From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 08/15] imx: mx6ul select SYS_L2CACHE_OFF
Date: Sun, 02 Aug 2015 11:17:14 +0200 [thread overview]
Message-ID: <55BDE01A.9050104@denx.de> (raw)
In-Reply-To: <1437391715-1344-9-git-send-email-Peng.Fan@freescale.com>
On 20/07/2015 13:28, Peng Fan wrote:
> i.MX6UL features an Cortex-A7 core, it does not have PL310 as other i.MX6
> chips. To Cortex-A7 core, If D-Cache is enabled, L2 Cache is enabled.
> There is on specific switch for on/off L2 Cache, so default select
> SYS_L2CACHE_OFF.
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
>
> Changes v3:
> none
>
> Changes v2:
> refine commit msg.
>
> arch/arm/cpu/armv7/mx6/Kconfig | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
> index 10908c4..fceba27 100644
> --- a/arch/arm/cpu/armv7/mx6/Kconfig
> +++ b/arch/arm/cpu/armv7/mx6/Kconfig
> @@ -25,6 +25,10 @@ config MX6SL
> config MX6SX
> bool
>
> +config MX6UL
> + select SYS_L2CACHE_OFF
> + bool
> +
> choice
> prompt "MX6 board select"
> optional
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2015-08-02 9:17 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-20 11:28 [U-Boot] [PATCH v3 00/15] imx: Add i.MX6UL and basic board support Peng Fan
2015-07-20 11:28 ` [U-Boot] [PATCH v3 01/15] imx: mx6ul: Add i.MX6UL CPU type Peng Fan
2015-08-02 9:05 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 02/15] imx: mx6ul: Add pins IOMUX head file Peng Fan
2015-08-02 9:06 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 03/15] imx: mx6ul: Update imx registers " Peng Fan
2015-07-20 18:39 ` Marek Vasut
2015-08-02 9:07 ` Stefano Babic
2015-08-02 9:15 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 04/15] imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL Peng Fan
2015-08-02 9:15 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 05/15] imx-common: timer: add i.MX6UL support Peng Fan
2015-08-02 9:16 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 06/15] imx: mx6ul remove errata for i.MX6UL Peng Fan
2015-08-02 9:16 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 07/15] imx:mx6ul add clock support Peng Fan
2015-08-02 9:17 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 08/15] imx: mx6ul select SYS_L2CACHE_OFF Peng Fan
2015-08-02 9:17 ` Stefano Babic [this message]
2015-07-20 11:28 ` [U-Boot] [PATCH v3 09/15] imx: mx6ul update soc related settings Peng Fan
2015-08-02 9:17 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 10/15] imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL Peng Fan
2015-08-02 9:17 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 11/15] mxc: gpio add i.MX6UL support Peng Fan
2015-08-02 9:17 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 12/15] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL Peng Fan
2015-08-02 9:17 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 13/15] imx:mx6ul add dram spl configuration and header file Peng Fan
2015-08-02 9:18 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 14/15] imx: imx6_spl add mx6ul support Peng Fan
2015-08-02 9:18 ` Stefano Babic
2015-07-20 11:28 ` [U-Boot] [PATCH v3 15/15] imx: mx6ul_14x14_evk add basic board support Peng Fan
2015-08-02 9:18 ` Stefano Babic
2015-08-10 16:22 ` Fabio Estevam
2015-08-11 0:13 ` Peng Fan
2015-08-11 10:31 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55BDE01A.9050104@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox