2015-08-06 7:47 ` Peng Fan
2015-08-06 10:01 ` Przemyslaw Marczak
2015-08-06 10:09 ` Przemyslaw Marczak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55BB6CF4.3040304@mail.bg \
--to=picmaster@mail.bg \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox