[U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file

[Soeren Moch <smoch@web.de>]

On 08/06/15 07:43, Peng Fan wrote:
> Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig.
> Add enable "CONFIG_ARCH_MX6" for boards based on mx6.
> Then we can choose target boards using "make ARCH=arm menuconfig"
> with ARCH_MX6 defined.
>
> If using original way, we have no chance to enable ARCH_MX6 when
> "make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig,
> kconfig will complains "arch/../configs/platinum_titanium_defconfig:3:
> warning: override: TARGET_PLATINUM_TITANIUM changes choice state"
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Tim Harvey <tharvey@gateworks.com>
> Cc: Eric B?nard <eric@eukrea.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Eric Nelson <eric.nelson@boundarydevices.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Soeren Moch <smoch@web.de>
> Cc: Otavio Salvador <otavio@ossystems.com.br>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
[...]
> index dce7ffc..b7481e7 100644
> --- a/arch/arm/cpu/armv7/mx6/Kconfig
> +++ b/arch/arm/cpu/armv7/mx6/Kconfig
> @@ -46,6 +46,113 @@ config TARGET_SECOMX6
>   config TARGET_TQMA6
>   	bool "TQ Systems TQMa6 board"
>
> +config TARGET_UDOO
> +	bool "Support udoo"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +
> +config TARGET_OT1200
> +	bool "Bachmann OT1200"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +
> +config TARGET_WANDBOARD
> +	bool "Support wandboard"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +
> +config TARGET_WARP
> +	bool "Support WaRP"
> +	select CPU_V7
> +
> +config TARGET_MX6CUBOXI
> +	bool "Support Solid-run mx6 boards"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +
> +config TARGET_MX6SLEVK
> +	bool "Support mx6slevk"
> +	select CPU_V7
> +
> +config TARGET_MX6SXSABRESD
> +	bool "Support mx6sxsabresd"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +	select DM
> +	select DM_THERMAL
> +
> +config TARGET_MX6UL_14X14_EVK
> +	bool "Support mx6ul_14x14_evk"
> +	select CPU_V7
> +	select DM
> +	select DM_THERMAL
> +	select SUPPORT_SPL
> +
> +config TARGET_MX6QARM2
> +	bool "Support mx6qarm2"
> +	select CPU_V7
> +
> +config TARGET_MX6QSABREAUTO
> +	bool "Support mx6qsabreauto"
> +	select CPU_V7
> +	select DM
> +	select DM_THERMAL
> +
> +config TARGET_MX6SABRESD
> +	bool "Support mx6sabresd"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +	select DM
> +	select DM_THERMAL
> +
> +config TARGET_GW_VENTANA
> +	bool "Support gw_ventana"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +
> +config TARGET_TITANIUM
> +	bool "Support titanium"
> +	select CPU_V7
> +
> +config TARGET_NITROGEN6X
> +	bool "Support nitrogen6x"
> +	select CPU_V7
> +
> +config TARGET_CGTQMX6EVAL
> +	bool "Support cgtqmx6eval"
> +	select CPU_V7
> +
> +config TARGET_EMBESTMX6BOARDS
> +	bool "Support embestmx6boards"
> +	select CPU_V7
> +
> +config TARGET_ARISTAINETOS
> +	bool "Support aristainetos"
> +	select CPU_V7
> +
> +config TARGET_ARISTAINETOS2
> +	bool "Support aristainetos2"
> +	select CPU_V7
> +
> +config TARGET_KOSAGI_NOVENA
> +	bool "Support Kosagi Novena"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +
> +config TARGET_TBS2910
> +	bool "Support tbs2910"
> +	select CPU_V7
> +
> +config TARGET_PLATINUM_PICON
> +	bool "Support platinum-picon"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +
> +config TARGET_PLATINUM_TITANIUM
> +	bool "Support platinum-titanium"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +
>   endchoice
>
>   config SYS_SOC
> @@ -53,5 +160,26 @@ config SYS_SOC
>
>   source "board/seco/Kconfig"
>   source "board/tqc/tqma6/Kconfig"
> +source "board/udoo/Kconfig"
> +source "board/bachmann/ot1200/Kconfig"
> +source "board/wandboard/Kconfig"
> +source "board/warp/Kconfig"
> +source "board/compulab/cm_fx6/Kconfig"
> +source "board/solidrun/mx6cuboxi/Kconfig"
> +source "board/freescale/mx6qarm2/Kconfig"
> +source "board/freescale/mx6qsabreauto/Kconfig"
> +source "board/freescale/mx6sabresd/Kconfig"
> +source "board/freescale/mx6slevk/Kconfig"
> +source "board/freescale/mx6sxsabresd/Kconfig"
> +source "board/freescale/mx6ul_14x14_evk/Kconfig"
> +source "board/gateworks/gw_ventana/Kconfig"
> +source "board/barco/platinum/Kconfig"
> +source "board/barco/titanium/Kconfig"
> +source "board/boundary/nitrogen6x/Kconfig"
> +source "board/congatec/cgtqmx6eval/Kconfig"
> +source "board/embest/mx6boards/Kconfig"
> +source "board/aristainetos/Kconfig"
> +source "board/kosagi/novena/Kconfig"
> +source "board/tbs/tbs2910/Kconfig"
>
>   endif
[...]


I would suggest to sort the config options and include files alphabetically.
Also I think we don't need "Support" in the board select options, unfortunately this
is already not consistent in arch/arm/cpu/armv7/mx6/Kconfig .

Besides that:
Acked-by: Soeren Moch <smoch@web.de>

Regards,
Soeren