public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 04/15] imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL
Date: Sun, 02 Aug 2015 11:15:56 +0200	[thread overview]
Message-ID: <55BDDFCC.9070508@denx.de> (raw)
In-Reply-To: <1437391715-1344-5-git-send-email-Peng.Fan@freescale.com>

On 20/07/2015 13:28, Peng Fan wrote:
> Since i.MX6UL's cache line size is 64bytes, need to
> define the macro CONFIG_SYS_CACHELINE_SIZE to 64 for i.MX6UL.
> 
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
> 
> Changes v3:
>  none
> Changes v2:
>  new patch, splitted from patch 03/15.
> 
>  arch/arm/include/asm/arch-mx6/imx-regs.h | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index d8b5d6f..4d84a9b 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -9,7 +9,11 @@
>  
>  #define ARCH_MXC
>  
> +#ifdef CONFIG_MX6UL
> +#define CONFIG_SYS_CACHELINE_SIZE	64
> +#else
>  #define CONFIG_SYS_CACHELINE_SIZE	32
> +#endif
>  
>  #define ROMCP_ARB_BASE_ADDR             0x00000000
>  #define ROMCP_ARB_END_ADDR              0x000FFFFF
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

  reply	other threads:[~2015-08-02  9:15 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-20 11:28 [U-Boot] [PATCH v3 00/15] imx: Add i.MX6UL and basic board support Peng Fan
2015-07-20 11:28 ` [U-Boot] [PATCH v3 01/15] imx: mx6ul: Add i.MX6UL CPU type Peng Fan
2015-08-02  9:05   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 02/15] imx: mx6ul: Add pins IOMUX head file Peng Fan
2015-08-02  9:06   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 03/15] imx: mx6ul: Update imx registers " Peng Fan
2015-07-20 18:39   ` Marek Vasut
2015-08-02  9:07     ` Stefano Babic
2015-08-02  9:15   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 04/15] imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL Peng Fan
2015-08-02  9:15   ` Stefano Babic [this message]
2015-07-20 11:28 ` [U-Boot] [PATCH v3 05/15] imx-common: timer: add i.MX6UL support Peng Fan
2015-08-02  9:16   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 06/15] imx: mx6ul remove errata for i.MX6UL Peng Fan
2015-08-02  9:16   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 07/15] imx:mx6ul add clock support Peng Fan
2015-08-02  9:17   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 08/15] imx: mx6ul select SYS_L2CACHE_OFF Peng Fan
2015-08-02  9:17   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 09/15] imx: mx6ul update soc related settings Peng Fan
2015-08-02  9:17   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 10/15] imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL Peng Fan
2015-08-02  9:17   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 11/15] mxc: gpio add i.MX6UL support Peng Fan
2015-08-02  9:17   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 12/15] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL Peng Fan
2015-08-02  9:17   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 13/15] imx:mx6ul add dram spl configuration and header file Peng Fan
2015-08-02  9:18   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 14/15] imx: imx6_spl add mx6ul support Peng Fan
2015-08-02  9:18   ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 15/15] imx: mx6ul_14x14_evk add basic board support Peng Fan
2015-08-02  9:18   ` Stefano Babic
2015-08-10 16:22   ` Fabio Estevam
2015-08-11  0:13     ` Peng Fan
2015-08-11 10:31       ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55BDDFCC.9070508@denx.de \
    --to=sbabic@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox