[U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL

[Nikolay Dimitrov <picmaster@mail.bg>]

Hi Peng,

On 08/03/2015 01:06 PM, Peng Fan wrote:
> The MIB RAM and FIFO receive start register does not exist on
> i.MX6UL. Accessing these register will cause enet not work well.
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> Signed-off-by: Fugang Duan <B38611@freescale.com>
> Cc: Joe Hershberger <joe.hershberger@ni.com>
> ---
>   drivers/net/fec_mxc.c | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index c5dcbbb..7fb1d5f 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -520,8 +520,10 @@ static int fec_open(struct eth_device *edev)
>   static int fec_init(struct eth_device *dev, bd_t* bd)
>   {
>   	struct fec_priv *fec = (struct fec_priv *)dev->priv;
> +#if !defined(CONFIG_MX6UL)
>   	uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
>   	int i;
> +#endif
>
>   	/* Initialize MAC address */
>   	fec_set_hwaddr(dev);
> @@ -551,12 +553,14 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
>   	writel(0x00000000, &fec->eth->gaddr2);
>
>
> +#if !defined(CONFIG_MX6UL)
>   	/* clear MIB RAM */
>   	for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
>   		writel(0, i);
>
>   	/* FIFO receive start register */
>   	writel(0x520, &fec->eth->r_fstart);
> +#endif
>
>   	/* size and address of each buffer */
>   	writel(FEC_MAX_PKT_SIZE, &fec->eth->emrbr);
>

Is it possible to do runtime check for the SoC type, instead of ifdefs?

Regards,
Nikolay