From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Fri, 7 Aug 2015 16:12:57 -0700 Subject: [U-Boot] u-boot FIT image support In-Reply-To: References: <55C519AA.2030209@freescale.com> Message-ID: <55C53B79.603@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08/07/2015 03:47 PM, Simon Glass wrote: > Hi York, > > On 7 August 2015 at 14:48, York Sun wrote: >> >> Simon, >> >> I was doing an experiment to put the load address and entry address of Linux to >> higher than 32-bit address. I found it is broken to process more than 32-bit >> addresses. When I attempted to fix it, I was troubled by those code used for >> both host and target, like common/image-fit.c. For example, to process 64-bit >> address, the function >> >> int fit_image_get_load(const void *fit, int noffset, ulong *load) >> >> should be converted to >> >> int fit_image_get_load(const void *fit, int noffset, uint64_t *load) >> >> ulong is 64-bit for 64-bit target such as ARMv8, but it can be 32-bit on host. >> If I use uint64_t, all related code in bootm and others need to change. Before I >> go too far, I'd like to check if anyone has tried to enable this in FIT image. >> >> #address-cells = <2>; >> >> I can try to use uint64_t in place of ulong for all related code if that's >> right. That will be a lot of change. > > Perhaps I misunderstand something, but I think ulong should be OK on > the host. I just needs to hold a machine address. On a 32-bit host > this cannot be 64-bit. Can you explain the problem a bit more? > > I have not need #address-cells in a FIT. > > It would be better to use ulong for addresses in U-Boot I think. It is > safe and efficient on both 32- and 64-bit machines. > Simon, Considering this situation, building FIT image on an ubuntu 12.04 32-bit host, for ARMv8 target. I believe ulong is OK on 64-bit target. But it is not for the host mkimage. To proper deal with address cell = 2, the function fit_image_get_load() and fit_image_get_entry() need to make 64-bit address from FIT image. mkimage runs on 32-bit host doesn't take ulong as 64-bit, does it? So I can generate a FIT image with the address cell and load/entry address I need, but I cannot display it correctly with mkimage. I think I can use the image on 64-bit target after fixing some parsing code as I mentioned. The background for this experiment is I am trying to shift DDR to a continuous space. For ARMv8, DDR can have three regions, with only 2GB under 32-bit address space. York