From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address
Date: Fri, 7 Aug 2015 17:30:58 -0700 [thread overview]
Message-ID: <55C54DC2.2070401@freescale.com> (raw)
In-Reply-To: <1437746136-14379-8-git-send-email-codrin.ciubotariu@freescale.com>
On 07/24/2015 06:55 AM, Codrin Ciubotariu wrote:
> The code from common/env_flags.c that checks if a
> string has the format of a MAC address has been moved
> in net/eth.c as a separate function called
> eth_validate_ethaddr_str().
>
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
> ---
>
> Changes for v3:
> - none, new patch;
>
> common/env_flags.c | 15 ++-------------
> include/net.h | 1 +
> net/eth.c | 30 ++++++++++++++++++++++++++++++
> 3 files changed, 33 insertions(+), 13 deletions(-)
>
> diff --git a/common/env_flags.c b/common/env_flags.c
> index 5189f5b..3e39fd1 100644
> --- a/common/env_flags.c
> +++ b/common/env_flags.c
> @@ -239,19 +239,8 @@ static int _env_flags_validate_type(const char *value,
> }
> break;
> case env_flags_vartype_macaddr:
> - cur = value;
> - for (i = 0; i < 6; i++) {
> - skip_num(1, cur, &end, 2);
> - if (cur == end)
> - return -1;
> - if (cur + 2 == end && is_hex_prefix(cur))
> - return -1;
> - if (i != 5 && *end != ':')
> - return -1;
> - if (i == 5 && *end != '\0')
> - return -1;
> - cur = end + 1;
> - }
> + if (eth_validate_ethaddr_str(value))
> + return -1;
> break;
> #endif
> case env_flags_vartype_end:
> diff --git a/include/net.h b/include/net.h
> index d17173d..c487aa7 100644
> --- a/include/net.h
> +++ b/include/net.h
> @@ -218,6 +218,7 @@ void eth_try_another(int first_restart); /* Change the device */
> void eth_set_current(void); /* set nterface to ethcur var */
>
> int eth_get_dev_index(void); /* get the device index */
> +int eth_validate_ethaddr_str(const char *addr);
> void eth_parse_enetaddr(const char *addr, uchar *enetaddr);
> int eth_getenv_enetaddr(char *name, uchar *enetaddr);
> int eth_setenv_enetaddr(char *name, const uchar *enetaddr);
> diff --git a/net/eth.c b/net/eth.c
> index 953b731..a6fdf1b 100644
> --- a/net/eth.c
> +++ b/net/eth.c
> @@ -7,6 +7,7 @@
> */
>
> #include <common.h>
> +#include <linux/ctype.h>
> #include <command.h>
> #include <dm.h>
> #include <environment.h>
> @@ -19,6 +20,35 @@
>
> DECLARE_GLOBAL_DATA_PTR;
>
> +int eth_validate_ethaddr_str(const char *addr)
> +{
> + unsigned long val;
> + int i;
> + const char *cur;
> + char *end;
> +
> + if (!addr)
> + return -1;
> +
> + cur = addr;
> + for (i = 0; i < 6; i++) {
> + val = simple_strtoul(cur, &end, 16);
> + if (cur + 1 != end && cur + 2 != end)
> + return -1;
> + if (val > 0xff)
> + return -1;
> + if (cur + 2 >= end && tolower(*(cur + 1)) == 'x')
> + return -1;
> + if (i != 5 && *end != ':')
> + return -1;
> + if (i == 5 && *end != '\0')
> + return -1;
> + cur = end + 1;
> + }
> +
> + return 0;
> +}
> +
> void eth_parse_enetaddr(const char *addr, uchar *enetaddr)
> {
> char *end;
>
Codrin,
This patch breaks most SPL targets. Please reconsider the location of
eth_validate_ethaddr_str().
York
next prev parent reply other threads:[~2015-08-08 0:30 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 13:55 [U-Boot] [PATCH v3 04/16] drivers/net/vsc9953: Fix missing reserved register Codrin Ciubotariu
2015-07-24 13:55 ` [U-Boot] [PATCH v3 05/16] include/bitfield: Add new bitfield operations Codrin Ciubotariu
2015-08-07 20:17 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 06/16] drivers/net/vsc9953: Add default configuration for VSC9953 L2 Switch Codrin Ciubotariu
2015-08-07 20:17 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 07/16] common/cmd_ethsw: Add generic commands for Ethernet Switches Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-08-07 22:58 ` York Sun
2015-08-10 5:47 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 08/16] drivers/net/vsc9953: Use the generic Ethernet Switch parser Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 09/16] drivers/net/vsc9953: Add command to show/clear port counters Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 10/16] drivers/net/vsc9953: Add commands to enable/disable HW learning Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-08-08 0:30 ` York Sun [this message]
2015-08-10 8:44 ` Codrin Constantin Ciubotariu
2015-08-10 19:41 ` York Sun
2015-08-10 19:57 ` Joe Hershberger
2015-08-10 20:03 ` York Sun
2015-08-10 20:05 ` Joe Hershberger
2015-08-10 20:45 ` York Sun
2015-08-12 19:58 ` York Sun
2015-08-13 7:33 ` Codrin Constantin Ciubotariu
2015-08-13 15:42 ` Codrin Constantin Ciubotariu
2015-08-13 15:54 ` York Sun
2015-08-14 8:28 ` Codrin Constantin Ciubotariu
2015-08-14 17:59 ` York Sun
2015-08-17 14:37 ` Joe Hershberger
2015-08-17 15:17 ` York Sun
2015-08-19 7:21 ` Codrin Constantin Ciubotariu
2015-07-24 13:55 ` [U-Boot] [PATCH v3 12/16] drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953 Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 13/16] drivers/net/vsc9953: Add VLAN commands " Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 14/16] drivers/net/vsc9953: Add command for shared/private VLAN learning Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 15/16] drivers/net/vsc9953: Add commands for VLAN ingress filtering Codrin Ciubotariu
2015-08-07 20:18 ` Joe Hershberger
2015-07-24 13:55 ` [U-Boot] [PATCH v3 16/16] drivers/net/vsc9953: Add GPL-2.0+ SPDX-License-Identifier Codrin Ciubotariu
2015-08-07 20:19 ` Joe Hershberger
2015-08-07 20:17 ` [U-Boot] [PATCH v3 04/16] drivers/net/vsc9953: Fix missing reserved register Joe Hershberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C54DC2.2070401@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox