[U-Boot] [PATCH 0/3] add dfu support for at91 sam9260 based boards

[Heiko Schocher <hs@denx.de>]

Hello Marek,

Am 21.07.2015 um 04:03 schrieb Marek Vasut:
> On Monday, July 20, 2015 at 04:03:08 PM, Lukasz Majewski wrote:
>> Hi Marek,
>>
>>> add dfu supprt for at91 sam9260 based boards. The USB
>>> gadget driver is ported from linux:
>>>
>>> b2ba27a5c56ff: usb: gadget: at91_udc: move prepare clk into process
>>> context
>>>
>>> it drops a lot of checkpatch warnings/errors:
>>>
>>> checkpatch.pl found 12 error(s), 31 warning(s), 43 checks(s)
>>>
>>> but for further updates I did not fix them.
>>> The errors are all from this sort:
>>>
>>> error: drivers/usb/gadget/at91_udc.c,87: space prohibited before open
>>> square bracket '['
>>>
>>> a lot of "line over 80 characters" warnings ...
>>>
>>> Heiko Schocher (3):
>>>    ARM: at91: add cpu.h
>>>    usb: gadget: at91_udc: add support for at91_udc
>>>    at91, taurus, smartweb: add dfu support
>>
>> Marek, do you plan to review this patch series?
>>
>> (I would need at least one review before I pull the code).
>
> I took a brief look. One thing I don't quite like is the omnipresent #ifdef
> __UBOOT__ stuff. I'd much rather love to see some kind of a porting layer
> so the driver can just be picked from linux as-is, but that might be too much
> hassle.

Yes, such a layer would be beautiful, but it is possible? We have
no processes/task switching in U-Boot ... a lot of board do not use
irqs ...

> Otherwise, I'm fine with it, though I nitpicked a bit.

I just prepare a v2 ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany